@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#define TIMER1_BASE 0x00
#define TIMER2_BASE 0x10
@@ -36,36 +37,51 @@
#define TIMER_INTR_MASK 0x38
/*
- * TIMER_CR flags:
+ * Moxart TIMER_CR flags:
*
- * TIMEREG_CR_*_CLOCK 0: PCLK, 1: EXT1CLK
- * TIMEREG_CR_*_INT overflow interrupt enable bit
+ * MOXART_CR_*_CLOCK 0: PCLK, 1: EXT1CLK
+ * MOXART_CR_*_INT overflow interrupt enable bit
*/
-#define TIMEREG_CR_1_ENABLE BIT(0)
-#define TIMEREG_CR_1_CLOCK BIT(1)
-#define TIMEREG_CR_1_INT BIT(2)
-#define TIMEREG_CR_2_ENABLE BIT(3)
-#define TIMEREG_CR_2_CLOCK BIT(4)
-#define TIMEREG_CR_2_INT BIT(5)
-#define TIMEREG_CR_3_ENABLE BIT(6)
-#define TIMEREG_CR_3_CLOCK BIT(7)
-#define TIMEREG_CR_3_INT BIT(8)
-#define TIMEREG_CR_COUNT_UP BIT(9)
-
-#define TIMER1_ENABLE (TIMEREG_CR_2_ENABLE | TIMEREG_CR_1_ENABLE)
-#define TIMER1_DISABLE (TIMEREG_CR_2_ENABLE)
-
-static void __iomem *base;
-static unsigned int clock_count_per_tick;
+#define MOXART_CR_1_ENABLE BIT(0)
+#define MOXART_CR_1_CLOCK BIT(1)
+#define MOXART_CR_1_INT BIT(2)
+#define MOXART_CR_2_ENABLE BIT(3)
+#define MOXART_CR_2_CLOCK BIT(4)
+#define MOXART_CR_2_INT BIT(5)
+#define MOXART_CR_3_ENABLE BIT(6)
+#define MOXART_CR_3_CLOCK BIT(7)
+#define MOXART_CR_3_INT BIT(8)
+#define MOXART_CR_COUNT_UP BIT(9)
+
+#define MOXART_TIMER1_ENABLE (MOXART_CR_2_ENABLE | MOXART_CR_1_ENABLE)
+#define MOXART_TIMER1_DISABLE (MOXART_CR_2_ENABLE)
+
+struct moxart_timer {
+ void __iomem *base;
+ unsigned int t1_disable_val;
+ unsigned int t1_enable_val;
+ unsigned int count_per_tick;
+ struct clock_event_device clkevt;
+ struct irqaction act;
+};
+
+static inline struct moxart_timer *to_moxart(struct clock_event_device *evt)
+{
+ return container_of(evt, struct moxart_timer, clkevt);
+}
static inline void moxart_disable(struct clock_event_device *evt)
{
- writel(TIMER1_DISABLE, base + TIMER_CR);
+ struct moxart_timer *timer = to_moxart(evt);
+
+ writel(timer->t1_disable_val, timer->base + TIMER_CR);
}
static inline void moxart_enable(struct clock_event_device *evt)
{
- writel(TIMER1_ENABLE, base + TIMER_CR);
+ struct moxart_timer *timer = to_moxart(evt);
+
+ writel(timer->t1_enable_val, timer->base + TIMER_CR);
}
static int moxart_shutdown(struct clock_event_device *evt)
@@ -77,13 +93,17 @@ static int moxart_shutdown(struct clock_event_device *evt)
static int moxart_set_oneshot(struct clock_event_device *evt)
{
moxart_disable(evt);
- writel(~0, base + TIMER1_BASE + REG_LOAD);
+ writel(~0, to_moxart(evt)->base + TIMER1_BASE + REG_LOAD);
return 0;
}
static int moxart_set_periodic(struct clock_event_device *evt)
{
- writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD);
+ struct moxart_timer *timer = to_moxart(evt);
+
+ moxart_disable(evt);
+ writel(timer->count_per_tick, timer->base + TIMER1_BASE + REG_LOAD);
+ writel(0, timer->base + TIMER1_BASE + REG_MATCH1);
moxart_enable(evt);
return 0;
}
@@ -91,30 +111,19 @@ static int moxart_set_periodic(struct clock_event_device *evt)
static int moxart_clkevt_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
+ struct moxart_timer *timer = to_moxart(evt);
u32 u;
moxart_disable(evt);
- u = readl(base + TIMER1_BASE + REG_COUNT) - cycles;
- writel(u, base + TIMER1_BASE + REG_MATCH1);
+ u = readl(timer->base + TIMER1_BASE + REG_COUNT) - cycles;
+ writel(u, timer->base + TIMER1_BASE + REG_MATCH1);
moxart_enable(evt);
return 0;
}
-static struct clock_event_device moxart_clockevent = {
- .name = "moxart_timer",
- .rating = 200,
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_state_shutdown = moxart_shutdown,
- .set_state_periodic = moxart_set_periodic,
- .set_state_oneshot = moxart_set_oneshot,
- .tick_resume = moxart_set_oneshot,
