@@ -5,7 +5,7 @@ CPUs in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
The enable method is specified by defining the following required
-properties in the "cpus" device tree node:
+properties in the "cpu" device tree node:
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <...>;
@@ -19,8 +19,6 @@ Example:
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
cpu0: cpu@0 {
device_type = "cpu";
@@ -32,5 +30,7 @@ Example:
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x3500417c>;
};
};
@@ -194,6 +194,7 @@ nodes to be present and contain the properties described below.
"allwinner,sun8i-a23"
"arm,psci"
"arm,realview-smp"
+ "brcm,bcm11351-cpu-method"
"brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
Commit 84320e1a635fcf90cff4185f029ce9e31bf1d4a7 ("ARM: BCM: Clean up SMP support for Broadcom Kona") moved the "secondary-boot-reg" property from the "cpus" node to the individual "cpu" nodes but negelected to update brcm,bcm11351-cpu-method.txt to match. bcm11351-cpu-method was apparently never added to the list of methods in bindings/arm/cpus.txt. bindings/arm/cpus.txt states that "enable-method" should be a property of the "cpu" node rather than the "cpus" node. This patch rectifies these two omissions and one inconsistency. Signed-off-by: Chris Brand <chris.brand@broadcom.com> --- .../devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt | 6 +++--- Documentation/devicetree/bindings/arm/cpus.txt | 1 + 2 files changed, 4 insertions(+), 3 deletions(-)