| Message ID | 1464693584-22343-2-git-send-email-tn@semihalf.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 31 May 2016 13:19:38 +0200 Tomasz Nowicki <tn@semihalf.com> wrote: > IORT shows representation of IO topology for ARM based systems. > It describes how various components are connected together on > parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. > > Initial support allows to: > - register ITS MSI chip along with ITS translation ID and domain token > - deregister ITS MSI chip based on ITS translation ID > - find registered domain token based on ITS translation ID > - map MSI RID based on PCI device and requester ID > - find domain token based on PCI device and requester ID > > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > --- > drivers/acpi/Kconfig | 3 + > drivers/acpi/Makefile | 1 + > drivers/acpi/iort.c | 344 ++++++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/iort.h | 38 ++++++ > 4 files changed, 386 insertions(+) > create mode 100644 drivers/acpi/iort.c > create mode 100644 include/linux/iort.h > > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index b7e2e77..848471f 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -57,6 +57,9 @@ config ACPI_SYSTEM_POWER_STATES_SUPPORT > config ACPI_CCA_REQUIRED > bool > > +config IORT_TABLE > + bool > + > config ACPI_DEBUGGER > bool "AML debugger interface" > select ACPI_DEBUG > diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile > index 251ce85..c7c9b29 100644 > --- a/drivers/acpi/Makefile > +++ b/drivers/acpi/Makefile > @@ -82,6 +82,7 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o > obj-$(CONFIG_ACPI_BGRT) += bgrt.o > obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o > obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o > +obj-$(CONFIG_IORT_TABLE) += iort.o > > # processor has its own "processor." module_param namespace > processor-y := processor_driver.o > diff --git a/drivers/acpi/iort.c b/drivers/acpi/iort.c > new file mode 100644 > index 0000000..226eb6d > --- /dev/null > +++ b/drivers/acpi/iort.c > @@ -0,0 +1,344 @@ > +/* > + * Copyright (C) 2016, Semihalf > + * Author: Tomasz Nowicki <tn@semihalf.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * This file implements early detection/parsing of I/O mapping > + * reported to OS through firmware via I/O Remapping Table (IORT) > + * IORT document number: ARM DEN 0049A > + */ > + > +#define pr_fmt(fmt) "ACPI: IORT: " fmt > + > +#include <linux/export.h> > +#include <linux/iort.h> > +#include <linux/irqdomain.h> > +#include <linux/kernel.h> > +#include <linux/pci.h> > + > +struct iort_its_msi_chip { > + struct list_head list; > + struct fwnode_handle *fw_node; > + u32 translation_id; > +}; > + > +typedef acpi_status (*iort_find_node_callback) > + (struct acpi_iort_node *node, void *context); > + > +/* Root pointer to the mapped IORT table */ > +static struct acpi_table_header *iort_table; > + > +static LIST_HEAD(iort_msi_chip_list); > + > +/** > + * iort_register_domain_token() - register domain token and related ITS ID > + * to the list from where we can get it back > + * later on. > + * @translation_id: ITS ID > + * @token: domain token > + * > + * Returns: 0 on success, -ENOMEM if not memory when allocating list element. > + */ > +int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node) > +{ > + struct iort_its_msi_chip *its_msi_chip; > + > + its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL); > + if (!its_msi_chip) > + return -ENOMEM; > + > + its_msi_chip->fw_node = fw_node; > + its_msi_chip->translation_id = trans_id; > + > + list_add(&its_msi_chip->list, &iort_msi_chip_list); No locking? How do you handle concurrent accesses? > + return 0; > +} > + > +/** > + * iort_unregister_domain_token() - unregister domain token based on ITS ID. > + * @translation_id: ITS ID > + * > + * Returns: none. > + */ > +void iort_deregister_domain_token(int trans_id) > +{ > + struct iort_its_msi_chip *its_msi_chip, *t; > + > + list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) { > + if (its_msi_chip->translation_id == trans_id) { > + list_del(&its_msi_chip->list); > + kfree(its_msi_chip); > + break; > + } > + } > +} Same here. > + > +/** > + * iort_find_its_domain_token() - find domain token based on given ITS ID. > + * @translation_id: ITS ID > + * > + * Returns: domain token when find on the list, NULL otherwise. > + */ > +struct fwnode_handle *iort_its_find_domain_token(int trans_id) > +{ > + struct iort_its_msi_chip *its_msi_chip; > + > + list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { > + if (its_msi_chip->translation_id == trans_id) > + return its_msi_chip->fw_node; > + } > + > + return NULL; > +} Same here. > + > +static struct acpi_iort_node * > +iort_scan_node(enum acpi_iort_node_type type, > + iort_find_node_callback callback, void *context) > +{ > + struct acpi_iort_node *iort_node, *iort_end; > + struct acpi_table_iort *iort; > + int i; > + > + if (!iort_table) > + return NULL; > + > + /* > + * iort_table and iort both point to the start of IORT table, but > + * have different struct types > + */ > + iort = (struct acpi_table_iort *)iort_table; > + > + /* Get the first IORT node */ > + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, > + iort->node_offset); > + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, > + iort_table->length); > + > + for (i = 0; i < iort->node_count; i++) { > + if (iort_node >= iort_end) { > + pr_err("iort node pointer overflows, bad table\n"); This probably deserves a WARN_ON, a TAINT_FIRMWARE_WORKAROUND and maybe a TAINT_CRAP as an added injury. > + return NULL; > + } > + > + if (iort_node->type == type) { > + if (ACPI_SUCCESS(callback(iort_node, context))) > + return iort_node; > + } > + > + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, > + iort_node->length); > + } > + > + return NULL; > +} > + > +static acpi_status > +iort_find_dev_callback(struct acpi_iort_node *node, void *context) This is actually trying to match a node to a given device. How about calling it iort_match_node_callback? > +{ > + struct acpi_iort_root_complex *pci_rc; > + struct device *dev = context; > + struct pci_bus *bus; > + > + switch (node->type) { > + case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: > + bus = to_pci_bus(dev); > + pci_rc = (struct acpi_iort_root_complex *)node->node_data; > + > + /* > + * It is assumed that PCI segment numbers maps one-to-one > + * with root complexes. Each segment number can represent only > + * one root complex. > + */ > + if (pci_rc->pci_segment_number == pci_domain_nr(bus)) > + return AE_OK; > + > + break; > + } > + > + return AE_NOT_FOUND; > +} > + > +static struct acpi_iort_node * > +iort_dev_map_rid(struct acpi_iort_node *node, u32 rid_in, > + u32 *rid_out) Given that there is no "dev" involved in this functions, but only nodes, consider renaming this to iort_node_map_rid. > +{ > + > + if (!node) > + goto out; > + > + /* Go upstream */ > + while (node->type != ACPI_IORT_NODE_ITS_GROUP) { > + struct acpi_iort_id_mapping *id; > + int i, found = 0; > + > + /* Exit when no mapping array */ > + if (!node->mapping_offset || !node->mapping_count) > + return NULL; > + > + id = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, > + node->mapping_offset); > + > + for (i = 0, found = 0; i < node->mapping_count; i++, id++) { > + /* > + * Single mapping is not translation rule, > + * lets move on for this case > + */ > + if (id->flags & ACPI_IORT_ID_SINGLE_MAPPING) { > + if (node->type != ACPI_IORT_NODE_SMMU) { > + rid_in = id->output_base; > + found = 1; > + break; > + } > + > + pr_warn(FW_BUG "[node %p type %d] SINGLE MAPPING flag not allowed for SMMU node, skipping ID map\n", > + node, node->type); > + continue; > + } > + > + if (rid_in < id->input_base || > + (rid_in > id->input_base + id->id_count)) > + continue; > + > + rid_in = id->output_base + (rid_in - id->input_base); > + found = 1; > + break; > + } > + > + if (!found) > + return NULL; > + > + /* Firmware bug! */ > + if (!id->output_reference) { > + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", > + node, node->type); > + return NULL; > + } > + > + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, > + id->output_reference); > + } Do we always want to resolve an ID from the device down to the last possible transformation? While this works fine for the ITS (which is supposed to be the last user of the RID), this may not work that well for intermediate remapping elements (IOMMU, for example). So I'm wondering if what we actually want is something that would say iort_node_map_rid(from_node, to_node, rid_in, &rid_out)? > + > +out: > + if (rid_out) > + *rid_out = rid_in; > + return node; > +} > + > +static struct acpi_iort_node * > +iort_its_find_node_and_map_rid(struct pci_dev *pdev, u32 req_id, u32 *dev_id) Does this only applies to a PCI device? > +{ > + struct pci_bus *pbus = pdev->bus; > + struct acpi_iort_node *node; > + > + /* Find a PCI root bus */ > + while (!pci_is_root_bus(pbus)) > + pbus = pbus->parent; > + > + > + node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, > + iort_find_dev_callback, &pbus->dev); > + if (!node) { > + dev_err(&pdev->dev, "can't find related IORT node\n"); > + return NULL; > + } > + > + return iort_dev_map_rid(node, req_id, dev_id); > +} > + > +/** > + * iort_pci_domain_get_msi_rid() - find MSI RID based on PCI device ID This doesn't match the name of the function. > + * @pdev: The PCI device > + * @req_id: The PCI device requester ID > + * > + * Returns: MSI RID on success, input requester ID otherwise > + */ > +u32 iort_pci_get_msi_rid(struct pci_dev *pdev, u32 req_id) > +{ > + u32 dev_id; > + > + if (!iort_its_find_node_and_map_rid(pdev, req_id, &dev_id)) > + return req_id; > + > + return dev_id; > +} > + > +/** > + * iort_pci_find_its_id() - find the ITS identifier based on specified device. > + * @pdev: The PCI device > + * @idx: Index of the ITS identifier list > + * @its_id: ITS identifier > + * > + * Returns: 0 on success, appropriate error value otherwise > + */ > +static int > +iort_pci_find_its_id(struct pci_dev *pdev, u32 req_id, unsigned int idx, > + int *its_id) > +{ > + struct acpi_iort_its_group *its; > + struct acpi_iort_node *node; > + > + node = iort_its_find_node_and_map_rid(pdev, req_id, NULL); > + if (!node) > + return -ENXIO; > + > + /* Move to ITS specific data */ > + its = (struct acpi_iort_its_group *)node->node_data; > + if (idx > its->its_count) { > + dev_err(&pdev->dev, "requested ITS ID index [%d] is greater than available[%d]\n", > + idx, its->its_count); > + return -ENXIO; > + } > + > + *its_id = its->identifiers[idx]; > + return 0; > +} > + > +/** > + * iort_pci_get_msi_domain_handle() - find registered domain token related to > + * PCI device Broken comment. > + * @pdev: The PCI device > + * @req_id: The PCI device requester ID > + * > + * Returns: the MSI domain for this device, NULL otherwise > + */ > +struct irq_domain * > +iort_pci_get_domain(struct pci_dev *pdev, u32 req_id) Again: does this have to be PCI specific? > +{ > + static struct fwnode_handle *handle; > + int its_id; > + > + if (iort_pci_find_its_id(pdev, req_id, 0, &its_id)) > + return NULL; > + > + handle = iort_its_find_domain_token(its_id); > + if (!handle) > + return NULL; > + > + return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI); > +} > + > +static int __init iort_table_detect(void) > +{ > + acpi_status status; > + > + if (acpi_disabled) > + return -ENODEV; > + > + status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); > + if (ACPI_FAILURE(status)) { > + const char *msg = acpi_format_exception(status); > + pr_err("Failed to get table, %s\n", msg); > + return -EINVAL; > + } > + > + return 0; > +} > +arch_initcall(iort_table_detect); > diff --git a/include/linux/iort.h b/include/linux/iort.h > new file mode 100644 > index 0000000..490ff4d > --- /dev/null > +++ b/include/linux/iort.h > @@ -0,0 +1,38 @@ > +/* > + * Copyright (C) 2016, Semihalf > + * Author: Tomasz Nowicki <tn@semihalf.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple > + * Place - Suite 330, Boston, MA 02111-1307 USA. > + */ > + > +#ifndef __IORT_H__ > +#define __IORT_H__ > + > +#include <linux/acpi.h> > + > +struct fwnode_handle; > +int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node); > +void iort_deregister_domain_token(int trans_id); > +struct fwnode_handle *iort_its_find_domain_token(int trans_id); > +#ifdef CONFIG_IORT_TABLE > +u32 iort_pci_get_msi_rid(struct pci_dev *pdev, u32 req_id); > +struct irq_domain *iort_pci_get_domain(struct pci_dev *pdev, u32 req_id); > +#else > +static inline u32 iort_pci_get_msi_rid(struct pci_dev *pdev, u32 req_id) > +{ return req_id; } > +static inline struct irq_domain * > +iort_pci_get_domain(struct pci_dev *pdev, u32 req_id) { return NULL; } > +#endif > + > +#endif /* __IORT_H__ */ Thanks, M.
On 04.06.2016 13:15, Marc Zyngier wrote: > On Tue, 31 May 2016 13:19:38 +0200 > Tomasz Nowicki <tn@semihalf.com> wrote: > >> IORT shows representation of IO topology for ARM based systems. >> It describes how various components are connected together on >> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. >> >> Initial support allows to: >> - register ITS MSI chip along with ITS translation ID and domain token >> - deregister ITS MSI chip based on ITS translation ID >> - find registered domain token based on ITS translation ID >> - map MSI RID based on PCI device and requester ID >> - find domain token based on PCI device and requester ID >> >> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> >> --- >> drivers/acpi/Kconfig | 3 + >> drivers/acpi/Makefile | 1 + >> drivers/acpi/iort.c | 344 ++++++++++++++++++++++++++++++++++++++++++++++++++ >> include/linux/iort.h | 38 ++++++ >> 4 files changed, 386 insertions(+) >> create mode 100644 drivers/acpi/iort.c >> create mode 100644 include/linux/iort.h >> >> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >> index b7e2e77..848471f 100644 >> --- a/drivers/acpi/Kconfig >> +++ b/drivers/acpi/Kconfig >> @@ -57,6 +57,9 @@ config ACPI_SYSTEM_POWER_STATES_SUPPORT >> config ACPI_CCA_REQUIRED >> bool >> >> +config IORT_TABLE >> + bool >> + >> config ACPI_DEBUGGER >> bool "AML debugger interface" >> select ACPI_DEBUG >> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile >> index 251ce85..c7c9b29 100644 >> --- a/drivers/acpi/Makefile >> +++ b/drivers/acpi/Makefile >> @@ -82,6 +82,7 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o >> obj-$(CONFIG_ACPI_BGRT) += bgrt.o >> obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o >> obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o >> +obj-$(CONFIG_IORT_TABLE) += iort.o >> >> # processor has its own "processor." module_param namespace >> processor-y := processor_driver.o >> diff --git a/drivers/acpi/iort.c b/drivers/acpi/iort.c >> new file mode 100644 >> index 0000000..226eb6d >> --- /dev/null >> +++ b/drivers/acpi/iort.c >> @@ -0,0 +1,344 @@ >> +/* >> + * Copyright (C) 2016, Semihalf >> + * Author: Tomasz Nowicki <tn@semihalf.com> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >> + * more details. >> + * >> + * This file implements early detection/parsing of I/O mapping >> + * reported to OS through firmware via I/O Remapping Table (IORT) >> + * IORT document number: ARM DEN 0049A >> + */ >> + >> +#define pr_fmt(fmt) "ACPI: IORT: " fmt >> + >> +#include <linux/export.h> >> +#include <linux/iort.h> >> +#include <linux/irqdomain.h> >> +#include <linux/kernel.h> >> +#include <linux/pci.h> >> + >> +struct iort_its_msi_chip { >> + struct list_head list; >> + struct fwnode_handle *fw_node; >> + u32 translation_id; >> +}; >> + >> +typedef acpi_status (*iort_find_node_callback) >> + (struct acpi_iort_node *node, void *context); >> + >> +/* Root pointer to the mapped IORT table */ >> +static struct acpi_table_header *iort_table; >> + >> +static LIST_HEAD(iort_msi_chip_list); >> + >> +/** >> + * iort_register_domain_token() - register domain token and related ITS ID >> + * to the list from where we can get it back >> + * later on. >> + * @translation_id: ITS ID >> + * @token: domain token >> + * >> + * Returns: 0 on success, -ENOMEM if not memory when allocating list element. >> + */ >> +int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node) >> +{ >> + struct iort_its_msi_chip *its_msi_chip; >> + >> + its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL); >> + if (!its_msi_chip) >> + return -ENOMEM; >> + >> + its_msi_chip->fw_node = fw_node; >> + its_msi_chip->translation_id = trans_id; >> + >> + list_add(&its_msi_chip->list, &iort_msi_chip_list); > > No locking? How do you handle concurrent accesses? I wandered if we need locking here but at the end I did not find worst-case scenario. 