[v2,02/11] doc/devicetree: Add Aspeed VIC bindings

Commit Message

Joel Stanley April 21, 2016, 8:04 a.m. UTC

Signed-off-by: Joel Stanley <[e-mail]>
---
 .../interrupt-controller/aspeed,ast2400-vic.txt    | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
new file mode 100644
index 000000000000..10ed0c20ee6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
@@ -0,0 +1,24 @@ 
+Aspeed Vectored Interrupt Controller
+
+These bindings are for the Aspeed AST2400 interrupt controller register layout.
+The SoC has an legacy register layout, but this driver does not support that
+mode of operation.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-vic".
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- valid-sources : bitmask of valid irq sources
+
+Example:
+
+ vic: interrupt-controller {
+      compatible = "aspeed,ast2400-new-vic";
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      valid-sources = < 0xffffffff 0x0007ffff>;
+      reg = <0x1e6c0080 0x80>;
+ };