diff mbox

[v2] arm: tegra124: remove commas from unit addresses

Message ID 1466298275-15753-1-git-send-email-marcel.ziswiler@toradex.com (mailing list archive)
State New, archived
Headers show

Commit Message

Marcel Ziswiler June 19, 2016, 1:04 a.m. UTC 
Remove commas from unit addresses as suggested by Rob Herring upon me
posting initial Apalis TK1 support:

http://article.gmane.org/gmane.linux.ports.tegra/26608

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

Changes in v2:
- leave gpu node untouched as fix-ups done by older U-Boot version
  otherwise may fail as pointed out by Stephen Warren

 arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi |   6 +-
 arch/arm/boot/dts/tegra124-jetson-tk1.dts      |  70 +++++++--------
 arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi   |   6 +-
 arch/arm/boot/dts/tegra124-nyan-big.dts        |   4 +-
 arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi |   6 +-
 arch/arm/boot/dts/tegra124-nyan-blaze.dts      |   2 +-
 arch/arm/boot/dts/tegra124-nyan.dtsi           |  60 ++++++-------
 arch/arm/boot/dts/tegra124-venice2.dts         |  70 +++++++--------
 arch/arm/boot/dts/tegra124.dtsi                | 120 ++++++++++++-------------
 9 files changed, 172 insertions(+), 172 deletions(-)

Comments

Stephen Warren June 20, 2016, 3:50 p.m. UTC | #1 
On 06/18/2016 07:04 PM, Marcel Ziswiler wrote:
> Remove commas from unit addresses as suggested by Rob Herring upon me
> posting initial Apalis TK1 support:
>
> http://article.gmane.org/gmane.linux.ports.tegra/26608

Acked-by: Stephen Warren <swarren@nvidia.com>
Thierry Reding June 20, 2016, 4:40 p.m. UTC | #2 
On Mon, Jun 20, 2016 at 09:50:26AM -0600, Stephen Warren wrote:
> On 06/18/2016 07:04 PM, Marcel Ziswiler wrote:
> > Remove commas from unit addresses as suggested by Rob Herring upon me
> > posting initial Apalis TK1 support:
> > 
> > http://article.gmane.org/gmane.linux.ports.tegra/26608
> 
> Acked-by: Stephen Warren <swarren@nvidia.com>

I'm confused now. I posted almost exactly the same patch a while ago and
we agreed that we couldn't do this because the node names were to be
considered part of the ABI.

Is it or is it not?

Thierry
Stephen Warren June 20, 2016, 4:45 p.m. UTC | #3 
On 06/20/2016 10:40 AM, Thierry Reding wrote:
> On Mon, Jun 20, 2016 at 09:50:26AM -0600, Stephen Warren wrote:
>> On 06/18/2016 07:04 PM, Marcel Ziswiler wrote:
>>> Remove commas from unit addresses as suggested by Rob Herring upon me
>>> posting initial Apalis TK1 support:
>>>
>>> http://article.gmane.org/gmane.linux.ports.tegra/26608
>>
>> Acked-by: Stephen Warren <swarren@nvidia.com>
>
> I'm confused now. I posted almost exactly the same patch a while ago and
> we agreed that we couldn't do this because the node names were to be
> considered part of the ABI.
>
> Is it or is it not?

The particular case where it matters is the GPU node, which U-Boot 
manipulates. This revised patch version no longer renames the GPU node 
and so in practice avoids any issues that I'm aware of.

If there's a more general rule that node names are part of the ABI, then 
indeed we shouldn't take this patch.
Thierry Reding June 20, 2016, 5:11 p.m. UTC | #4 
On Mon, Jun 20, 2016 at 10:45:55AM -0600, Stephen Warren wrote:
> On 06/20/2016 10:40 AM, Thierry Reding wrote:
> > On Mon, Jun 20, 2016 at 09:50:26AM -0600, Stephen Warren wrote:
> > > On 06/18/2016 07:04 PM, Marcel Ziswiler wrote:
> > > > Remove commas from unit addresses as suggested by Rob Herring upon me
> > > > posting initial Apalis TK1 support:
> > > > 
> > > > http://article.gmane.org/gmane.linux.ports.tegra/26608
> > > 
> > > Acked-by: Stephen Warren <swarren@nvidia.com>
> > 
> > I'm confused now. I posted almost exactly the same patch a while ago and
> > we agreed that we couldn't do this because the node names were to be
> > considered part of the ABI.
> > 
> > Is it or is it not?
> 
> The particular case where it matters is the GPU node, which U-Boot
> manipulates. This revised patch version no longer renames the GPU node and
> so in practice avoids any issues that I'm aware of.
> 
> If there's a more general rule that node names are part of the ABI, then
> indeed we shouldn't take this patch.

