diff mbox

[v6,7/7] ARM: dts: DRA7: Add dt nodes for PWMSS

Message ID 1461343238-29274-8-git-send-email-fcooper@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Franklin Cooper April 22, 2016, 4:40 p.m. UTC 
From: Vignesh R <vigneshr@ti.com>

Add PWMSS device tree nodes for DRA7 SoC family and add documentation
for dt bindings.

Signed-off-by: Vignesh R <vigneshr@ti.com>
[fcooper@ti.com: Add eCAP and use updated bindings for PWMSS and ePWM]
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
 .../devicetree/bindings/pwm/pwm-tiecap.txt         |  9 +++
 .../devicetree/bindings/pwm/pwm-tiehrpwm.txt       |  9 +++
 .../devicetree/bindings/pwm/pwm-tipwmss.txt        | 15 +++-
 arch/arm/boot/dts/dra7.dtsi                        | 90 ++++++++++++++++++++++
 4 files changed, 122 insertions(+), 1 deletion(-)

Comments

Rob Herring April 25, 2016, 1:05 p.m. UTC | #1 
On Fri, Apr 22, 2016 at 11:40:38AM -0500, Franklin S Cooper Jr wrote:
> From: Vignesh R <vigneshr@ti.com>
> 
> Add PWMSS device tree nodes for DRA7 SoC family and add documentation
> for dt bindings.
> 
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> [fcooper@ti.com: Add eCAP and use updated bindings for PWMSS and ePWM]
> Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> ---
>  .../devicetree/bindings/pwm/pwm-tiecap.txt         |  9 +++
>  .../devicetree/bindings/pwm/pwm-tiehrpwm.txt       |  9 +++
>  .../devicetree/bindings/pwm/pwm-tipwmss.txt        | 15 +++-
>  arch/arm/boot/dts/dra7.dtsi                        | 90 ++++++++++++++++++++++
>  4 files changed, 122 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 39277b6..2e1c1f1 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -4,6 +4,7 @@  Required properties:
 - compatible: Must be "ti,<soc>-ecap".
   for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
   for da850  - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+  for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The PWM channel index ranges from 0 to 4. The only third
   cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -28,3 +29,11 @@  ecap0: ecap@0 { /* ECAP on da850 */
 	#pwm-cells = <3>;
 	reg = <0x306000 0x80>;
 };
+
+ecap0: ecap@4843e100 {
+	compatible = "ti,dra746-ecap", "ti,am3352-ecap";
+	#pwm-cells = <3>;
+	reg = <0x4843e100 0x80>;
+	clocks = <&l4_root_clk_div>;
+	clock-names = "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index ac1eae6..7eaae2a 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -4,6 +4,7 @@  Required properties:
 - compatible: Must be "ti,<soc>-ehrpwm".
   for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
   for da850  - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+  for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The only third cell flag supported by this binding is
   PWM_POLARITY_INVERTED.
@@ -28,3 +29,11 @@  ehrpwm0: pwm@300000 { /* EHRPWM on da850 */
 	#pwm-cells = <3>;
 	reg = <0x300000 0x2000>;
 };
+
+ehrpwm0: pwm@4843e200 { /* EHRPWM on dra746 */
+	compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm";
+	#pwm-cells = <3>;
+	reg = <0x48440200 0x80>;
+	clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+	clock-names = "tbclk", "fck";
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index f7eae77..29945ed 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -1,7 +1,9 @@ 
 TI SOC based PWM Subsystem
 
 Required properties:
-- compatible: Must be "ti,am33xx-pwmss";
+- compatible: Must be "ti,<soc>-pwmss".
+  for am33xx - compatible = "ti,am33xx-pwmss"
+  for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"
 - reg: physical base address and size of the registers map.
 - address-cells: Specify the number of u32 entries needed in child nodes.
 		  Should set to 1.
@@ -29,3 +31,14 @@  pwmss0: pwmss@48300000 {
 
 	/* child nodes go here */
 };
+
+epwmss0: epwmss@4843e000 { /* On DRA7xx */
+	compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+	reg = <0x4843e000 0x30>;
+	ti,hwmods = "epwmss0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	/* child nodes go here */
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e007401..5a21e46 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1743,6 +1743,96 @@ 
 				clock-names = "fck", "sys_clk";
 			};
 		};
+
+		epwmss0: epwmss@4843e000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x4843e000 0x30>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm0: pwm@4843e200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4843e200 0x80>;
+				clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap0: ecap@4843e100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x4843e100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48440000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48440000 0x30>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm1: pwm@48440200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48440200 0x80>;
+				clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap1: ecap@48440100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48440100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48442000 {
+			compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+			reg = <0x48442000 0x30>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			ehrpwm2: pwm@48442200 {
+				compatible = "ti,dra746-ehrpwm",
+					     "ti,am3352-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48442200 0x80>;
+				clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+				clock-names = "tbclk", "fck";
+				status = "disabled";
+			};
+
+			ecap2: ecap@48442100 {
+				compatible = "ti,dra746-ecap",
+					     "ti,am3352-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48442100 0x80>;
+				clocks = <&l4_root_clk_div>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
 	};
 
 	thermal_zones: thermal-zones {