@@ -577,7 +577,7 @@ EXPORT_SYMBOL(davinci_set_pllrate);
* than that used by default in <soc>.c file. The reference clock rate
* should be updated early in the boot process; ideally soon after the
* clock tree has been initialized once with the default reference clock
- * rate (davinci_common_init()).
+ * rate (davinci_clk_init()).
*
* Returns 0 on success, error otherwise.
*/
@@ -108,12 +108,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
if (ret < 0)
goto err;
- if (davinci_soc_info.cpu_clks) {
- ret = davinci_clk_init(davinci_soc_info.cpu_clks);
-
- if (ret != 0)
- goto err;
- }
return;
@@ -1214,4 +1214,6 @@ void __init da830_init(void)
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
+
+ davinci_clk_init(davinci_soc_info_da830.cpu_clks);
}
@@ -1346,4 +1346,6 @@ void __init da850_init(void)
v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+ davinci_clk_init(davinci_soc_info_da850.cpu_clks);
}
@@ -1052,6 +1052,7 @@ void __init dm355_init(void)
{
davinci_common_init(&davinci_soc_info_dm355);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm355.cpu_clks);
}
int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
@@ -1176,6 +1176,7 @@ void __init dm365_init(void)
{
davinci_common_init(&davinci_soc_info_dm365);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm365.cpu_clks);
}
static struct resource dm365_vpss_resources[] = {
@@ -932,6 +932,7 @@ void __init dm644x_init(void)
{
davinci_common_init(&davinci_soc_info_dm644x);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm644x.cpu_clks);
}
int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
@@ -956,6 +956,7 @@ void __init dm646x_init(void)
{
davinci_common_init(&davinci_soc_info_dm646x);
davinci_map_sysmod();
+ davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
}
static int __init dm646x_init_devices(void)
Some clocks (such as the USB PHY clocks in DA8xx) will need to use iomem. The davinci_common_init() function must be called before the ioremap, so the clock init is now split out as separate function. Signed-off-by: David Lechner <david@lechnology.com> --- v4 changes: * no longer wrapping davinci_clk_init() since it does not return an error. arch/arm/mach-davinci/clock.c | 2 +- arch/arm/mach-davinci/common.c | 6 ------ arch/arm/mach-davinci/da830.c | 2 ++ arch/arm/mach-davinci/da850.c | 2 ++ arch/arm/mach-davinci/dm355.c | 1 + arch/arm/mach-davinci/dm365.c | 1 + arch/arm/mach-davinci/dm644x.c | 1 + arch/arm/mach-davinci/dm646x.c | 1 + 8 files changed, 9 insertions(+), 7 deletions(-)