I'm somewhat uncomfortable with this notion. Just because we don't know
of any other cases doesn't mean there aren't any. My understanding is
that it's fairly common to look up device tree nodes by name, however
brittle that may be.

There's also the matter of consistency to consider here. I suspect that
if we make this change somebody will notice the odd one out and send
patches to "fix it up". So if we get confirmation about this change
being okay, I'd request that a comment be added to the GPU node as to
why it is not converted.

Thierry
Marcel Ziswiler June 21, 2016, 7:56 a.m. UTC | #5 
On Mon, 2016-06-20 at 19:11 +0200, Thierry Reding wrote:
> On Mon, Jun 20, 2016 at 10:45:55AM -0600, Stephen Warren wrote:
> > 
> > On 06/20/2016 10:40 AM, Thierry Reding wrote:
> > > 
> > > On Mon, Jun 20, 2016 at 09:50:26AM -0600, Stephen Warren wrote:
> > > > 
> > > > On 06/18/2016 07:04 PM, Marcel Ziswiler wrote:
> > > > > 
> > > > > Remove commas from unit addresses as suggested by Rob Herring
> > > > > upon me
> > > > > posting initial Apalis TK1 support:
> > > > > 
> > > > > http://article.gmane.org/gmane.linux.ports.tegra/26608
> > > > Acked-by: Stephen Warren <swarren@nvidia.com>
> > > I'm confused now. I posted almost exactly the same patch a while
> > > ago and
> > > we agreed that we couldn't do this because the node names were to
> > > be
> > > considered part of the ABI.
> > > 
> > > Is it or is it not?
> > The particular case where it matters is the GPU node, which U-Boot
> > manipulates. This revised patch version no longer renames the GPU
> > node and
> > so in practice avoids any issues that I'm aware of.
> > 
> > If there's a more general rule that node names are part of the ABI,
> > then
> > indeed we shouldn't take this patch.
> I'm somewhat uncomfortable with this notion. Just because we don't
> know
> of any other cases doesn't mean there aren't any. My understanding is
> that it's fairly common to look up device tree nodes by name, however
> brittle that may be.
> 
> There's also the matter of consistency to consider here. I suspect
> that
> if we make this change somebody will notice the odd one out and send
> patches to "fix it up". So if we get confirmation about this change
> being okay, I'd request that a comment be added to the GPU node as to
> why it is not converted.

Sure, let me add such a comment in a v3 that it is crystal clear why we
did so.

> Thierry


Thanks Thierry.

Cheers

Marcel
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
index 2c5cede..accb705 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
@@ -1,5 +1,5 @@ 
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -78,7 +78,7 @@ 
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -2101,7 +2101,7 @@ 
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index f6f5d3c..a020e76 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -10,8 +10,8 @@ 
 	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 
 		/* This order keeps the mapping DB9 connector <-> ttyS0 */
 		serial0 = &uartd;
@@ -27,7 +27,7 @@ 
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		status = "okay";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -40,21 +40,21 @@ 
 
 		/* Mini PCIe */
 		pci@1,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 
 		/* Gigabit Ethernet */
 		pci@2,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			hdmi-supply = <&vdd_5v0_hdmi>;
@@ -75,7 +75,7 @@ 
 		vdd-supply = <&vdd_gpu>;
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 
@@ -1404,12 +1404,12 @@ 
 	};
 
 	/* DB9 serial port */
-	serial@0,70006300 {
+	serial@70006300 {
 		status = "okay";
 	};
 
 	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -1437,25 +1437,25 @@ 
 	};
 
 	/* Expansion GEN2_I2C_* */
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion CAM_I2C_* */
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* HDMI DDC */
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion PWR_I2C_*, on-board components */
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -1646,12 +1646,12 @@ 
 	};
 
 	/* Expansion TS_SPI_* */
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 	};
 
 	/* Internal SPI */
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -1661,7 +1661,7 @@ 
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -1680,10 +1680,10 @@ 
 	};
 
 	/* Serial ATA */
-	sata@0,70020000 {
+	sata@70020000 {
 		status = "okay";
 
-		phys = <&{/padctl@0,7009f000/pads/sata/lanes/sata-0}>;
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
 
 		hvdd-supply = <&vdd_3v3_lp0>;
@@ -1694,15 +1694,15 @@ 
 		target-12v-supply = <&vdd_12v0_sata>;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -1717,7 +1717,7 @@ 
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		status = "okay";
 
 		pads {
@@ -1804,7 +1804,7 @@ 
 	};
 
