| Message ID | 1457389310-3538-1-git-send-email-okaya@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Bjorn, Any feedback here? On 3/7/2016 5:21 PM, Sinan Kaya wrote: > The PCI_IOBASE needs to be released after hotplug removal so that it can be > re-added back by the pci_remap_iospace function during insertion. > > Adding unmap function to follow IO remap function. > > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > --- > drivers/pci/pci.c | 25 +++++++++++++++++++++++++ > include/linux/pci.h | 1 + > 2 files changed, 26 insertions(+) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 3a516c0..f5faed2 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -26,6 +26,7 @@ > #include <linux/device.h> > #include <linux/pm_runtime.h> > #include <linux/pci_hotplug.h> > +#include <linux/vmalloc.h> > #include <asm-generic/pci-bridge.h> > #include <asm/setup.h> > #include <linux/aer.h> > @@ -3169,6 +3170,30 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) > #endif > } > > +/** > + * pci_unmap_iospace - Unmap the memory mapped I/O space > + * @virt_addr: virtual address to be unmapped > + * @size: size of the physical address to be unmapped > + * > + * Unmap the CPU virtual address @virt_addr from virtual address space. > + * Only architectures that have memory mapped IO functions defined > + * (and the PCI_IOBASE value defined) should call this function. > + */ > +void __weak pci_unmap_iospace(struct resource *res) > +{ > +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) > + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; > + > + unmap_kernel_range(vaddr, resource_size(res)); > +#else > + /* > + * This architecture does not have memory mapped I/O space, > + * so this function should never be called. > + */ > + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); > +#endif > +} > + > static void __pci_set_master(struct pci_dev *dev, bool enable) > { > u16 old_cmd, cmd; > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 398ae7e..c6e3f0e 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -1172,6 +1172,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); > unsigned long pci_address_to_pio(phys_addr_t addr); > phys_addr_t pci_pio_to_address(unsigned long pio); > int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); > +void pci_unmap_iospace(struct resource *res); > > static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) > { > Sinan
Hi Sinan, On Mon, Mar 07, 2016 at 05:21:49PM -0500, Sinan Kaya wrote: > The PCI_IOBASE needs to be released after hotplug removal so that it can be > re-added back by the pci_remap_iospace function during insertion. > > Adding unmap function to follow IO remap function. > > Signed-off-by: Sinan Kaya <okaya@codeaurora.org> > --- > drivers/pci/pci.c | 25 +++++++++++++++++++++++++ > include/linux/pci.h | 1 + > 2 files changed, 26 insertions(+) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 3a516c0..f5faed2 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -26,6 +26,7 @@ > #include <linux/device.h> > #include <linux/pm_runtime.h> > #include <linux/pci_hotplug.h> > +#include <linux/vmalloc.h> > #include <asm-generic/pci-bridge.h> > #include <asm/setup.h> > #include <linux/aer.h> > @@ -3169,6 +3170,30 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) > #endif > } > > +/** > + * pci_unmap_iospace - Unmap the memory mapped I/O space > + * @virt_addr: virtual address to be unmapped > + * @size: size of the physical address to be unmapped > + * > + * Unmap the CPU virtual address @virt_addr from virtual address space. > + * Only architectures that have memory mapped IO functions defined > + * (and the PCI_IOBASE value defined) should call this function. > + */ > +void __weak pci_unmap_iospace(struct resource *res) Why is this weak? I assume probably because pci_remap_iospace() is weak, but I don't see any reason why *that* needs to be weak. There's only one implementation. I think neither one should be weak unless we have an actual need for that. > +{ > +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) > + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; > + > + unmap_kernel_range(vaddr, resource_size(res)); There really aren't any other generic uses of unmap_kernel_range(). This isn't an unusual scenario, so I would expect this code to use a pattern that's used elsewhere. > +#else > + /* > + * This architecture does not have memory mapped I/O space, > + * so this function should never be called. > + */ > + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); > +#endif > +} > + > static void __pci_set_master(struct pci_dev *dev, bool enable) > { > u16 old_cmd, cmd; > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 398ae7e..c6e3f0e 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -1172,6 +1172,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); > unsigned long pci_address_to_pio(phys_addr_t addr); > phys_addr_t pci_pio_to_address(unsigned long pio); > int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); > +void pci_unmap_iospace(struct resource *res); > > static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) > { > -- > 1.8.2.