| Message ID | 1464626385-19253-6-git-send-email-peter.senna@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, May 30, 2016 at 1:39 PM, Peter Senna Tschudin <peter.senna@collabora.com> wrote: > +&mux2_i2c2 { > + status = "okay"; > + clock-frequency = <100000>; > + > + b850v3_lvds_dp_bridge { > + compatible = "ge,b850v3_lvds_dp"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg = <0x73>; You use 'reg = <0x73>' here, but no @73.
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 88a70de..d366384 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -77,6 +77,13 @@ fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "okay"; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&b850v3_lvds_dp_bridge_in>; + }; + }; }; }; @@ -147,3 +154,27 @@ reg = <0x4a>; }; }; + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + b850v3_lvds_dp_bridge { + compatible = "ge,b850v3_lvds_dp"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + edid-reg = <0x72>; + + port@0 { + reg = <0>; + b850v3_lvds_dp_bridge_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +};
Configure the GE B850v3 to use the LVDS/DP++ bridge. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> --- arch/arm/boot/dts/imx6q-b850v3.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)