diff mbox

[RFC,2/3] dt-bindings: reset: Add bindings for the Meson GXBB Reset Controller

Message ID 1463148012-25988-3-git-send-email-narmstrong@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Neil Armstrong May 13, 2016, 2 p.m. UTC
Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
associated include file.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../bindings/reset/amlogic,meson-gxbb-reset.txt    |  16 +++
 .../dt-bindings/reset/amlogic,meson-gxbb-reset.h   | 160 +++++++++++++++++++++
 2 files changed, 176 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt
 create mode 100644 include/dt-bindings/reset/amlogic,meson-gxbb-reset.h

Comments

Kevin Hilman May 14, 2016, 2:45 p.m. UTC | #1
Neil Armstrong <narmstrong@baylibre.com> writes:

> Add DT bindings for the Meson GXBB SoC Reset Controller documentation and the
> associated include file.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

[...]

> +#define RESET_Ethernet		19

nit: all the others are all uppercase.  This should be as well for
consistency.

Kevin
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt
new file mode 100644
index 0000000..8761317
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-gxbb-reset.txt
@@ -0,0 +1,16 @@ 
+Amlogic Meson GXBB SoC Reset Controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "amlogic,meson-gxbb-reset"
+- #reset-cells: 1, see below
+
+example:
+
+reset: reset-controller {
+	compatible = "amlogic,meson-gxbb-reset";
+	#reset-cells = <1>;
+};
diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
new file mode 100644
index 0000000..44e73b8
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h
@@ -0,0 +1,160 @@ 
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H
+
+#define RESET_VCBUS		0
+/*				1	*/
+/*				2	*/
+#define RESET_GIC		3
+#define RESET_CAPB3_DECODE	4
+#define RESET_NAND_CAPB3	5
+#define RESET_HDMITX_CAPB3	6
+#define RESET_MALI_CAPB3	7
+#define RESET_DOS_CAPB3		8
+#define RESET_SYS_CPU_CAPB3	9
+#define RESET_CBUS_CAPB3	10
+#define RESET_AHB_CNTL		11
+#define RESET_AHB_DATA		12
+#define RESET_VCBUS_CLK81	13
+#define RESET_MMC		14
+#define RESET_MIPI		15
+#define RESET_PARSER		16
+#define RESET_BLKMV		17
+#define RESET_ISA		18
+#define RESET_Ethernet		19
+#define RESET_SD_EMMC_A		20
+#define RESET_SD_EMMC_B		21
+#define RESET_SD_EMMC_C		22
+#define RESET_ROM_BOOT		23
+#define RESET_SYS_CPU_3_0	24
+#define RESET_SYS_CPU_CORE_3_0	25
+#define RESET_SYS_PLL_DIV	26
+#define RESET_SYS_CPU_AXI	27
+#define RESET_SYS_CPU_L2	28
+#define RESET_SYS_CPU_P		29
+#define RESET_SYS_CPU_MBIST	30
+/*				31	*/
+#define RESET_VD_RMEM		32
+#define RESET_AUDIN		33
+#define RESET_HDMI_TX		34
+/*				35	*/
+/*				36	*/
+/*				37	*/
+#define RESET_GE2D		38
+#define RESET_PARSER_REG	39
+#define RESET_PARSER_FETCH	40
+#define RESET_PARSER_CTL	41
+#define RESET_PARSER_TOP	42
+/*				43	*/
+/*				44	*/
+#define RESET_AO_CPU_RESET	45
+#define RESET_MALI		46
+#define RESET_HDMI_SYSTEM_RESET	47
+#define RESET_RING_OSCILLATOR	48
+#define RESET_SYS_CPU		49
+#define RESET_EFUSE		50
+#define RESET_SYS_CPU_BVCI	51
+#define RESET_AIFIFO		52
+#define RESET_TVFE		53
+#define RESET_AHB_BRIDGE_CNTL	54
+/*				55	*/
+#define RESET_AUDIO_DAC		56
+#define RESET_DEMUX_TOP		57
+#define RESET_DEMUX_DES		58
+#define RESET_DEMUX_S2P_0	59
+#define RESET_DEMUX_S2P_1	60
+#define RESET_DEMUX_RESET_0	61
+#define RESET_DEMUX_RESET_1	62
+#define RESET_DEMUX_RESET_2	63
+#define RESET_DDR_PLL		64
+#define RESET_MISC_PLL		65
+/*				66	*/
+/*				67	*/
+#define RESET_DVIN_RESET	68
+#define RESET_RDMA		69
+#define RESET_VENCI		70
+#define RESET_VENCP		71
+/*				72	*/
+#define RESET_VDAC		73
+#define RESET_RTC		74
+/*				75	*/
+#define RESET_VDI6		76
+#define RESET_VENCL		77
+#define RESET_I2C_MASTER_2	78
+#define RESET_I2C_MASTER_1	79
+#define RESET_PERIPHS_GENERAL	80
+#define RESET_PERIPHS_SPICC	81
+#define RESET_PERIPHS_SMART_CARD	82
+#define RESET_PERIPHS_SAR_ADC	83
+#define RESET_PERIPHS_I2C_MASTER_0	84
+#define RESET_SANA		85
+/*				86	*/
+#define RESET_PERIPHS_STREAM_INTERFACE	87
+#define RESET_PERIPHS_SDIO	88
+#define RESET_PERIPHS_UART_0	89
+#define RESET_PERIPHS_UART_1_2	90
+#define RESET_PERIPHS_ASYNC_0	91
+#define RESET_PERIPHS_ASYNC_1	92
+#define RESET_PERIPHS_SPI_0	93
+#define RESET_PERIPHS_SDHC	94
+#define RESET_UART_SLIP		95
+#define RESET_USB_DDR_0		96
+#define RESET_USB_DDR_1		97
+#define RESET_USB_DDR_2		98
+#define RESET_USB_DDR_3		99
+/*				100	*/
+#define RESET_DEVICE_MMC_ARB	101
+/*				102	*/
+#define RESET_VID_LOCK		103
+#define RESET_A9_DMC_PIPEL	104
+/*				105	*/
+/*				106	*/
+/*				107	*/
+/*				108	*/
+/*				109	*/
+/*				110	*/
+/*				111	*/
+
+#endif