- .set_next_event = moxart_clkevt_next_event,
-};
-
static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
@@ -122,49 +131,66 @@ static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction moxart_timer_irq = {
- .name = "moxart-timer",
- .flags = IRQF_TIMER,
- .handler = moxart_timer_interrupt,
- .dev_id = &moxart_clockevent,
-};
-
static void __init moxart_timer_init(struct device_node *node)
{
int ret, irq;
unsigned long pclk;
struct clk *clk;
+ struct moxart_timer *timer;
+
+ timer = kzalloc(sizeof(*timer), GFP_KERNEL);
+ if (!timer)
+ panic("Can't allocate timer struct\n");
- base = of_iomap(node, 0);
- if (!base)
+ timer->base = of_iomap(node, 0);
+ if (!timer->base)
panic("%s: of_iomap failed\n", node->full_name);
irq = irq_of_parse_and_map(node, 0);
if (irq <= 0)
panic("%s: irq_of_parse_and_map failed\n", node->full_name);
- ret = setup_irq(irq, &moxart_timer_irq);
- if (ret)
- panic("%s: setup_irq failed\n", node->full_name);
-
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
panic("%s: of_clk_get failed\n", node->full_name);
pclk = clk_get_rate(clk);
- if (clocksource_mmio_init(base + TIMER2_BASE + REG_COUNT,
+ if (of_device_is_compatible(node, "moxa,moxart-timer")) {
+ timer->t1_enable_val = MOXART_TIMER1_ENABLE;
+ timer->t1_disable_val = MOXART_TIMER1_DISABLE;
+ } else
+ panic("%s: unknown platform\n", node->full_name);
+
+ timer->count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
+
+ timer->clkevt.name = node->name;
+ timer->clkevt.rating = 200;
+ timer->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ timer->clkevt.set_state_shutdown = moxart_shutdown;
+ timer->clkevt.set_state_periodic = moxart_set_periodic;
+ timer->clkevt.set_state_oneshot = moxart_set_oneshot;
+ timer->clkevt.tick_resume = moxart_set_oneshot;
+ timer->clkevt.set_next_event = moxart_clkevt_next_event;
+ timer->clkevt.cpumask = cpumask_of(0);
+ timer->clkevt.irq = irq;
+ timer->act.name = node->name;
+ timer->act.flags = IRQF_TIMER;
+ timer->act.handler = moxart_timer_interrupt;
+ timer->act.dev_id = &timer->clkevt;
+
+ if (clocksource_mmio_init(timer->base + TIMER2_BASE + REG_COUNT,
"moxart_timer", pclk, 200, 32,
clocksource_mmio_readl_down))
panic("%s: clocksource_mmio_init failed\n", node->full_name);
- clock_count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
-
- writel(~0, base + TIMER2_BASE + REG_LOAD);
- writel(TIMEREG_CR_2_ENABLE, base + TIMER_CR);
+ ret = setup_irq(irq, &timer->act);
+ if (ret)
+ panic("%s: setup_irq failed\n", node->full_name);
- moxart_clockevent.cpumask = cpumask_of(0);
- moxart_clockevent.irq = irq;
+ writel(~0, timer->base + TIMER2_BASE + REG_LOAD);
+ writel(timer->t1_disable_val, timer->base + TIMER_CR);
/*
* documentation is not publicly available:
@@ -172,7 +198,6 @@ static void __init moxart_timer_init(struct device_node *node)
* max_delta 0xfffffffe should be ok because count
* register size is u32
*/
- clockevents_config_and_register(&moxart_clockevent, pclk,
- 0x4, 0xfffffffe);
+ clockevents_config_and_register(&timer->clkevt, pclk, 0x4, 0xfffffffe);
}
CLOCKSOURCE_OF_DECLARE(moxart, "moxa,moxart-timer", moxart_timer_init);
Add a struct moxart_timer to hold the driver state, including the irqaction and struct clock_event_device. Most importantly this holds values for enabling and disabling the timer, so future support can be added for devices that use different bits for enable/disable. In preparation for future hardware support we add a MOXART prefix to the existing values. Signed-off-by: Joel Stanley <joel@jms.id.au> --- drivers/clocksource/moxart_timer.c | 143 ++++++++++++++++++++++--------------- 1 file changed, 84 insertions(+), 59 deletions(-)