diff mbox

[1/4] ARM: dts: qcom: msm8974: Add USB gadget nodes

Message ID 1459215159-2576-1-git-send-email-bjorn.andersson@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Bjorn Andersson March 29, 2016, 1:32 a.m. UTC 
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>

Add the necessary nodes for USB gadget on MSM8974 and enable these for
Honami.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 .../boot/dts/qcom-msm8974-sony-xperia-honami.dts   |  8 +++++
 arch/arm/boot/dts/qcom-msm8974.dtsi                | 38 ++++++++++++++++++++++
 2 files changed, 46 insertions(+)

Comments

kernel test robot March 29, 2016, 3:41 a.m. UTC | #1 
Hi Bjorn,

[auto build test ERROR on v4.6-rc1]
[also build test ERROR on next-20160329]
[cannot apply to robh/for-next]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Bjorn-Andersson/ARM-dts-qcom-msm8974-Add-USB-gadget-nodes/20160329-093758
config: arm-multi_v7_defconfig (attached as .config)
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> Error: arch/arm/boot/dts/qcom-msm8974.dtsi:510.19-20 syntax error
   FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index a0398b69f4f2..453eede25a43 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -367,6 +367,14 @@ 
 		};
 
 	};
+
+	usb-phy@f9a55000 {
+		status = "ok";
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+	};
 };
 
 &spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ef5330578431..927075137b76 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -489,6 +489,44 @@ 
 			#dma-cells = <1>;
 			qcom,ee = <0>;
 		};
+
+		usb1_phy: usb-phy@f9a55000 {
+			compatible = "qcom,usb-otg-snps";
+
+			reg = <0xf9a55000 0x400>;
+			interrupts-extended = <&intc 0 134 0>, <&intc 0 140 0>,
+				<&spmi_bus 0 0x9 0 0>;
+			interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
+
+			vddcx-supply = <&pm8841_s2>;
+			v3p3-supply = <&pm8941_l24>;
+			v1p8-supply = <&pm8941_l6>;
+
+			dr_mode = "otg";
+			qcom,phy-init-sequence = <0x63 0x81 0xfffffff>;
+			qcom,otg-control = <1>;
+			qcom,phy-num = <0>;
+
+			resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>;
+			reset-names = "phy", "link";
+
+			clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
+				<&gcc GCC_USB_HS_AHB_CLK>;
+			clock-names = "phy", "core", "iface";
+
+			status = "disabled";
+		};
+
+		usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x400>;
+			dr_mode = "otg";
+			interrupts = <0 134 0>, <0 140 0>;
+			interrupt-names = "core_irq", "async_irq";
+			usb-phy = <&usb1_phy>;
+
+			status = "disabled";
+		};
 	};
 
 	smd {