 	/* SD card */
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1814,40 +1814,40 @@ 
 	};
 
 	/* eMMC */
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
 	/* CPU DFLL clock */
-	clock@0,70110000 {
+	clock@70110000 {
 		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
 	/* mini-PCIe USB */
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 	};
 
 	/* USB A connector */
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
index 1a5748d..4458e86 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
@@ -1,5 +1,5 @@ 
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@ 
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@ 
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index 2d21253..67d7cfb 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -15,7 +15,7 @@ 
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 	};
 
@@ -26,7 +26,7 @@ 
 		nvidia,model = "GoogleNyanBig";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
index 9ecd108..4e7b59e 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
@@ -1,5 +1,5 @@ 
 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@ 
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@ 
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 0d30c51..c9582361 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -22,7 +22,7 @@ 
 		nvidia,model = "GoogleNyanBlaze";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 0710a60..271505e 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -3,8 +3,8 @@ 
 
 / {
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
@@ -16,8 +16,8 @@ 
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -29,29 +29,29 @@ 
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
 	};
 
-	serial@0,70006000 {
+	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -72,7 +72,7 @@ 
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -85,7 +85,7 @@ 
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -95,12 +95,12 @@ 
 		};
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -301,7 +301,7 @@ 
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -342,7 +342,7 @@ 
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 
@@ -353,7 +353,7 @@ 
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -364,16 +364,16 @@ 
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -388,7 +388,7 @@ 
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		status = "okay";
 
 		pads {
@@ -467,7 +467,7 @@ 
 		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	sdhci@0,700b0000 { /* WiFi/BT on this bus */
+	sdhci@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
 		no-1-8-v;
@@ -478,7 +478,7 @@ 
 		keep-power-in-suspend;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -487,7 +487,7 @@ 
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 { /* eMMC on this bus */
+	sdhci@700b0600 { /* eMMC on this bus */
 		status = "okay";
 		bus-width = <8>;
 		no-1-8-v;
@@ -495,14 +495,14 @@ 
 	};
 
 	/* CPU DFLL clock */
-	clock@0,70110000 {
+	clock@70110000 {
 		status = "disabled";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 973446d..6e59cec 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -8,8 +8,8 @@ 
 	compatible = "nvidia,venice2", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
@@ -21,8 +21,8 @@ 
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -34,14 +34,14 @@ 
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
@@ -55,7 +55,7 @@ 
 		vdd-supply = <&vdd_gpu>;
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
@@ -596,15 +596,15 @@ 
 		};
 	};
 
-	serial@0,70006000 {
+	serial@70006000 {
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -616,7 +616,7 @@ 
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -629,17 +629,17 @@ 
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -834,7 +834,7 @@ 
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -874,7 +874,7 @@ 
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -884,7 +884,7 @@ 
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -895,16 +895,16 @@ 
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -919,7 +919,7 @@ 
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		pads {
 			usb2 {
 				status = "okay";
@@ -998,7 +998,7 @@ 
 		};
 	};
 
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
@@ -1007,41 +1007,41 @@ 
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d000000 {
+	usb-phy@7d000000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb1_vbus>;
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 		vbus-supply = <&vdd_run_cam>;
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index ea48118..f0df6ce 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -14,7 +14,7 @@ 
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -77,7 +77,7 @@ 
 		};
 	};
 
-	host1x@0,50000000 {
+	host1x@50000000 {
 		compatible = "nvidia,tegra124-host1x", "simple-bus";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -91,7 +91,7 @@ 
 
 		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
 
-		dc@0,54200000 {
+		dc@54200000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@ 
 			nvidia,head = <0>;
 		};
 
-		dc@0,54240000 {
+		dc@54240000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -121,7 +121,7 @@ 
 			nvidia,head = <1>;
 		};
 
-		hdmi@0,54280000 {
+		hdmi@54280000 {
 			compatible = "nvidia,tegra124-hdmi";
 			reg = <0x0 0x54280000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -133,7 +133,7 @@ 
 			status = "disabled";
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			compatible = "nvidia,tegra124-sor";
 			reg = <0x0 0x54540000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -147,7 +147,7 @@ 
 			status = "disabled";
 		};
 
-		dpaux: dpaux@0,545c0000 {
+		dpaux: dpaux@545c0000 {
 			compatible = "nvidia,tegra124-dpaux";
 			reg = <0x0 0x545c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
@@ -160,7 +160,7 @@ 
 		};
 	};
 
