@@ -19,6 +19,7 @@
#include <asm/cacheflush.h>
#include <linux/ctype.h>
+#include <linux/delay.h>
#include <linux/edac.h>
#include <linux/genalloc.h>
#include <linux/interrupt.h>
@@ -550,6 +551,7 @@ module_platform_driver(altr_edac_driver);
const struct edac_device_prv_data ocramecc_data;
const struct edac_device_prv_data l2ecc_data;
+const struct edac_device_prv_data a10_ocramecc_data;
const struct edac_device_prv_data a10_l2ecc_data;
static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
@@ -674,6 +676,16 @@ static const struct file_operations altr_edac_device_inject_fops = {
.llseek = generic_file_llseek,
};
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject_fops = {
+ .open = simple_open,
+ .write = altr_edac_a10_device_trig,
+ .llseek = generic_file_llseek,
+};
+
static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
const struct edac_device_prv_data *priv)
{
@@ -701,6 +713,8 @@ static const struct of_device_id altr_edac_device_of_match[] = {
#ifdef CONFIG_EDAC_ALTERA_OCRAM
{ .compatible = "altr,socfpga-ocram-ecc",
.data = (void *)&ocramecc_data },
+ { .compatible = "altr,socfpga-a10-ocram-ecc",
+ .data = (void *)&a10_ocramecc_data },
#endif
{},
};
@@ -889,6 +903,24 @@ const struct edac_device_prv_data ocramecc_data = {
.inject_fops = &altr_edac_device_inject_fops,
};
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+ bool sberr);
+
+const struct edac_device_prv_data a10_ocramecc_data = {
+ .setup = altr_check_ecc_deps,
+ .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+ .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+ .irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
+ .dbgfs_name = "altr_ocram_trigger",
+ .ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
+ .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+ .ce_set_mask = ALTR_A10_ECC_TSERRA,
+ .ue_set_mask = ALTR_A10_ECC_TDERRA,
+ .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+ .ecc_irq_handler = altr_edac_a10_ecc_irq,
+ .inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
#endif /* CONFIG_EDAC_ALTERA_OCRAM */
/********************* L2 Cache EDAC Device Functions ********************/
@@ -1007,6 +1039,173 @@ const struct edac_device_prv_data a10_l2ecc_data = {
* Based on xgene_edac.c peripheral code.
*/
+static void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value |= bit_mask;
+ writel(value, ioaddr);
+}
+
+static void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ value &= ~bit_mask;
+ writel(value, ioaddr);
+}
+
+static int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+ u32 value = readl(ioaddr);
+
+ return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+ int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+ u32 init_mask = ALTR_A10_ECC_INITA;
+ u32 stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+ u32 clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+ int ret = 0;
+
+ if (port) {
+ init_mask = ALTR_A10_ECC_INITB;
+ stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+ clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+ }
+
+ ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+ while (limit--) {
+ if (ecc_test_bits(stat_mask,
+ (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+ break;
+ udelay(1);
+ }
+ if (limit < 0)
+ ret = -EBUSY;
+
+ /* Clear any pending ECC interrupts */
+ writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+ return ret;
+}
+
+/*
+ * Aside from the L2 ECC, the Arria10 ECC memories have a common register
+ * layout so the following functions can be shared between all peripherals.
+ */
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+ u32 ecc_ctrl_en_mask, bool dual_port)
+{
+ int ret = 0;
+ void __iomem *ecc_block_base;
+ struct regmap *ecc_mgr_map;
+ char *ecc_name = (char *)np->name;
+ struct device_node *np_parent = of_get_parent(np);
+
+ ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_parent,
+ "altr,sysmgr-syscon");
+ of_node_put(np_parent);
+ if (IS_ERR(ecc_mgr_map)) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "Unable to get syscon altr,sysmgr-syscon\n");
+ return -ENODEV;
+ }
+
+ /* Map the ECC Block */
+ ecc_block_base = of_iomap(np, 0);
+ if (!ecc_block_base) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "Unable to map %s ECC block\n", ecc_name);
+ return -ENODEV;
+ }
+
+ /* Disable ECC */
+ regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+ ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ ecc_clear_bits(ecc_ctrl_en_mask,
