@@ -788,144 +788,7 @@ static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
}
#endif
-#ifdef CONFIG_BL_SWITCHER
-/*
- * gic_send_sgi - send a SGI directly to given CPU interface number
- *
- * cpu_id: the ID for the destination CPU interface
- * irq: the IPI number to send a SGI for
- */
-void gic_send_sgi(unsigned int cpu_id, unsigned int irq)
-{
- BUG_ON(cpu_id >= NR_GIC_CPU_IF);
- cpu_id = 1 << cpu_id;
- /* this always happens on GIC0 */
- writel_relaxed((cpu_id << 16) | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
-}
-
-/*
- * gic_get_cpu_id - get the CPU interface ID for the specified CPU
- *
- * @cpu: the logical CPU number to get the GIC ID for.
- *
- * Return the CPU interface ID for the given logical CPU number,
- * or -1 if the CPU number is too large or the interface ID is
- * unknown (more than one bit set).
- */
-int gic_get_cpu_id(unsigned int cpu)
-{
- unsigned int cpu_bit;
-
- if (cpu >= NR_GIC_CPU_IF)
- return -1;
- cpu_bit = gic_cpu_map[cpu];
- if (cpu_bit & (cpu_bit - 1))
- return -1;
- return __ffs(cpu_bit);
-}
-
-/*
- * gic_migrate_target - migrate IRQs to another CPU interface
- *
- * @new_cpu_id: the CPU target ID to migrate IRQs to
- *
- * Migrate all peripheral interrupts with a target matching the current CPU
- * to the interface corresponding to @new_cpu_id. The CPU interface mapping
- * is also updated. Targets to other CPU interfaces are unchanged.
- * This must be called with IRQs locally disabled.
- */
-void gic_migrate_target(unsigned int new_cpu_id)
-{
- unsigned int cur_cpu_id, gic_irqs, gic_nr = 0;
- void __iomem *dist_base;
- int i, ror_val, cpu = smp_processor_id();
- u32 val, cur_target_mask, active_mask;
-
- BUG_ON(gic_nr >= CONFIG_ARM_GIC_MAX_NR);
-
- dist_base = gic_data_dist_base(&gic_data[gic_nr]);
- if (!dist_base)
- return;
- gic_irqs = gic_data[gic_nr].gic_irqs;
-
- cur_cpu_id = __ffs(gic_cpu_map[cpu]);
- cur_target_mask = 0x01010101 << cur_cpu_id;
- ror_val = (cur_cpu_id - new_cpu_id) & 31;
-
- raw_spin_lock(&irq_controller_lock);
-
- /* Update the target interface for this logical CPU */
- gic_cpu_map[cpu] = 1 << new_cpu_id;
-
- /*
- * Find all the peripheral interrupts targetting the current
- * CPU interface and migrate them to the new CPU interface.
- * We skip DIST_TARGET 0 to 7 as they are read-only.
- */
- for (i = 8; i < DIV_ROUND_UP(gic_irqs, 4); i++) {
- val = readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
- active_mask = val & cur_target_mask;
- if (active_mask) {
- val &= ~active_mask;
- val |= ror32(active_mask, ror_val);
- writel_relaxed(val, dist_base + GIC_DIST_TARGET + i*4);
- }
- }
-
- raw_spin_unlock(&irq_controller_lock);
-
- /*
- * Now let's migrate and clear any potential SGIs that might be
- * pending for us (cur_cpu_id). Since GIC_DIST_SGI_PENDING_SET
- * is a banked register, we can only forward the SGI using
- * GIC_DIST_SOFTINT. The original SGI source is lost but Linux
- * doesn't use that information anyway.
- *
- * For the same reason we do not adjust SGI source information
- * for previously sent SGIs by us to other CPUs either.
- */
- for (i = 0; i < 16; i += 4) {
- int j;
- val = readl_relaxed(dist_base + GIC_DIST_SGI_PENDING_SET + i);
- if (!val)
- continue;
- writel_relaxed(val, dist_base + GIC_DIST_SGI_PENDING_CLEAR + i);
- for (j = i; j < i + 4; j++) {
- if (val & 0xff)
- writel_relaxed((1 << (new_cpu_id + 16)) | j,
- dist_base + GIC_DIST_SOFTINT);
- val >>= 8;
- }
- }
-}
-
-/*
- * gic_get_sgir_physaddr - get the physical address for the SGI register
- *
- * REturn the physical address of the SGI register to be used
- * by some early assembly code when the kernel is not yet available.
- */
-static unsigned long gic_dist_physaddr;
-
-unsigned long gic_get_sgir_physaddr(void)
-{
- if (!gic_dist_physaddr)
- return 0;
- return gic_dist_physaddr + GIC_DIST_SOFTINT;
-}
-
-void __init gic_init_physaddr(struct device_node *node)
-{
- struct resource res;
- if (of_address_to_resource(node, 0, &res) == 0) {
- gic_dist_physaddr = res.start;
- pr_info("GIC physical location is %#lx\n", gic_dist_physaddr);
- }
-}
-
-#else
#define gic_init_physaddr(node) do { } while (0)
-#endif
static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
Remove no longer needed big.LITTLE switcher support. Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> --- drivers/irqchip/irq-gic.c | 137 ---------------------------------------------- 1 file changed, 137 deletions(-)