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On 4/7/2016 12:00 PM, Bjorn Helgaas wrote: > Hi Sinan, > > On Mon, Mar 07, 2016 at 05:21:49PM -0500, Sinan Kaya wrote: >> The PCI_IOBASE needs to be released after hotplug removal so that it can be >> re-added back by the pci_remap_iospace function during insertion. >> >> Adding unmap function to follow IO remap function. >> >> Signed-off-by: Sinan Kaya <okaya@codeaurora.org> >> --- >> drivers/pci/pci.c | 25 +++++++++++++++++++++++++ >> include/linux/pci.h | 1 + >> 2 files changed, 26 insertions(+) >> >> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c >> index 3a516c0..f5faed2 100644 >> --- a/drivers/pci/pci.c >> +++ b/drivers/pci/pci.c >> @@ -26,6 +26,7 @@ >> #include <linux/device.h> >> #include <linux/pm_runtime.h> >> #include <linux/pci_hotplug.h> >> +#include <linux/vmalloc.h> >> #include <asm-generic/pci-bridge.h> >> #include <asm/setup.h> >> #include <linux/aer.h> >> @@ -3169,6 +3170,30 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) >> #endif >> } >> >> +/** >> + * pci_unmap_iospace - Unmap the memory mapped I/O space >> + * @virt_addr: virtual address to be unmapped >> + * @size: size of the physical address to be unmapped >> + * >> + * Unmap the CPU virtual address @virt_addr from virtual address space. >> + * Only architectures that have memory mapped IO functions defined >> + * (and the PCI_IOBASE value defined) should call this function. >> + */ >> +void __weak pci_unmap_iospace(struct resource *res) > > Why is this weak? I assume probably because pci_remap_iospace() is > weak, but I don't see any reason why *that* needs to be weak. There's > only one implementation. I think neither one should be weak unless we > have an actual need for that. > Right, copy paste mistake. Even the function parameter description above is not right. I can get rid of the __weak from both on the next iteration. >> +{ >> +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) >> + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; >> + >> + unmap_kernel_range(vaddr, resource_size(res)); > > There really aren't any other generic uses of unmap_kernel_range(). > This isn't an unusual scenario, so I would expect this code to use a > pattern that's used elsewhere. OK, What's the best way to remove a mapping? I'm open for suggestions. I copied this pattern from GHES driver. > >> +#else >> + /* >> + * This architecture does not have memory mapped I/O space, >> + * so this function should never be called. >> + */ >> + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); >> +#endif >> +} >> + >> static void __pci_set_master(struct pci_dev *dev, bool enable) >> { >> u16 old_cmd, cmd; >> diff --git a/include/linux/pci.h b/include/linux/pci.h >> index 398ae7e..c6e3f0e 100644 >> --- a/include/linux/pci.h >> +++ b/include/linux/pci.h >> @@ -1172,6 +1172,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); >> unsigned long pci_address_to_pio(phys_addr_t addr); >> phys_addr_t pci_pio_to_address(unsigned long pio); >> int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); >> +void pci_unmap_iospace(struct resource *res); >> >> static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) >> { >> -- >> 1.8.2.1 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 3a516c0..f5faed2 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -26,6 +26,7 @@ #include <linux/device.h> #include <linux/pm_runtime.h> #include <linux/pci_hotplug.h> +#include <linux/vmalloc.h> #include <asm-generic/pci-bridge.h> #include <asm/setup.h> #include <linux/aer.h> @@ -3169,6 +3170,30 @@ int __weak pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) #endif } +/** + * pci_unmap_iospace - Unmap the memory mapped I/O space + * @virt_addr: virtual address to be unmapped + * @size: size of the physical address to be unmapped + * + * Unmap the CPU virtual address @virt_addr from virtual address space. + * Only architectures that have memory mapped IO functions defined + * (and the PCI_IOBASE value defined) should call this function. + */ +void __weak pci_unmap_iospace(struct resource *res) +{ +#if defined(PCI_IOBASE) && defined(CONFIG_MMU) + unsigned long vaddr = (unsigned long)PCI_IOBASE + res->start; + + unmap_kernel_range(vaddr, resource_size(res)); +#else + /* + * This architecture does not have memory mapped I/O space, + * so this function should never be called. + */ + WARN_ONCE(1, "This architecture does not support memory mapped I/O\n"); +#endif +} + static void __pci_set_master(struct pci_dev *dev, bool enable) { u16 old_cmd, cmd; diff --git a/include/linux/pci.h b/include/linux/pci.h index 398ae7e..c6e3f0e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1172,6 +1172,7 @@ int pci_register_io_range(phys_addr_t addr, resource_size_t size); unsigned long pci_address_to_pio(phys_addr_t addr); phys_addr_t pci_pio_to_address(unsigned long pio); int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); +void pci_unmap_iospace(struct resource *res); static inline pci_bus_addr_t pci_bus_address(struct pci_dev *pdev, int bar) {
The PCI_IOBASE needs to be released after hotplug removal so that it can be re-added back by the pci_remap_iospace function during insertion. Adding unmap function to follow IO remap function. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> --- drivers/pci/pci.c | 25 +++++++++++++++++++++++++ include/linux/pci.h | 1 + 2 files changed, 26 insertions(+)