| Message ID | 1464731280-24588-1-git-send-email-javier@osg.samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 05/31/2016 11:48 PM, Javier Martinez Canillas wrote: > The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the > LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins. > > Add this regulator as the input supply of the Thermal Management Unit > channels and also remove the always-on property since all the devices > using LDO10 as input supply are now defined. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > > arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++- > arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++- > 2 files changed, 40 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts > index c1247402cb17..a55760b5fa82 100644 > --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts > +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts > @@ -425,7 +425,6 @@ > regulator-name = "vdd_ldo10"; > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > - regulator-always-on; > regulator-state-mem { > regulator-off-in-suspend; > }; > @@ -924,6 +923,26 @@ > assigned-clock-parents = <&clock CLK_FIN_PLL>; > }; > > +&tmu_cpu0 { > + vtmu-supply = <&ldo10_reg>; > +}; > + > +&tmu_cpu1 { > + vtmu-supply = <&ldo10_reg>; > +}; > + > +&tmu_cpu2 { > + vtmu-supply = <&ldo10_reg>; > +}; > + > +&tmu_cpu3 { > + vtmu-supply = <&ldo10_reg>; > +}; > + > +&tmu_gpu { > + vtmu-supply = <&ldo10_reg>; > +}; > + Here and for Peach Pi please put the nodes in alphabetical order. Best regards, Krzysztof
Hello Krzysztof, On 06/01/2016 04:50 AM, Krzysztof Kozlowski wrote: > On 05/31/2016 11:48 PM, Javier Martinez Canillas wrote: [snip] >> >> +&tmu_cpu0 { >> + vtmu-supply = <&ldo10_reg>; >> +}; >> + >> +&tmu_cpu1 { >> + vtmu-supply = <&ldo10_reg>; >> +}; >> + >> +&tmu_cpu2 { >> + vtmu-supply = <&ldo10_reg>; >> +}; >> + >> +&tmu_cpu3 { >> + vtmu-supply = <&ldo10_reg>; >> +}; >> + >> +&tmu_gpu { >> + vtmu-supply = <&ldo10_reg>; >> +}; >> + > > Here and for Peach Pi please put the nodes in alphabetical order. > Right, sorry. I completely forgot about keeping the order. > Best regards, > Krzysztof > Best regards,
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index c1247402cb17..a55760b5fa82 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -425,7 +425,6 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -924,6 +923,26 @@ assigned-clock-parents = <&clock CLK_FIN_PLL>; }; +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo10_reg>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index af1c9b9a63f9..34cc6cee0cdb 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -425,7 +425,6 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -900,6 +899,26 @@ assigned-clock-parents = <&clock CLK_FIN_PLL>; }; +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo10_reg>; +}; + &rtc { status = "okay"; clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins. Add this regulator as the input supply of the Thermal Management Unit channels and also remove the always-on property since all the devices using LDO10 as input supply are now defined. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++- arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++- 2 files changed, 40 insertions(+), 2 deletions(-)