diff mbox

[v3,1/9] ARM: dts: imx7d: add lcdif support

Message ID 1459614351-16731-2-git-send-email-gary.bisson@boundarydevices.com (mailing list archive)
State New, archived
Headers show

Commit Message

Gary Bisson April 2, 2016, 4:25 p.m. UTC 
Add the device node for the i.MX7 eLCDIF interface.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---

Changes v1 -> v2:
- none
Changes v2 -> v3:
- Re-order lcdif node by unit-address order

---
 arch/arm/boot/dts/imx7d.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Shawn Guo April 6, 2016, 9:06 a.m. UTC | #1 
On Sat, Apr 02, 2016 at 06:25:43PM +0200, Gary Bisson wrote:
> Add the device node for the i.MX7 eLCDIF interface.
> 
> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>

Applied 1 ~ 3, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b5a50e0..2547e16 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -651,6 +651,17 @@ 
 				#pwm-cells = <2>;
 				status = "disabled";
 			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
 		};
 
 		aips3: aips-bus@30800000 {