-	gic: interrupt-controller@0,50041000 {
+	gic: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -203,7 +203,7 @@ 
 		interrupt-parent = <&gic>;
 	};
 
-	timer@0,60005000 {
+	timer@60005000 {
 		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,7 +215,7 @@ 
 		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
 	};
 
-	tegra_car: clock@0,60006000 {
+	tegra_car: clock@60006000 {
 		compatible = "nvidia,tegra124-car";
 		reg = <0x0 0x60006000 0x0 0x1000>;
 		#clock-cells = <1>;
@@ -223,12 +223,12 @@ 
 		nvidia,external-memory-controller = <&emc>;
 	};
 
-	flow-controller@0,60007000 {
+	flow-controller@60007000 {
 		compatible = "nvidia,tegra124-flowctrl";
 		reg = <0x0 0x60007000 0x0 0x1000>;
 	};
 
-	actmon@0,6000c800 {
+	actmon@6000c800 {
 		compatible = "nvidia,tegra124-actmon";
 		reg = <0x0 0x6000c800 0x0 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -239,7 +239,7 @@ 
 		reset-names = "actmon";
 	};
 
-	gpio: gpio@0,6000d000 {
+	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -259,7 +259,7 @@ 
 		*/
 	};
 
-	apbdma: dma@0,60020000 {
+	apbdma: dma@60020000 {
 		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
 		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -300,13 +300,13 @@ 
 		#dma-cells = <1>;
 	};
 
-	apbmisc@0,70000800 {
+	apbmisc@70000800 {
 		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
 		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
 		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		compatible = "nvidia,tegra124-pinmux";
 		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
 		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
@@ -321,7 +321,7 @@ 
 	 * the APB DMA based serial driver, the compatible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	uarta: serial@0,70006000 {
+	uarta: serial@70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
@@ -334,7 +334,7 @@ 
 		status = "disabled";
 	};
 
-	uartb: serial@0,70006040 {
+	uartb: serial@70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
@@ -347,7 +347,7 @@ 
 		status = "disabled";
 	};
 
-	uartc: serial@0,70006200 {
+	uartc: serial@70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
@@ -360,7 +360,7 @@ 
 		status = "disabled";
 	};
 
-	uartd: serial@0,70006300 {
+	uartd: serial@70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;
@@ -373,7 +373,7 @@ 
 		status = "disabled";
 	};
 
-	pwm: pwm@0,7000a000 {
+	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
@@ -383,7 +383,7 @@ 
 		status = "disabled";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -398,7 +398,7 @@ 
 		status = "disabled";
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -413,7 +413,7 @@ 
 		status = "disabled";
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -428,7 +428,7 @@ 
 		status = "disabled";
 	};
 
-	i2c@0,7000c700 {
+	i2c@7000c700 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -443,7 +443,7 @@ 
 		status = "disabled";
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -458,7 +458,7 @@ 
 		status = "disabled";
 	};
 
-	i2c@0,7000d100 {
+	i2c@7000d100 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +473,7 @@ 
 		status = "disabled";
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d400 0x0 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -488,7 +488,7 @@ 
 		status = "disabled";
 	};
 
-	spi@0,7000d600 {
+	spi@7000d600 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d600 0x0 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -503,7 +503,7 @@ 
 		status = "disabled";
 	};
 
-	spi@0,7000d800 {
+	spi@7000d800 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d800 0x0 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -518,7 +518,7 @@ 
 		status = "disabled";
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000da00 0x0 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -533,7 +533,7 @@ 
 		status = "disabled";
 	};
 
-	spi@0,7000dc00 {
+	spi@7000dc00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000dc00 0x0 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -548,7 +548,7 @@ 
 		status = "disabled";
 	};
 
-	spi@0,7000de00 {
+	spi@7000de00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000de00 0x0 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -563,21 +563,21 @@ 
 		status = "disabled";
 	};
 
-	rtc@0,7000e000 {
+	rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 	};
 
-	fuse@0,7000f800 {
+	fuse@7000f800 {
 		compatible = "nvidia,tegra124-efuse";
 		reg = <0x0 0x7000f800 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
@@ -586,7 +586,7 @@ 
 		reset-names = "fuse";
 	};
 
-	mc: memory-controller@0,70019000 {
+	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
 		clocks = <&tegra_car TEGRA124_CLK_MC>;
@@ -597,14 +597,14 @@ 
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@0,7001b000 {
+	emc: emc@7001b000 {
 		compatible = "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
 
 		nvidia,memory-controller = <&mc>;
 	};
 
