@@ -118,11 +118,7 @@
#endif
#if defined(CONFIG_CPU_V7M)
-# ifdef _CACHE
# define MULTI_CACHE 1
-# else
-# define _CACHE nop
-# endif
#endif
#if !defined(_CACHE) && !defined(MULTI_CACHE)
@@ -158,7 +158,21 @@ __after_proc_init:
bic r0, r0, #CR_V
#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
-#endif /* CONFIG_CPU_CP15 */
+#elif defined (CONFIG_CPU_V7M)
+ /* For V7M systems we want to modify the CCR similarly to the SCTLR */
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+ bic r0, r0, #V7M_SCB_CCR_DC
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+ bic r0, r0, #V7M_SCB_CCR_BP
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+ bic r0, r0, #V7M_SCB_CCR_IC
+#endif
+ movw r3, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
+ movt r3, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
+ str r0, [r3]
+#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
ret lr
ENDPROC(__after_proc_init)
.ltorg
@@ -403,6 +403,7 @@ config CPU_V7M
bool
select CPU_32v7M
select CPU_ABRT_NOMMU
+ select CPU_CACHE_V7
select CPU_CACHE_NOP
select CPU_PABRT_LEGACY
select CPU_THUMBONLY
@@ -750,14 +751,14 @@ config CPU_HIGH_VECTOR
config CPU_ICACHE_DISABLE
bool "Disable I-Cache (I-bit)"
- depends on CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
+ depends on (CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)) || CPU_V7M
help
Say Y here to disable the processor instruction cache. Unless
you have a reason not to or are unsure, say N.
config CPU_DCACHE_DISABLE
bool "Disable D-Cache (C-bit)"
- depends on CPU_CP15 && !SMP
+ depends on (CPU_CP15 && !SMP) || CPU_V7M
help
Say Y here to disable the processor data cache. Unless
you have a reason not to or are unsure, say N.
@@ -792,7 +793,7 @@ config CPU_CACHE_ROUND_ROBIN
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
+ depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 || CPU_V7M
help
Say Y here to disable branch prediction. If unsure, say N.
@@ -45,7 +45,11 @@ obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
obj-$(CONFIG_CPU_CACHE_NOP) += cache-nop.o
AFLAGS_cache-v6.o :=-Wa,-march=armv6
+ifneq ($(CONFIG_CPU_V7M),y)
AFLAGS_cache-v7.o :=-Wa,-march=armv7-a
+else
+AFLAGS_cache-v7.o :=-Wa,-march=armv7-m
+endif
obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o
@@ -118,9 +118,8 @@ __v7m_setup:
@ Configure the System Control Register to ensure 8-byte stack alignment
@ Note the STKALIGN bit is either RW or RAO.
- ldr r12, [r0, V7M_SCB_CCR] @ system control register
- orr r12, #V7M_SCB_CCR_STKALIGN
- str r12, [r0, V7M_SCB_CCR]
+ ldr r0, [r0, V7M_SCB_CCR] @ system control register
+ orr r0, #V7M_SCB_CCR_STKALIGN
ret lr
ENDPROC(__v7m_setup)