1. Adding elements to list is done in first place here (later on list is not modified): start_kernel -> init_IRQ -> [...] - > gic_acpi_parse_madt_its -> iort_register_domain_token 2. Then we only retrieving elements form list: start_kernel -> rest_init -> kernel_init -> [...] -> do_initcalls -> its_pci_msi_init -> its_pci_acpi_msi_init -> iort_its_find_domain_token pci_set_msi_domain -> iort_get_device_domain -> iort_its_find_domain_token Do you mean some specific case? > >> + return 0; >> +} >> + >> +/** >> + * iort_unregister_domain_token() - unregister domain token based on ITS ID. >> + * @translation_id: ITS ID >> + * >> + * Returns: none. >> + */ >> +void iort_deregister_domain_token(int trans_id) >> +{ >> + struct iort_its_msi_chip *its_msi_chip, *t; >> + >> + list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) { >> + if (its_msi_chip->translation_id == trans_id) { >> + list_del(&its_msi_chip->list); >> + kfree(its_msi_chip); >> + break; >> + } >> + } >> +} > > Same here. > >> + >> +/** >> + * iort_find_its_domain_token() - find domain token based on given ITS ID. >> + * @translation_id: ITS ID >> + * >> + * Returns: domain token when find on the list, NULL otherwise. >> + */ >> +struct fwnode_handle *iort_its_find_domain_token(int trans_id) >> +{ >> + struct iort_its_msi_chip *its_msi_chip; >> + >> + list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { >> + if (its_msi_chip->translation_id == trans_id) >> + return its_msi_chip->fw_node; >> + } >> + >> + return NULL; >> +} > > Same here. > >> + >> +static struct acpi_iort_node * >> +iort_scan_node(enum acpi_iort_node_type type, >> + iort_find_node_callback callback, void *context) >> +{ >> + struct acpi_iort_node *iort_node, *iort_end; >> + struct acpi_table_iort *iort; >> + int i; >> + >> + if (!iort_table) >> + return NULL; >> + >> + /* >> + * iort_table and iort both point to the start of IORT table, but >> + * have different struct types >> + */ >> + iort = (struct acpi_table_iort *)iort_table; >> + >> + /* Get the first IORT node */ >> + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, >> + iort->node_offset); >> + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, >> + iort_table->length); >> + >> + for (i = 0; i < iort->node_count; i++) { >> + if (iort_node >= iort_end) { >> + pr_err("iort node pointer overflows, bad table\n"); > > This probably deserves a WARN_ON, a TAINT_FIRMWARE_WORKAROUND and maybe > a TAINT_CRAP as an added injury. I think we can use similar solution as in dmar.c if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND, "IORT node pointer overflows, bad table\n")) return NULL; > >> + return NULL; >> + } >> + >> + if (iort_node->type == type) { >> + if (ACPI_SUCCESS(callback(iort_node, context))) >> + return iort_node; >> + } >> + >> + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, >> + iort_node->length); >> + } >> + >> + return NULL; >> +} >> + >> +static acpi_status >> +iort_find_dev_callback(struct acpi_iort_node *node, void *context) > > This is actually trying to match a node to a given device. How about > calling it iort_match_node_callback? Yeah, sounds good to me. > >> +{ >> + struct acpi_iort_root_complex *pci_rc; >> + struct device *dev = context; >> + struct pci_bus *bus; >> + >> + switch (node->type) { >> + case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: >> + bus = to_pci_bus(dev); >> + pci_rc = (struct acpi_iort_root_complex *)node->node_data; >> + >> + /* >> + * It is assumed that PCI segment numbers maps one-to-one >> + * with root complexes. Each segment number can represent only >> + * one root complex. >> + */ >> + if (pci_rc->pci_segment_number == pci_domain_nr(bus)) >> + return AE_OK; >> + >> + break; >> + } >> + >> + return AE_NOT_FOUND; >> +} >> + >> +static struct acpi_iort_node * >> +iort_dev_map_rid(struct acpi_iort_node *node, u32 rid_in, >> + u32 *rid_out) > > Given that there is no "dev" involved in this functions, but only > nodes, consider renaming this to iort_node_map_rid. +1 > >> +{ >> + >> + if (!node) >> + goto out; >> + >> + /* Go upstream */ >> + while (node->type != ACPI_IORT_NODE_ITS_GROUP) { >> + struct acpi_iort_id_mapping *id; >> + int i, found = 0; >> + >> + /* Exit when no mapping array */ >> + if (!node->mapping_offset || !node->mapping_count) >> + return NULL; >> + >> + id = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, >> + node->mapping_offset); >> + >> + for (i = 0, found = 0; i < node->mapping_count; i++, id++) { >> + /* >> + * Single mapping is not translation rule, >> + * lets move on for this case >> + */ >> + if (id->flags & ACPI_IORT_ID_SINGLE_MAPPING) { >> + if (node->type != ACPI_IORT_NODE_SMMU) { >> + rid_in = id->output_base; >> + found = 1; >> + break; >> + } >> + >> + pr_warn(FW_BUG "[node %p type %d] SINGLE MAPPING flag not allowed for SMMU node, skipping ID map\n", >> + node, node->type); >> + continue; >> + } >> + >> + if (rid_in < id->input_base || >> + (rid_in > id->input_base + id->id_count)) >> + continue; >> + >> + rid_in = id->output_base + (rid_in - id->input_base); >> + found = 1; >> + break; >> + } >> + >> + if (!found) >> + return NULL; >> + >> + /* Firmware bug! */ >> + if (!id->output_reference) { >> + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", >> + node, node->type); >> + return NULL; >> + } >> + >> + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, >> + id->output_reference); >> + } > > Do we always want to resolve an ID from the device down to the last > possible transformation? While this works fine for the ITS (which is > supposed to be the last user of the RID), this may not work that well > for intermediate remapping elements (IOMMU, for example). > > So I'm wondering if what we actually want is something that would say > iort_node_map_rid(from_node, to_node, rid_in, &rid_out)? Good point. Actually Lorenzo improved that function in his SMMU ACPI series addressing your comment. So we can make it more generic from day one. > >> + >> +out: >> + if (rid_out) >> + *rid_out = rid_in; >> + return node; >> +} >> + >> +static struct acpi_iort_node * >> +iort_its_find_node_and_map_rid(struct pci_dev *pdev, u32 req_id, u32 *dev_id) > > Does this only applies to a PCI device? No, it does not. I will use struct device instead. > >> +{ >> + struct pci_bus *pbus = pdev->bus; >> + struct acpi_iort_node *node; >> + >> + /* Find a PCI root bus */ >> + while (!pci_is_root_bus(pbus)) >> + pbus = pbus->parent; >> + >> + >> + node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, >> + iort_find_dev_callback, &pbus->dev); >> + if (!node) { >> + dev_err(&pdev->dev, "can't find related IORT node\n"); >> + return NULL; >> + } >> + >> + return iort_dev_map_rid(node, req_id, dev_id); >> +} >> + >> +/** >> + * iort_pci_domain_get_msi_rid() - find MSI RID based on PCI device ID > > This doesn't match the name of the function. > >> + * @pdev: The PCI device >> + * @req_id: The PCI device requester ID >> + * >> + * Returns: MSI RID on success, input requester ID otherwise >> + */ >> +u32 iort_pci_get_msi_rid(struct pci_dev *pdev, u32 req_id) >> +{ >> + u32 dev_id; >> + >> + if (!iort_its_find_node_and_map_rid(pdev, req_id, &dev_id)) >> + return req_id; >> + >> + return dev_id; >> +} >> + >> +/** >> + * iort_pci_find_its_id() - find the ITS identifier based on specified device. >> + * @pdev: The PCI device >> + * @idx: Index of the ITS identifier list >> + * @its_id: ITS identifier >> + * >> + * Returns: 0 on success, appropriate error value otherwise >> + */ >> +static int >> +iort_pci_find_its_id(struct pci_dev *pdev, u32 req_id, unsigned int idx, >> + int *its_id) >> +{ >> + struct acpi_iort_its_group *its; >> + struct acpi_iort_node *node; >> + >> + node = iort_its_find_node_and_map_rid(pdev, req_id, NULL); >> + if (!node) >> + return -ENXIO; >> + >> + /* Move to ITS specific data */ >> + its = (struct acpi_iort_its_group *)node->node_data; >> + if (idx > its->its_count) { >> + dev_err(&pdev->dev, "requested ITS ID index [%d] is greater than available[%d]\n", >> + idx, its->its_count); >> + return -ENXIO; >> + } >> + >> + *its_id = its->identifiers[idx]; >> + return 0; >> +} >> + >> +/** >> + * iort_pci_get_msi_domain_handle() - find registered domain token related to >> + * PCI device > > Broken comment. Will fix. > >> + * @pdev: The PCI device >> + * @req_id: The PCI device requester ID >> + * >> + * Returns: the MSI domain for this device, NULL otherwise >> + */ >> +struct irq_domain * >> +iort_pci_get_domain(struct pci_dev *pdev, u32 req_id) > > Again: does this have to be PCI specific? Here struct device can be used as well. Thanks, Tomasz
On 07/06/16 15:34, Tomasz Nowicki wrote: > On 04.06.2016 13:15, Marc Zyngier wrote: >> On Tue, 31 May 2016 13:19:38 +0200 >> Tomasz Nowicki <tn@semihalf.com> wrote: >> >>> IORT shows representation of IO topology for ARM based systems. >>> It describes how various components are connected together on >>> parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. >>> >>> Initial support allows to: >>> - register ITS MSI chip along with ITS translation ID and domain token >>> - deregister ITS MSI chip based on ITS translation ID >>> - find registered domain token based on ITS translation ID >>> - map MSI RID based on PCI device and requester ID >>> - find domain token based on PCI device and requester ID >>> >>> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> >>> --- >>> drivers/acpi/Kconfig | 3 + >>> drivers/acpi/Makefile | 1 + >>> drivers/acpi/iort.c | 344 ++++++++++++++++++++++++++++++++++++++++++++++++++ >>> include/linux/iort.h | 38 ++++++ >>> 4 files changed, 386 insertions(+) >>> create mode 100644 drivers/acpi/iort.c >>> create mode 100644 include/linux/iort.h >>> >>> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig >>> index b7e2e77..848471f 100644 >>> --- a/drivers/acpi/Kconfig >>> +++ b/drivers/acpi/Kconfig >>> @@ -57,6 +57,9 @@ config ACPI_SYSTEM_POWER_STATES_SUPPORT >>> config ACPI_CCA_REQUIRED >>> bool >>> >>> +config IORT_TABLE >>> + bool >>> + >>> config ACPI_DEBUGGER >>> bool "AML debugger interface" >>> select ACPI_DEBUG >>> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile >>> index 251ce85..c7c9b29 100644 >>> --- a/drivers/acpi/Makefile >>> +++ b/drivers/acpi/Makefile >>> @@ -82,6 +82,7 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o >>> obj-$(CONFIG_ACPI_BGRT) += bgrt.o >>> obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o >>> obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o >>> +obj-$(CONFIG_IORT_TABLE) += iort.o >>> >>> # processor has its own "processor." module_param namespace >>> processor-y := processor_driver.o >>> diff --git a/drivers/acpi/iort.c b/drivers/acpi/iort.c >>> new file mode 100644 >>> index 0000000..226eb6d >>> --- /dev/null >>> +++ b/drivers/acpi/iort.c >>> @@ -0,0 +1,344 @@ >>> +/* >>> + * Copyright (C) 2016, Semihalf >>> + * Author: Tomasz Nowicki <tn@semihalf.com> >>> + * >>> + * This program is free software; you can redistribute it and/or modify it >>> + * under the terms and conditions of the GNU General Public License, >>> + * version 2, as published by the Free Software Foundation. >>> + * >>> + * This program is distributed in the hope it will be useful, but WITHOUT >>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for >>> + * more details. >>> + * >>> + * This file implements early detection/parsing of I/O mapping >>> + * reported to OS through firmware via I/O Remapping Table (IORT) >>> + * IORT document number: ARM DEN 0049A >>> + */ >>> + >>> +#define pr_fmt(fmt) "ACPI: IORT: " fmt >>> + >>> +#include <linux/export.h> >>> +#include <linux/iort.h> >>> +#include <linux/irqdomain.h> >>> +#include <linux/kernel.h> >>> +#include <linux/pci.h> >>> + >>> +struct iort_its_msi_chip { >>> + struct list_head list; >>> + struct fwnode_handle *fw_node; >>> + u32 translation_id; >>> +}; >>> + >>> +typedef acpi_status (*iort_find_node_callback) >>> + (struct acpi_iort_node *node, void *context); >>> + >>> +/* Root pointer to the mapped IORT table */ >>> +static struct acpi_table_header *iort_table; >>> + >>> +static LIST_HEAD(iort_msi_chip_list); >>> + >>> +/** >>> + * iort_register_domain_token() - register domain token and related ITS ID >>> + * to the list from where we can get it back >>> + * later on. >>> + * @translation_id: ITS ID >>> + * @token: domain token >>> + * >>> + * Returns: 0 on success, -ENOMEM if not memory when allocating list element. >>> + */ >>> +int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node) >>> +{ >>> + struct iort_its_msi_chip *its_msi_chip; >>> + >>> + its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL); >>> + if (!its_msi_chip) >>> + return -ENOMEM; >>> + >>> + its_msi_chip->fw_node = fw_node; >>> + its_msi_chip->translation_id = trans_id; >>> + >>> + list_add(&its_msi_chip->list, &iort_msi_chip_list); >> >> No locking? How do you handle concurrent accesses? > > I wandered if we need locking here but at the end I did not find > worst-case scenario. > > 1. Adding elements to list is done in first place here (later on list is > not modified): > start_kernel -> init_IRQ -> [...] - > gic_acpi_parse_madt_its -> > iort_register_domain_token > > 2. Then we only retrieving elements form list: > > start_kernel -> rest_init -> kernel_init -> [...] -> do_initcalls -> > its_pci_msi_init -> its_pci_acpi_msi_init -> iort_its_find_domain_token > > pci_set_msi_domain -> iort_get_device_domain -> iort_its_find_domain_token > > Do you mean some specific case? Not right now, but as a matter of principle, shared data structures should be protected (law of minimal surprise). And that will still work if someone comes up with a fancy hot-pluggable socket that has an ITS on it. [...] >>> +static struct acpi_iort_node * >>> +iort_dev_map_rid(struct acpi_iort_node *node, u32 rid_in, >>> + u32 *rid_out) >> >> Given that there is no "dev" involved in this functions, but only >> nodes, consider renaming this to iort_node_map_rid. > > +1 > >> >>> +{ >>> + >>> + if (!node) >>> + goto out; >>> + >>> + /* Go upstream */ >>> + while (node->type != ACPI_IORT_NODE_ITS_GROUP) { >>> + struct acpi_iort_id_mapping *id; >>> + int i, found = 0; >>> + >>> + /* Exit when no mapping array */ >>> + if (!node->mapping_offset || !node->mapping_count) >>> + return NULL; >>> + >>> + id = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, >>> + node->mapping_offset); >>> + >>> + for (i = 0, found = 0; i < node->mapping_count; i++, id++) { >>> + /* >>> + * Single mapping is not translation rule, >>> + * lets move on for this case >>> + */ >>> + if (id->flags & ACPI_IORT_ID_SINGLE_MAPPING) { >>> + if (node->type != ACPI_IORT_NODE_SMMU) { >>> + rid_in = id->output_base; >>> + found = 1; >>> + break; >>> + } >>> + >>> + pr_warn(FW_BUG "[node %p type %d] SINGLE MAPPING flag not allowed for SMMU node, skipping ID map\n", >>> + node, node->type); >>> + continue; >>> + } >>> + >>> + if (rid_in < id->input_base || >>> + (rid_in > id->input_base + id->id_count)) >>> + continue; >>> + >>> + rid_in = id->output_base + (rid_in - id->input_base); >>> + found = 1; >>> + break; >>> + } >>> + >>> + if (!found) >>> + return NULL; >>> + >>> + /* Firmware bug! */ >>> + if (!id->output_reference) { >>> + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", >>> + node, node->type); >>> + return NULL; >>> + } >>> + >>> + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, >>> + id->output_reference); >>> + } >> >> Do we always want to resolve an ID from the device down to the last >> possible transformation? While this works fine for the ITS (which is >> supposed to be the last user of the RID), this may not work that well >> for intermediate remapping elements (IOMMU, for example). >> >> So I'm wondering if what we actually want is something that would say >> iort_node_map_rid(from_node, to_node, rid_in, &rid_out)? > > Good point. Actually Lorenzo improved that function in his SMMU ACPI > series addressing your comment. So we can make it more generic from day one. Indeed. He also has a couple of fixes that you could directly include in the next drop. Thanks, M.
