@@ -147,6 +147,65 @@ Example:
clocks = <&clk32k>;
};
+SHDWC Shutdown Controller (Alternative)
+
+1) shdwc node
+
+required properties:
+- compatible: should be "atmel,sama5d2-shdwc".
+- reg: should contain registers location and length
+- clocks: phandle to input clock.
+- #address-cells: should be one. The cell is the wake-up input index.
+- #size-cells: should be zero.
+
+optional properties:
+
+- debounce-delay-us: minimum wake-up inputs debouncer period in
+ microseconds. It's usually a board-related property.
+- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
+
+The node contains child nodes for each wake-up input that the platform uses.
+
+2) input nodes
+
+Wake-up input nodes are usually described in the "board" part of the Device
+Tree. Note also that input 0 is linked to the wake-up pin and is frequently
+used.
+
+Required properties:
+- reg: should contain the wake-up input index [0 - 15].
+
+Optional properties:
+- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
+ by the child, forces the wake-up of the core power supply on a high level.
+ The default is to be active low.
+
+Example:
+
+On the SoC side:
+ shdwc@f8048010 {
+ compatible = "atmel,sama5d2-shdwc";
+ reg = <0xf8048010 0x10>;
+ clocks = <&clk32k>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ };
+
+On the board side:
+ shdwc@f8048010 {
+ debounce-delay-us = <976>;
+
+ input@0 {
+ reg = <0>;
+ };
+
+ input@1 {
+ reg = <1>;
+ atmel,wakeup-active-high;
+ };
+ };
+
Special Function Registers (SFR)
Special Function Registers (SFR) manage specific aspects of the integrated
The new shutdown controller compatible with sama5d2 has a new binding documentation and properties. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: devicetree@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> --- Changes in v4: - change property to debounce-delay-us so that we can use a generic property and we can have the unit explicitly included it the name according to Documentation/devicetree/bindings/property-units.txt. - move to atmel,wakeup-active-high boolean property instead of a "high", "low" string comparison. Changes in v3: - get and use slow clock and specify its handler in binding Changes in v2: None .../devicetree/bindings/arm/atmel-at91.txt | 59 ++++++++++++++++++++++ 1 file changed, 59 insertions(+)