diff mbox

[v3,1/4] firmware: Amlogic: Add secure monitor driver

Message ID 1464021024-29380-2-git-send-email-carlo@caione.org (mailing list archive)
State New, archived
Headers show

Commit Message

Carlo Caione May 23, 2016, 4:30 p.m. UTC
From: Carlo Caione <carlo@endlessm.com>

Introduce a driver to provide calls into secure monitor mode.

In the Amlogic SoCs these calls are used for multiple reasons: access to
NVMEM, set USB boot, enable JTAG, etc...

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 drivers/firmware/Kconfig                |   1 +
 drivers/firmware/Makefile               |   1 +
 drivers/firmware/meson/Kconfig          |   8 ++
 drivers/firmware/meson/Makefile         |   1 +
 drivers/firmware/meson/meson_sm.c       | 179 ++++++++++++++++++++++++++++++++
 include/linux/firmware/meson/meson_sm.h |  38 +++++++
 6 files changed, 228 insertions(+)
 create mode 100644 drivers/firmware/meson/Kconfig
 create mode 100644 drivers/firmware/meson/Makefile
 create mode 100644 drivers/firmware/meson/meson_sm.c
 create mode 100644 include/linux/firmware/meson/meson_sm.h

Comments

Kevin Hilman May 23, 2016, 8:58 p.m. UTC | #1
Carlo Caione <carlo@caione.org> writes:

> From: Carlo Caione <carlo@endlessm.com>
>
> Introduce a driver to provide calls into secure monitor mode.
>
> In the Amlogic SoCs these calls are used for multiple reasons: access to
> NVMEM, set USB boot, enable JTAG, etc...
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>

[...]

> +static int meson_sm_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct meson_sm_firmware *fw;
> +	u32 sm_phy_in_base, sm_phy_out_base;
> +	int cmd_in, cmd_out;
> +
> +	fw = devm_kzalloc(&pdev->dev, sizeof(*fw), GFP_KERNEL);
> +	if (!fw)
> +		return -ENOMEM;
> +
> +	fw->dev = &pdev->dev;
> +
> +	if (of_property_read_u32(np, "amlogic,sm-cmd-input-base", &cmd_in))
> +		return -EINVAL;
> +
> +	if (of_property_read_u32(np, "amlogic,sm-cmd-output-base", &cmd_out))
> +		return -EINVAL;
> +
> +	sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);

Should there be any error checking here?  Do we have any info on the
return values here in case of error, or in case of missing firmware,
etc.

Kevin
Carlo Caione May 24, 2016, 8:08 a.m. UTC | #2
On 23/05/16 13:58, Kevin Hilman wrote:

[...]
> > +	if (of_property_read_u32(np, "amlogic,sm-cmd-input-base", &cmd_in))
> > +		return -EINVAL;
> > +
> > +	if (of_property_read_u32(np, "amlogic,sm-cmd-output-base", &cmd_out))
> > +		return -EINVAL;
> > +
> > +	sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);
> 
> Should there be any error checking here?  Do we have any info on the
> return values here in case of error, or in case of missing firmware,
> etc.

We do not have any info on that but I can assume 0 is considered an
error as for other SMC calls. Fix in v4.
diff mbox

Patch

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6664f11..686e395 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -199,5 +199,6 @@  config HAVE_ARM_SMCCC
 source "drivers/firmware/broadcom/Kconfig"
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"
+source "drivers/firmware/meson/Kconfig"
 
 endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 474bada..fc4bb09 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -21,6 +21,7 @@  obj-$(CONFIG_QCOM_SCM_32)	+= qcom_scm-32.o
 CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
 
