@@ -302,7 +302,15 @@
};
spi0: spi@10600 {
- reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>;
+ reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28 /* control */
+ MBUS_ID(0x01, 0x1e) 0 0x100000 /* CS0 */
+ MBUS_ID(0x01, 0x5e) 0 0x100000 /* CS1 */
+ MBUS_ID(0x01, 0x9e) 0 0x100000 /* CS2 */
+ MBUS_ID(0x01, 0xde) 0 0x100000 /* CS3 */
+ MBUS_ID(0x01, 0x1f) 0 0x100000 /* CS4 */
+ MBUS_ID(0x01, 0x5f) 0 0x100000 /* CS5 */
+ MBUS_ID(0x01, 0x9f) 0 0x100000 /* CS6 */
+ MBUS_ID(0x01, 0xdf) 0 0x100000>; /* CS7 */
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
@@ -312,7 +320,15 @@
};
spi1: spi@10680 {
- reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>;
+ reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28 /* control */
+ MBUS_ID(0x01, 0x1a) 0 0x100000 /* CS0 */
+ MBUS_ID(0x01, 0x5a) 0 0x100000 /* CS1 */
+ MBUS_ID(0x01, 0x9a) 0 0x100000 /* CS2 */
+ MBUS_ID(0x01, 0xda) 0 0x100000 /* CS3 */
+ MBUS_ID(0x01, 0x1b) 0 0x100000 /* CS4 */
+ MBUS_ID(0x01, 0x5b) 0 0x100000 /* CS5 */
+ MBUS_ID(0x01, 0x9b) 0 0x100000 /* CS6 */
+ MBUS_ID(0x01, 0xdb) 0 0x100000>; /* CS7 */
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
This patch adds the static MBus mappings for all supported SPI devices (8 per controller) for the direct access SPI mode. They can be configured and enabled by setting these MBus mapping in the 'ranges' property of the per-board 'soc' node. If nothing is changed here, the default 'normal' (indirect) SPI mode is used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedameon.net> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> --- arch/arm/boot/dts/armada-370-xp.dtsi | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)