@@ -81,6 +81,13 @@
gpios = <&gpiog 12 1>;
};
};
+
+ usbotg_hs_phy: usbphy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ clocks = <&rcc 0 30>;
+ clock-names = "main_clk";
+ };
};
&clk_hse {
@@ -92,3 +99,12 @@
pinctrl-names = "default";
status = "okay";
};
+
+&usbotg_hs {
+ dr_mode = "host";
+ phys = <&usbotg_hs_phy>;
+ phy-names = "usb2-phy";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
@@ -278,6 +278,26 @@
bias-disable;
};
};
+
+ usbotg_hs_pins_a: usbotg_hs@0 {
+ pins {
+ pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+ <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+ <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+ <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+ <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+ <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+ <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+ <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+ <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+ <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+ <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+ <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
};
rcc: rcc@40023810 {
@@ -318,6 +338,16 @@
st,mem2mem;
};
+ usbotg_hs: usb@40040000 {
+ compatible = "snps,dwc2";
+ dma-ranges;
+ reg = <0x40040000 0x40000>;
+ interrupts = <77>;
+ clocks = <&rcc 0 29>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
rng: rng@50060800 {
compatible = "st,stm32-rng";
reg = <0x50060800 0x400>;
This patch adds USB HS support in host mode only. This port supports OTG mode, but the device more is not working properly as of now. Once the device mode fixed, the node will be updated to support OTG. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> --- arch/arm/boot/dts/stm32429i-eval.dts | 16 ++++++++++++++++ arch/arm/boot/dts/stm32f429.dtsi | 30 ++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+)