 obj-y				+= broadcom/
+obj-y				+= meson/
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/
 obj-$(CONFIG_UEFI_CPER)		+= efi/
diff --git a/drivers/firmware/meson/Kconfig b/drivers/firmware/meson/Kconfig
new file mode 100644
index 0000000..fff11a3
--- /dev/null
+++ b/drivers/firmware/meson/Kconfig
@@ -0,0 +1,8 @@ 
+#
+# Amlogic Secure Monitor driver
+#
+config MESON_SM
+	bool
+	default ARCH_MESON
+	help
+	  Say y here to enable the Amlogic secure monitor driver
diff --git a/drivers/firmware/meson/Makefile b/drivers/firmware/meson/Makefile
new file mode 100644
index 0000000..9ab3884
--- /dev/null
+++ b/drivers/firmware/meson/Makefile
@@ -0,0 +1 @@ 
+obj-$(CONFIG_MESON_SM) +=	meson_sm.o
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
new file mode 100644
index 0000000..445bc7f
--- /dev/null
+++ b/drivers/firmware/meson/meson_sm.c
@@ -0,0 +1,179 @@ 
+/*
+ * Amlogic Secure Monitor driver
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdarg.h>
+#include <asm/cacheflush.h>
+#include <asm/compiler.h>
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+#define SM_MEM_SIZE	0x1000
+
+struct meson_sm_data {
+	u32 cmd;
+	u32 arg0;
+	u32 arg1;
+	u32 arg2;
+	u32 arg3;
+	u32 arg4;
+	u32 ret;
+};
+
+static void __meson_sm_call(void *info)
+{
+	struct meson_sm_data *data = info;
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(data->cmd,
+		      data->arg0, data->arg1, data->arg2,
+		      data->arg3, data->arg4, 0, 0, &res);
+	data->ret = res.a0;
+}
+
+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+		  u32 arg3, u32 arg4)
+{
+	struct meson_sm_data data;
+
+	data.cmd = cmd;
+	data.arg0 = arg0;
+	data.arg1 = arg1;
+	data.arg2 = arg2;
+	data.arg3 = arg3;
+	data.arg4 = arg4;
+	data.ret = 0;
+
+	__meson_sm_call(&data);
+
+	return data.ret;
+}
+EXPORT_SYMBOL(meson_sm_call);
+
+u32 meson_sm_call_read(struct meson_sm_firmware *fw, void *buffer,
+		       u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+		       u32 arg3, u32 arg4)
+{
+	u32 size;
+
+	if (!fw)
+		return -EINVAL;
+
+	size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+	if (!size || size > SM_MEM_SIZE)
+		return -EINVAL;
+
+	memcpy(buffer, fw->sm_sharemem_out_base, size);
+	return size;
+}
+EXPORT_SYMBOL(meson_sm_call_read);
+
+u32 meson_sm_call_write(struct meson_sm_firmware *fw, void *buffer,
+			unsigned int b_size, u32 cmd, u32 arg0,
+			u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 size;
+
+	if (!fw)
+		return -EINVAL;
+
+	if (b_size > SM_MEM_SIZE)
+		return -EINVAL;
+
+	memcpy(fw->sm_sharemem_in_base, buffer, b_size);
+
+	size = meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+	if (!size)
+		return -EINVAL;
+
+	return size;
+}
+EXPORT_SYMBOL(meson_sm_call_write);
+
+static int meson_sm_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct meson_sm_firmware *fw;
+	u32 sm_phy_in_base, sm_phy_out_base;
+	int cmd_in, cmd_out;
+
+	fw = devm_kzalloc(&pdev->dev, sizeof(*fw), GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
+
+	fw->dev = &pdev->dev;
+
+	if (of_property_read_u32(np, "amlogic,sm-cmd-input-base", &cmd_in))
+		return -EINVAL;
+
+	if (of_property_read_u32(np, "amlogic,sm-cmd-output-base", &cmd_out))
+		return -EINVAL;
+
+	sm_phy_in_base = meson_sm_call(cmd_in, 0, 0, 0, 0, 0);
+	fw->sm_sharemem_in_base = ioremap_cache(sm_phy_in_base, SM_MEM_SIZE);
+	if (!fw->sm_sharemem_in_base)
+		return -EINVAL;
+
+	sm_phy_out_base = meson_sm_call(cmd_out, 0, 0, 0, 0, 0);
+	fw->sm_sharemem_out_base = ioremap_cache(sm_phy_out_base, SM_MEM_SIZE);
+	if (!fw->sm_sharemem_out_base) {
+		iounmap(fw->sm_sharemem_in_base);
+		return -EINVAL;
+	}
+
+	platform_set_drvdata(pdev, fw);
+
+	return 0;
+}
+
+struct meson_sm_firmware *meson_sm_get_fw(struct device_node *firmware_node)
+{
+	struct platform_device *pdev = of_find_device_by_node(firmware_node);
+
+	/*
+	 * Returns NULL is the firmware device is not ready.
+	 */
+	if (!pdev)
+		return NULL;
+
+	return platform_get_drvdata(pdev);
+}
+EXPORT_SYMBOL(meson_sm_get_fw);
+
+static const struct of_device_id meson_sm_ids[] = {
+	{ .compatible = "amlogic,meson-sm" },
+	{ /* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, meson_sm_ids);
+
+static struct platform_driver meson_sm_platform_driver = {
+	.probe	= meson_sm_probe,
+	.driver	= {
+		.name		= "secmon",
+		.of_match_table	= meson_sm_ids,
+	},
+};
+module_platform_driver(meson_sm_platform_driver);
+
+MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
+MODULE_DESCRIPTION("Amlogic secure monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
new file mode 100644
index 0000000..7b6b524
--- /dev/null
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -0,0 +1,38 @@ 
+/*
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _MESON_SM_H_
+#define _MESON_SM_H_
+
+#include <linux/types.h>
+#include <linux/of_device.h>
+
+struct meson_sm_firmware {
+	struct device *dev;
+	void __iomem *sm_sharemem_in_base;
+	void __iomem *sm_sharemem_out_base;
+};
+
+u32 meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+		  u32 arg3, u32 arg4);
+
+u32 meson_sm_call_write(struct meson_sm_firmware *fw, void *buffer,
+			unsigned int b_size, u32 cmd, u32 arg0,
+			u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+
+u32 meson_sm_call_read(struct meson_sm_firmware *fw, void *buffer,
+		       u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+		       u32 arg3, u32 arg4);
+
+struct meson_sm_firmware *meson_sm_get_fw(struct device_node *firmware_node);
+
+#endif /* _MESON_SM_H_ */