+ (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+ /* Use HW initialization block to initialize memory for ECC */
+ ret = altr_init_memory_port(ecc_block_base, 0);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "ECC: cannot init %s PORTA memory\n", ecc_name);
+ goto out;
+ }
+
+ if (dual_port) {
+ ret = altr_init_memory_port(ecc_block_base, 1);
+ if (ret) {
+ edac_printk(KERN_ERR, EDAC_DEVICE,
+ "ECC: cannot init %s PORTA memory\n",
+ ecc_name);
+ goto out;
+ }
+ }
+
+ /* Enable ECC */
+ ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+ ALTR_A10_ECC_CTRL_OFST));
+ ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+ (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+ regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+ /* Ensure all writes complete */
+ wmb();
+out:
+ return ret;
+}
+
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct edac_device_ctl_info *edac_dci = file->private_data;
+ struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+ const struct edac_device_prv_data *priv = drvdata->data;
+ void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+ unsigned long flags;
+ u8 trig_type;
+
+ if (!user_buf || get_user(trig_type, user_buf))
+ return -EFAULT;
+
+ local_irq_save(flags);
+ if (trig_type == ALTR_UE_TRIGGER_CHAR)
+ writel(priv->ue_set_mask, set_addr);
+ else
+ writel(priv->ce_set_mask, set_addr);
+ /* Ensure the interrupt test bits are set */
+ wmb();
+ local_irq_restore(flags);
+
+ return count;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+ bool sberr)
+{
+ void __iomem *base = dci->base;
+
+ if (sberr) {
+ writel(ALTR_A10_ECC_SERRPENA,
+ base + ALTR_A10_ECC_INTSTAT_OFST);
+ edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+ } else {
+ writel(ALTR_A10_ECC_DERRPENA,
+ base + ALTR_A10_ECC_INTSTAT_OFST);
+ edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+ panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+ }
+ return IRQ_HANDLED;
+}
+
static irqreturn_t altr_edac_a10_irq_handler(int irq, void *dev_id)
{
irqreturn_t rc = IRQ_NONE;
@@ -1171,6 +1370,9 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
continue;
if (of_device_is_compatible(child, "altr,socfpga-a10-l2-ecc"))
altr_edac_a10_device_add(edac, child);
+ else if (of_device_is_compatible(child,
+ "altr,socfpga-a10-ocram-ecc"))
+ altr_edac_a10_device_add(edac, child);
}
return 0;
@@ -19,6 +19,7 @@
#define _ALTERA_EDAC_H
#include <linux/edac.h>
+#include <linux/irq.h>
#include <linux/types.h>
/* SDRAM Controller CtrlCfg Register */
@@ -220,9 +221,41 @@ struct altr_sdram_mc_data {
#define ALTR_L2_ECC_INJD BIT(2)
/* Arria10 General ECC Block Module Defines */
+#define ALTR_A10_ECC_CTRL_OFST 0x08
+#define ALTR_A10_ECC_EN BIT(0)
+#define ALTR_A10_ECC_INITA BIT(16)
+#define ALTR_A10_ECC_INITB BIT(24)
+
+#define ALTR_A10_ECC_INITSTAT_OFST 0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST 0x10
+#define ALTR_A10_ECC_SERRINTEN BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST 0x20
+#define ALTR_A10_ECC_SERRPENA BIT(0)
+#define ALTR_A10_ECC_DERRPENA BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK (ALTR_A10_ECC_SERRPENA | \
+ ALTR_A10_ECC_DERRPENA)
+#define ALTR_A10_ECC_SERRPENB BIT(16)
+#define ALTR_A10_ECC_DERRPENB BIT(24)
+#define ALTR_A10_ECC_ERRPENB_MASK (ALTR_A10_ECC_SERRPENB | \
+ ALTR_A10_ECC_DERRPENB)
+
+#define ALTR_A10_ECC_INTTEST_OFST 0x24
+#define ALTR_A10_ECC_TSERRA BIT(0)
+#define ALTR_A10_ECC_TDERRA BIT(8)
+
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST 0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM BIT(1)
+
#define A10_SYSMGR_ECC_INTSTAT_SERR_OFST 0x9C
#define A10_SYSMGR_ECC_INTSTAT_DERR_OFST 0xA0
#define A10_SYSMGR_ECC_INTSTAT_L2 BIT(0)
+#define A10_SYSMGR_ECC_INTSTAT_OCRAM BIT(1)
#define A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST 0xA8
#define A10_SYSGMR_MPU_CLEAR_L2_ECC_SB BIT(15)
@@ -245,6 +278,9 @@ struct altr_sdram_mc_data {
#define ALTR_A10_L2_ECC_CE_INJ_MASK 0x00000101
#define ALTR_A10_L2_ECC_UE_INJ_MASK 0x00010101
+/* Arria 10 OCRAM ECC Management Group Defines */
+#define ALTR_A10_OCRAM_ECC_EN_CTL (BIT(1) | BIT(0))
+
struct altr_edac_device_dev;
struct edac_device_prv_data {
@@ -288,4 +324,10 @@ struct altr_arria10_edac {
struct list_head a10_ecc_devices;
};
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000
+
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+ u32 ecc_ctrl_en_mask, bool dual_port);
+
#endif /* #ifndef _ALTERA_EDAC_H */