-	sata@0,70020000 {
+	sata@70020000 {
 		compatible = "nvidia,tegra124-ahci";
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
@@ -621,7 +621,7 @@ 
 		status = "disabled";
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
 		reg = <0x0 0x70030000 0x0 0x10000>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -636,7 +636,7 @@ 
 		status = "disabled";
 	};
 
-	usb@0,70090000 {
+	usb@70090000 {
 		compatible = "nvidia,tegra124-xusb";
 		reg = <0x0 0x70090000 0x0 0x8000>,
 		      <0x0 0x70098000 0x0 0x1000>,
@@ -671,7 +671,7 @@ 
 		status = "disabled";
 	};
 
-	padctl: padctl@0,7009f000 {
+	padctl: padctl@7009f000 {
 		compatible = "nvidia,tegra124-xusb-padctl";
 		reg = <0x0 0x7009f000 0x0 0x1000>;
 		resets = <&tegra_car 142>;
@@ -804,7 +804,7 @@ 
 		};
 	};
 
-	sdhci@0,700b0000 {
+	sdhci@700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -814,7 +814,7 @@ 
 		status = "disabled";
 	};
 
-	sdhci@0,700b0200 {
+	sdhci@700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -824,7 +824,7 @@ 
 		status = "disabled";
 	};
 
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -834,7 +834,7 @@ 
 		status = "disabled";
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -844,7 +844,7 @@ 
 		status = "disabled";
 	};
 
-	soctherm: thermal-sensor@0,700e2000 {
+	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
 		reg = <0x0 0x700e2000 0x0 0x1000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -856,7 +856,7 @@ 
 		#thermal-sensor-cells = <1>;
 	};
 
-	dfll: clock@0,70110000 {
+	dfll: clock@70110000 {
 		compatible = "nvidia,tegra124-dfll";
 		reg = <0 0x70110000 0 0x100>, /* DFLL control */
 		      <0 0x70110000 0 0x100>, /* I2C output control */
@@ -880,7 +880,7 @@ 
 		status = "disabled";
 	};
 
-	ahub@0,70300000 {
+	ahub@70300000 {
 		compatible = "nvidia,tegra124-ahub";
 		reg = <0x0 0x70300000 0x0 0x200>,
 		      <0x0 0x70300800 0x0 0x800>,
@@ -932,7 +932,7 @@ 
 		#address-cells = <2>;
 		#size-cells = <2>;
 
-		tegra_i2s0: i2s@0,70301000 {
+		tegra_i2s0: i2s@70301000 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301000 0x0 0x100>;
 			nvidia,ahub-cif-ids = <4 4>;
@@ -942,7 +942,7 @@ 
 			status = "disabled";
 		};
 
-		tegra_i2s1: i2s@0,70301100 {
+		tegra_i2s1: i2s@70301100 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301100 0x0 0x100>;
 			nvidia,ahub-cif-ids = <5 5>;
@@ -952,7 +952,7 @@ 
 			status = "disabled";
 		};
 
-		tegra_i2s2: i2s@0,70301200 {
+		tegra_i2s2: i2s@70301200 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301200 0x0 0x100>;
 			nvidia,ahub-cif-ids = <6 6>;
@@ -962,7 +962,7 @@ 
 			status = "disabled";
 		};
 
-		tegra_i2s3: i2s@0,70301300 {
+		tegra_i2s3: i2s@70301300 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301300 0x0 0x100>;
 			nvidia,ahub-cif-ids = <7 7>;
@@ -972,7 +972,7 @@ 
 			status = "disabled";
 		};
 
-		tegra_i2s4: i2s@0,70301400 {
+		tegra_i2s4: i2s@70301400 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301400 0x0 0x100>;
 			nvidia,ahub-cif-ids = <8 8>;
@@ -983,7 +983,7 @@ 
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d000000 0x0 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -995,7 +995,7 @@ 
 		status = "disabled";
 	};
 
-	phy1: usb-phy@0,7d000000 {
+	phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -1020,7 +1020,7 @@ 
 		status = "disabled";
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d004000 0x0 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -1032,7 +1032,7 @@ 
 		status = "disabled";
 	};
 
-	phy2: usb-phy@0,7d004000 {
+	phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -1056,7 +1056,7 @@ 
 		status = "disabled";
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d008000 0x0 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -1068,7 +1068,7 @@ 
 		status = "disabled";
 	};
 
-	phy3: usb-phy@0,7d008000 {
+	phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;