| Message ID | 1461845589-4826-6-git-send-email-patrice.chotard@st.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 28 Apr 2016, patrice.chotard@st.com wrote: > From: Patrice Chotard <patrice.chotard@st.com> > > In order to prepare the ground to STMPE1600, > as STMPE1600's SYS_CTRL register has the same layout as > STMPE801 variant, unify STMPExxx_REG_SYS_CTRL_RESET/INT_EN/INT_HI > bit masks to more generic STMPE_SYS_CTRL_RESET/INT_EN/INT_HI > > Signed-off-by: Patrice Chotard <patrice.chotard@st.com> > --- > drivers/mfd/stmpe.c | 4 ++-- > drivers/mfd/stmpe.h | 6 ++---- > 2 files changed, 4 insertions(+), 6 deletions(-) Acked-by: Lee Jones <lee.jones@linaro.org> > diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c > index af682d0..2556463 100644 > --- a/drivers/mfd/stmpe.c > +++ b/drivers/mfd/stmpe.c > @@ -1089,7 +1089,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) > > if (stmpe->irq >= 0) { > if (id == STMPE801_ID) > - icr = STMPE801_REG_SYS_CTRL_INT_EN; > + icr = STMPE_SYS_CTRL_INT_EN; > else > icr = STMPE_ICR_LSB_GIM; > > @@ -1103,7 +1103,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) > if (irq_trigger == IRQF_TRIGGER_RISING || > irq_trigger == IRQF_TRIGGER_HIGH) { > if (id == STMPE801_ID) > - icr |= STMPE801_REG_SYS_CTRL_INT_HI; > + icr |= STMPE_SYS_CTRL_INT_HI; > else > icr |= STMPE_ICR_LSB_HIGH; > } > diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h > index 4ae343d..4ba1123 100644 > --- a/drivers/mfd/stmpe.h > +++ b/drivers/mfd/stmpe.h > @@ -105,6 +105,8 @@ int stmpe_remove(struct stmpe *stmpe); > #define STMPE_ICR_LSB_GIM (1 << 0) > > #define STMPE_SYS_CTRL_RESET (1 << 7) > +#define STMPE_SYS_CTRL_INT_EN (1 << 2) > +#define STMPE_SYS_CTRL_INT_HI (1 << 0) > > /* > * STMPE801 > @@ -121,10 +123,6 @@ int stmpe_remove(struct stmpe *stmpe); > #define STMPE801_REG_GPIO_SET_PIN 0x11 > #define STMPE801_REG_GPIO_DIR 0x12 > > -#define STMPE801_REG_SYS_CTRL_RESET (1 << 7) > -#define STMPE801_REG_SYS_CTRL_INT_EN (1 << 2) > -#define STMPE801_REG_SYS_CTRL_INT_HI (1 << 0) > - > /* > * STMPE811 > */
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index af682d0..2556463 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -1089,7 +1089,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (stmpe->irq >= 0) { if (id == STMPE801_ID) - icr = STMPE801_REG_SYS_CTRL_INT_EN; + icr = STMPE_SYS_CTRL_INT_EN; else icr = STMPE_ICR_LSB_GIM; @@ -1103,7 +1103,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (irq_trigger == IRQF_TRIGGER_RISING || irq_trigger == IRQF_TRIGGER_HIGH) { if (id == STMPE801_ID) - icr |= STMPE801_REG_SYS_CTRL_INT_HI; + icr |= STMPE_SYS_CTRL_INT_HI; else icr |= STMPE_ICR_LSB_HIGH; } diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index 4ae343d..4ba1123 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -105,6 +105,8 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE_ICR_LSB_GIM (1 << 0) #define STMPE_SYS_CTRL_RESET (1 << 7) +#define STMPE_SYS_CTRL_INT_EN (1 << 2) +#define STMPE_SYS_CTRL_INT_HI (1 << 0) /* * STMPE801 @@ -121,10 +123,6 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE801_REG_GPIO_SET_PIN 0x11 #define STMPE801_REG_GPIO_DIR 0x12 -#define STMPE801_REG_SYS_CTRL_RESET (1 << 7) -#define STMPE801_REG_SYS_CTRL_INT_EN (1 << 2) -#define STMPE801_REG_SYS_CTRL_INT_HI (1 << 0) - /* * STMPE811 */