| Message ID | 1464936651-25911-2-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi,
[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.7-rc1 next-20160603]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Chen-Yu-Tsai/ARM-dts-sun9i-a80-optimus-Drop-sunxi-common-regulators-dtsi/20160603-145402
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux for-next
config: arm-multi_v7_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 5.3.1-8) 5.3.1 20160205
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=arm
All errors (new ones prefixed by >>):
>> ERROR: Input tree has errors, aborting (use -f to force output)
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 6cfc02194035..78fddd9152a5 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -85,6 +84,17 @@ }; }; + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_optimus>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -172,12 +182,6 @@ allwinner,drive = <SUN4I_PINCTRL_40_MA>; }; -®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_optimus>; - gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - status = "okay"; -}; - &r_ir { status = "okay"; };
sunxi-common-regulators.dtsi provided dummy regulators vcc3v0, vcc3v3, vcc5v0. 3.0V/3.3V and 5.0V are commonly used voltages in Allwinner devices. These dummy regulators provide a stand-in when bindings that require one, but the real regulator is not supported yet. Since these are no longer needed, we can drop the include file by copying over reg_usb1_vbus. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)