[v2,4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board

Message ID	1458050668-26748-5-git-send-email-gary.bisson@boundarydevices.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Gary Bisson <gary.bisson@boundarydevices.com> To: devicetree@vger.kernel.org Subject: [PATCH v2 4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board Date: Tue, 15 Mar 2016 15:04:23 +0100 Message-Id: <1458050668-26748-5-git-send-email-gary.bisson@boundarydevices.com> In-Reply-To: <1458050668-26748-1-git-send-email-gary.bisson@boundarydevices.com> References: <1458037826-19375-1-git-send-email-gary.bisson@boundarydevices.com> <1458050668-26748-1-git-send-email-gary.bisson@boundarydevices.com> Precedence: list Cc: linux@arm.linux.org.uk, mturquette@baylibre.com, troy.kisky@boundarydevices.com, Gary Bisson <gary.bisson@boundarydevices.com>, robh+dt@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com, shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2bfce0f..fd67d8d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -369,6 +369,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ + imx7d-nitrogen7.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts new file mode 100644 index 0000000..a5124d8 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -0,0 +1,818 @@ +/* + * Copyright 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx7d.dtsi" + +/ { + model = "Boundary Devices i.MX7 Nitrogen7 Board"; + compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; + + aliases { + fb_lcd = &lcdif; + t_lcd = &t_lcd; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + backlight_j9 { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_j9>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-on; + }; + + backlight_j20 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; + }; + + reg_vref_1v8: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vref_3v3: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan: regulator@5 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; + clock-names = "slow"; + regulator-name = "reg_wlan"; + startup-delay-us = <70000>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&adc1 { + vref-supply = <&reg_vref_1v8>; + status = "okay"; +}; + +&adc2 { + vref-supply = <&reg_vref_1v8>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, + <&clks IMX7D_CLKO2_ROOT_DIV>; + assigned-clock-parents = <&clks IMX7D_CKIL>; + assigned-clock-rates = <0>, <32768>; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <&ethphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + }; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <&reg_can2_3v3>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + rtc@68 { + compatible = "rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touch@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_tsc2004>; + interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clock-names = "mclk"; + wlf,shared-lrclk; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + lcd-supply = <&reg_vref_3v3>; + display = <&display0>; + status = "okay"; + + display0: lcd-display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&t_lcd>; + t_lcd: t_lcd_default { + /* default to Okaya display */ + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <48>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + control-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>; + uart-has-rs485-half-duplex; + rs485-mode = <1>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <&reg_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <&reg_usb_otg2_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vgen3_reg>; + bus-width = <4>; + fsl,tuning-step = <2>; + wakeup-source; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <&reg_wlan>; + vqmmc-1-8-v; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>; + + imx7d-nitrogen7 { + pinctrl_hog_1: hoggrp-1 { + fsl,pins = < + MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d + >; + }; + + pinctrl_bt_rfkill: btrfkillgrp { + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x7d + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11 + MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75 /* Reset */ + >; + }; + + pinctrl_flash: flashgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x71 + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x71 + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x7d + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x7d + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x71 + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x71 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x7d + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x7d + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x7d + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c2_rv4162: i2c2-rv4162grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x7d + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c3_tsc2004: i2c3tsc2004grp { + fsl,pins = < + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79 + MX7D_PAD_SD2_WP__GPIO5_IO10 0x7d + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f + MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_j2: j2grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x7d + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x7d + MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x7d + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x7d + MX7D_PAD_SD1_WP__GPIO5_IO1 0x7d + MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x7d + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x7d + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x7d + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x7d + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x7d + MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x7d + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x7d + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x7d + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x7d + MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x7d + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x7d + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x7d + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x7d + MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x7d + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x7d + MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x7d + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x7d + MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x7d + MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x7d + MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x7d + MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x7d + MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x7d + MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x7d + MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x7d + MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x7d + MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x7d + MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x7d + MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x7d + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x7d + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x7d + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x79 + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x79 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7d + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 + MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79 + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79 + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x7d + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 + MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 + MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 + MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x7d + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x75 + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x75 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x59 + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; + }; +}; + +&iomuxc_lpsr { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_2>; + + imx7d-nitrogen7 { + pinctrl_hog_2: hoggrp-2 { + fsl,pins = < + MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x7d + MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x7d + >; + }; + + pinctrl_backlight_j9: backlightj9grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x7d + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x7d + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x7d + MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x75 + >; + }; + }; +};

[v2,4/9] ARM: dts: imx: add Boundary Devices Nitrogen7 board

Commit Message

Patch