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index b7e2e77..848471f 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -57,6 +57,9 @@ config ACPI_SYSTEM_POWER_STATES_SUPPORT config ACPI_CCA_REQUIRED bool +config IORT_TABLE + bool + config ACPI_DEBUGGER bool "AML debugger interface" select ACPI_DEBUG diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 251ce85..c7c9b29 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -82,6 +82,7 @@ obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o obj-$(CONFIG_ACPI_BGRT) += bgrt.o obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o +obj-$(CONFIG_IORT_TABLE) += iort.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o diff --git a/drivers/acpi/iort.c b/drivers/acpi/iort.c new file mode 100644 index 0000000..226eb6d --- /dev/null +++ b/drivers/acpi/iort.c @@ -0,0 +1,344 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki <tn@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * This file implements early detection/parsing of I/O mapping + * reported to OS through firmware via I/O Remapping Table (IORT) + * IORT document number: ARM DEN 0049A + */ + +#define pr_fmt(fmt) "ACPI: IORT: " fmt + +#include <linux/export.h> +#include <linux/iort.h> +#include <linux/irqdomain.h> +#include <linux/kernel.h> +#include <linux/pci.h> + +struct iort_its_msi_chip { + struct list_head list; + struct fwnode_handle *fw_node; + u32 translation_id; +}; + +typedef acpi_status (*iort_find_node_callback) + (struct acpi_iort_node *node, void *context); + +/* Root pointer to the mapped IORT table */ +static struct acpi_table_header *iort_table; + +static LIST_HEAD(iort_msi_chip_list); + +/** + * iort_register_domain_token() - register domain token and related ITS ID + * to the list from where we can get it back + * later on. + * @translation_id: ITS ID + * @token: domain token + * + * Returns: 0 on success, -ENOMEM if not memory when allocating list element. + */ +int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node) +{ + struct iort_its_msi_chip *its_msi_chip; + + its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL); + if (!its_msi_chip) + return -ENOMEM; + + its_msi_chip->fw_node = fw_node; + its_msi_chip->translation_id = trans_id; + + list_add(&its_msi_chip->list, &iort_msi_chip_list); + return 0; +} + +/** + * iort_unregister_domain_token() - unregister domain token based on ITS ID. + * @translation_id: ITS ID + * + * Returns: none. + */ +void iort_deregister_domain_token(int trans_id) +{ + struct iort_its_msi_chip *its_msi_chip, *t; + + list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) { + if (its_msi_chip->translation_id == trans_id) { + list_del(&its_msi_chip->list); + kfree(its_msi_chip); + break; + } + } +} + +/** + * iort_find_its_domain_token() - find domain token based on given ITS ID. + * @translation_id: ITS ID + * + * Returns: domain token when find on the list, NULL otherwise. + */ +struct fwnode_handle *iort_its_find_domain_token(int trans_id) +{ + struct iort_its_msi_chip *its_msi_chip; + + list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) { + if (its_msi_chip->translation_id == trans_id) + return its_msi_chip->fw_node; + } + + return NULL; +} + +static struct acpi_iort_node * +iort_scan_node(enum acpi_iort_node_type type, + iort_find_node_callback callback, void *context) +{ + struct acpi_iort_node *iort_node, *iort_end; + struct acpi_table_iort *iort; + int i; + + if (!iort_table) + return NULL; + + /* + * iort_table and iort both point to the start of IORT table, but + * have different struct types + */ + iort = (struct acpi_table_iort *)iort_table; + + /* Get the first IORT node */ + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort, + iort->node_offset); + iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + iort_table->length); + + for (i = 0; i < iort->node_count; i++) { + if (iort_node >= iort_end) { + pr_err("iort node pointer overflows, bad table\n"); + return NULL; + } + + if (iort_node->type == type) { + if (ACPI_SUCCESS(callback(iort_node, context))) + return iort_node; + } + + iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node, + iort_node->length); + } + + return NULL; +} + +static acpi_status +iort_find_dev_callback(struct acpi_iort_node *node, void *context) +{ + struct acpi_iort_root_complex *pci_rc; + struct device *dev = context; + struct pci_bus *bus; + + switch (node->type) { + case ACPI_IORT_NODE_PCI_ROOT_COMPLEX: + bus = to_pci_bus(dev); + pci_rc = (struct acpi_iort_root_complex *)node->node_data; + + /* + * It is assumed that PCI segment numbers maps one-to-one + * with root complexes. Each segment number can represent only + * one root complex. + */ + if (pci_rc->pci_segment_number == pci_domain_nr(bus)) + return AE_OK; + + break; + } + + return AE_NOT_FOUND; +} + +static struct acpi_iort_node * +iort_dev_map_rid(struct acpi_iort_node *node, u32 rid_in, + u32 *rid_out) +{ + + if (!node) + goto out; + + /* Go upstream */ + while (node->type != ACPI_IORT_NODE_ITS_GROUP) { + struct acpi_iort_id_mapping *id; + int i, found = 0; + + /* Exit when no mapping array */ + if (!node->mapping_offset || !node->mapping_count) + return NULL; + + id = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node, + node->mapping_offset); + + for (i = 0, found = 0; i < node->mapping_count; i++, id++) { + /* + * Single mapping is not translation rule, + * lets move on for this case + */ + if (id->flags & ACPI_IORT_ID_SINGLE_MAPPING) { + if (node->type != ACPI_IORT_NODE_SMMU) { + rid_in = id->output_base; + found = 1; + break; + } + + pr_warn(FW_BUG "[node %p type %d] SINGLE MAPPING flag not allowed for SMMU node, skipping ID map\n", + node, node->type); + continue; + } + + if (rid_in < id->input_base || + (rid_in > id->input_base + id->id_count)) + continue; + + rid_in = id->output_base + (rid_in - id->input_base); + found = 1; + break; + } + + if (!found) + return NULL; + + /* Firmware bug! */ + if (!id->output_reference) { + pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n", + node, node->type); + return NULL; + } + + node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table, + id->output_reference); + } + +out: + if (rid_out) + *rid_out = rid_in; + return node; +} + +static struct acpi_iort_node * +iort_its_find_node_and_map_rid(struct pci_dev *pdev, u32 req_id, u32 *dev_id) +{ + struct pci_bus *pbus = pdev->bus; + struct acpi_iort_node *node; + + /* Find a PCI root bus */ + while (!pci_is_root_bus(pbus)) + pbus = pbus->parent; + + + node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, + iort_find_dev_callback, &pbus->dev); + if (!node) { + dev_err(&pdev->dev, "can't find related IORT node\n"); + return NULL; + } + + return iort_dev_map_rid(node, req_id, dev_id); +} + +/** + * iort_pci_domain_get_msi_rid() - find MSI RID based on PCI device ID + * @pdev: The PCI device + * @req_id: The PCI device requester ID + * + * Returns: MSI RID on success, input requester ID otherwise + */ +u32 iort_pci_get_msi_rid(struct pci_dev *pdev, u32 req_id) +{ + u32 dev_id; + + if (!iort_its_find_node_and_map_rid(pdev, req_id, &dev_id)) + return req_id; + + return dev_id; +} + +/** + * iort_pci_find_its_id() - find the ITS identifier based on specified device. + * @pdev: The PCI device + * @idx: Index of the ITS identifier list + * @its_id: ITS identifier + * + * Returns: 0 on success, appropriate error value otherwise + */ +static int +iort_pci_find_its_id(struct pci_dev *pdev, u32 req_id, unsigned int idx, + int *its_id) +{ + struct acpi_iort_its_group *its; + struct acpi_iort_node *node; + + node = iort_its_find_node_and_map_rid(pdev, req_id, NULL); + if (!node) + return -ENXIO; + + /* Move to ITS specific data */ + its = (struct acpi_iort_its_group *)node->node_data; + if (idx > its->its_count) { + dev_err(&pdev->dev, "requested ITS ID index [%d] is greater than available[%d]\n", + idx, its->its_count); + return -ENXIO; + } + + *its_id = its->identifiers[idx]; + return 0; +} + +/** + * iort_pci_get_msi_domain_handle() - find registered domain token related to + * PCI device + * @pdev: The PCI device + * @req_id: The PCI device requester ID + * + * Returns: the MSI domain for this device, NULL otherwise + */ +struct irq_domain * +iort_pci_get_domain(struct pci_dev *pdev, u32 req_id) +{ + static struct fwnode_handle *handle; + int its_id; + + if (iort_pci_find_its_id(pdev, req_id, 0, &its_id)) + return NULL; + + handle = iort_its_find_domain_token(its_id); + if (!handle) + return NULL; + + return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI); +} + +static int __init iort_table_detect(void) +{ + acpi_status status; + + if (acpi_disabled) + return -ENODEV; + + status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table); + if (ACPI_FAILURE(status)) { + const char *msg = acpi_format_exception(status); + pr_err("Failed to get table, %s\n", msg); + return -EINVAL; + } + + return 0; +} +arch_initcall(iort_table_detect); diff --git a/include/linux/iort.h b/include/linux/iort.h new file mode 100644 index 0000000..490ff4d --- /dev/null +++ b/include/linux/iort.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2016, Semihalf + * Author: Tomasz Nowicki <tn@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + */ + +#ifndef __IORT_H__ +#define __IORT_H__ + +#include <linux/acpi.h> + +struct fwnode_handle; +int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node); +void iort_deregister_domain_token(int trans_id); +struct fwnode_handle *iort_its_find_domain_token(int trans_id); +#ifdef CONFIG_IORT_TABLE +u32 iort_pci_get_msi_rid(struct pci_dev *pdev, u32 req_id); +struct irq_domain *iort_pci_get_domain(struct pci_dev *pdev, u32 req_id); +#else +static inline u32 iort_pci_get_msi_rid(struct pci_dev *pdev, u32 req_id) +{ return req_id; } +static inline struct irq_domain * +iort_pci_get_domain(struct pci_dev *pdev, u32 req_id) { return NULL; } +#endif + +#endif /* __IORT_H__ */
IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. Initial support allows to: - register ITS MSI chip along with ITS translation ID and domain token - deregister ITS MSI chip based on ITS translation ID - find registered domain token based on ITS translation ID - map MSI RID based on PCI device and requester ID - find domain token based on PCI device and requester ID Signed-off-by: Tomasz Nowicki <tn@semihalf.com> --- drivers/acpi/Kconfig | 3 + drivers/acpi/Makefile | 1 + drivers/acpi/iort.c | 344 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/iort.h | 38 ++++++ 4 files changed, 386 insertions(+) create mode 100644 drivers/acpi/iort.c create mode 100644 include/linux/iort.h