@@ -959,7 +959,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
break;
case NAND_ECC_SOFT:
- case NAND_ECC_SOFT_BCH:
if (nand->ecc.algo == NAND_ECC_BCH) {
dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
break;
@@ -974,7 +973,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
- if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
+ if (nand->ecc.mode == NAND_ECC_HW) {
switch (mtd->oobsize) {
case 16:
case 64:
@@ -179,7 +179,6 @@ static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *de
chip->ecc.correct = jz4780_nand_ecc_correct;
/* fall through */
case NAND_ECC_SOFT:
- case NAND_ECC_SOFT_BCH:
dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->bch) ? "hardware BCH" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
@@ -4084,8 +4084,7 @@ static int nand_set_ecc_soft_ops(struct mtd_info *mtd)
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- if (WARN_ON(ecc->mode != NAND_ECC_SOFT &&
- ecc->mode != NAND_ECC_SOFT_BCH))
+ if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
return -EINVAL;
switch (ecc->algo) {
@@ -4218,7 +4217,7 @@ int nand_scan_tail(struct mtd_info *mtd)
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- (ecc->mode == NAND_ECC_SOFT || ecc->mode == NAND_ECC_SOFT_BCH) &&
+ ecc->mode == NAND_ECC_SOFT &&
ecc->algo != NAND_ECC_BCH) {
switch (mtd->oobsize) {
case 8:
@@ -4313,13 +4312,11 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->algo = NAND_ECC_HAMMING;
case NAND_ECC_SOFT:
- case NAND_ECC_SOFT_BCH:
ret = nand_set_ecc_soft_ops(mtd);
if (ret) {
ret = -EINVAL;
goto err_free;
}
-
break;
case NAND_ECC_NONE:
@@ -4402,7 +4399,6 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Large page NAND with SOFT_ECC should support subpage reads */
switch (ecc->mode) {
case NAND_ECC_SOFT:
- case NAND_ECC_SOFT_BCH:
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
@@ -4502,8 +4498,7 @@ void nand_release(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- if ((chip->ecc.mode == NAND_ECC_SOFT ||
- chip->ecc.mode == NAND_ECC_SOFT_BCH) &&
+ if (chip->ecc.mode == NAND_ECC_SOFT &&
chip->ecc.algo == NAND_ECC_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
@@ -2339,7 +2339,7 @@ static int __init ns_init_module(void)
retval = -EINVAL;
goto error;
}
- chip->ecc.mode = NAND_ECC_SOFT_BCH;
+ chip->ecc.mode = NAND_ECC_SOFT;
chip->ecc.algo = NAND_ECC_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
@@ -1612,8 +1612,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
return -EINVAL;
switch (ecc->mode) {
- case NAND_ECC_SOFT_BCH:
- break;
case NAND_ECC_HW:
ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);
if (ret)
@@ -116,7 +116,6 @@ typedef enum {
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
- NAND_ECC_SOFT_BCH,
} nand_ecc_modes_t;
enum nand_ecc_algo {
This value should not be part of nand_ecc_modes_t as it specifies algorithm not a mode. We successfully managed to introduce new "algo" field which is respected now. Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> --- drivers/mtd/nand/fsmc_nand.c | 3 +-- drivers/mtd/nand/jz4780_nand.c | 1 - drivers/mtd/nand/nand_base.c | 11 +++-------- drivers/mtd/nand/nandsim.c | 2 +- drivers/mtd/nand/sunxi_nand.c | 2 -- include/linux/mtd/nand.h | 1 - 6 files changed, 5 insertions(+), 15 deletions(-)