@@ -1024,34 +1024,15 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
int thislen)
{
struct onenand_chip *this = mtd->priv;
- struct nand_oobfree *free;
- int readcol = column;
- int readend = column + thislen;
- int lastgap = 0;
- unsigned int i;
- uint8_t *oob_buf = this->oob_buf;
-
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- if (readcol >= lastgap)
- readcol += free->offset - lastgap;
- if (readend >= lastgap)
- readend += free->offset - lastgap;
- lastgap = free->offset + free->length;
- }
- this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- int free_end = free->offset + free->length;
- if (free->offset < readend && free_end > readcol) {
- int st = max_t(int,free->offset,readcol);
- int ed = min_t(int,free_end,readend);
- int n = ed - st;
- memcpy(buf, oob_buf + st, n);
- buf += n;
- } else if (column == 0)
- break;
- }
+ int ret;
+
+ this->read_bufferram(mtd, ONENAND_SPARERAM, this->oob_buf, 0,
+ mtd->oobsize);
+ ret = mtd_ooblayout_get_databytes(mtd, buf, this->oob_buf,
+ column, thislen);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -1808,34 +1789,7 @@ static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
const u_char *buf, int column, int thislen)
{
- struct onenand_chip *this = mtd->priv;
- struct nand_oobfree *free;
- int writecol = column;
- int writeend = column + thislen;
- int lastgap = 0;
- unsigned int i;
-
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- if (writecol >= lastgap)
- writecol += free->offset - lastgap;
- if (writeend >= lastgap)
- writeend += free->offset - lastgap;
- lastgap = free->offset + free->length;
- }
- free = this->ecclayout->oobfree;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
- int free_end = free->offset + free->length;
- if (free->offset < writeend && free_end > writecol) {
- int st = max_t(int,free->offset,writecol);
- int ed = min_t(int,free_end,writeend);
- int n = ed - st;
- memcpy(oob_buf + st, buf, n);
- buf += n;
- } else if (column == 0)
- break;
- }
- return 0;
+ return mtd_ooblayout_set_databytes(mtd, buf, oob_buf, column, thislen);
}
/**
@@ -4037,10 +3991,11 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
* The number of bytes available for a client to place data into
* the out of band area
*/
- mtd->oobavail = 0;
- for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
- this->ecclayout->oobfree[i].length; i++)
- mtd->oobavail += this->ecclayout->oobfree[i].length;
+ ret = mtd_ooblayout_count_freebytes(mtd);
+ if (ret < 0)
+ ret = 0;
+
+ mtd->oobavail = ret;
mtd->ecclayout = this->ecclayout;
mtd->ecc_strength = 1;
The mtd_ooblayout_xxx() helper functions have been added to avoid direct accesses to the ecclayout field, and thus ease for future reworks. Use these helpers in all places where the oobfree[] and eccpos[] arrays where directly accessed. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/mtd/onenand/onenand_base.c | 75 ++++++++------------------------------ 1 file changed, 15 insertions(+), 60 deletions(-)