diff mbox

[1/4] spi: s3c64xx: rename goto labels to meaningful names

Message ID 1467980304-14093-2-git-send-email-andi.shyti@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andi Shyti July 8, 2016, 12:18 p.m. UTC 
In goto labels of the style of

  err4:
  err3:
  err2:
  err1:

is complex to insert in between new errors without renaming all
the goto statments. Replace the errX naming style to meaningful
names in order to make it easier to insert new goto exit ponts.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
 drivers/spi/spi-s3c64xx.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

Comments

Krzysztof Kozlowski July 8, 2016, 1:11 p.m. UTC | #1 
On 07/08/2016 02:18 PM, Andi Shyti wrote:
> In goto labels of the style of

s/In/The/

> 
>   err4:
>   err3:
>   err2:
>   err1:
> 
> is complex to insert in between new errors without renaming all

s/is/are/ (or just rewrite it... "The style of such goto labels... is")

> the goto statments. Replace the errX naming style to meaningful

s/statments/satements/

> names in order to make it easier to insert new goto exit ponts.

s/ponts/points/


> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
>  drivers/spi/spi-s3c64xx.c | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index 6f2e91a..2ab42b2 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -1071,7 +1071,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  		if (ret < 0) {
>  			dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
>  				ret);
> -			goto err0;
> +			goto err_deref_master;
>  		}
>  		sdd->port_id = ret;
>  	} else {
> @@ -1109,13 +1109,13 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  	sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res);
>  	if (IS_ERR(sdd->regs)) {
>  		ret = PTR_ERR(sdd->regs);
> -		goto err0;
> +		goto err_deref_master;
>  	}
>  
>  	if (sci->cfg_gpio && sci->cfg_gpio()) {
>  		dev_err(&pdev->dev, "Unable to config gpio\n");
>  		ret = -EBUSY;
> -		goto err0;
> +		goto err_deref_master;
>  	}
>  
>  	/* Setup clocks */
> @@ -1123,13 +1123,13 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  	if (IS_ERR(sdd->clk)) {
>  		dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
>  		ret = PTR_ERR(sdd->clk);
> -		goto err0;
> +		goto err_deref_master;
>  	}
>  
>  	if (clk_prepare_enable(sdd->clk)) {
>  		dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
>  		ret = -EBUSY;
> -		goto err0;
> +		goto err_deref_master;
>  	}
>  
>  	sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
> @@ -1138,13 +1138,13 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  		dev_err(&pdev->dev,
>  			"Unable to acquire clock '%s'\n", clk_name);
>  		ret = PTR_ERR(sdd->src_clk);
> -		goto err2;
> +		goto err_disable_clk;
>  	}
>  
>  	if (clk_prepare_enable(sdd->src_clk)) {
>  		dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
>  		ret = -EBUSY;
> -		goto err2;
> +		goto err_disable_clk;
>  	}
>  
>  	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
> @@ -1164,7 +1164,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  	if (ret != 0) {
>  		dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n",
>  			irq, ret);
> -		goto err3;
> +		goto err_power_off;
>  	}
>  
>  	writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN |
> @@ -1174,7 +1174,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  	ret = devm_spi_register_master(&pdev->dev, master);
>  	if (ret != 0) {
>  		dev_err(&pdev->dev, "cannot register SPI master: %d\n", ret);
> -		goto err3;
> +		goto err_power_off;
>  	}
>  
>  	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n",
> @@ -1188,15 +1188,15 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
>  
>  	return 0;
>  
> -err3:
> +err_power_off:

err_pm_put? There is no real power off here (noidle).

It's a nit so anyway:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

>  	pm_runtime_put_noidle(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
>  	pm_runtime_set_suspended(&pdev->dev);
>  
>  	clk_disable_unprepare(sdd->src_clk);
> -err2:
> +err_disable_clk:
>  	clk_disable_unprepare(sdd->clk);
> -err0:
> +err_deref_master:
>  	spi_master_put(master);
>  
>  	return ret;
>
Krzysztof Kozlowski July 8, 2016, 1:12 p.m. UTC | #2 
On 07/08/2016 03:11 PM, Krzysztof Kozlowski wrote:
> On 07/08/2016 02:18 PM, Andi Shyti wrote:
>> In goto labels of the style of
> 
> s/In/The/
> 
>>
>>   err4:
>>   err3:
>>   err2:
>>   err1:
>>
>> is complex to insert in between new errors without renaming all
> 
> s/is/are/ (or just rewrite it... "The style of such goto labels... is")
> 
>> the goto statments. Replace the errX naming style to meaningful
> 
> s/statments/satements/

Yeah, nice job (to me)... error in error correction. Of course
"statements"...

BR,
Krzysztof
diff mbox

Patch

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 6f2e91a..2ab42b2 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -1071,7 +1071,7 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 		if (ret < 0) {
 			dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
 				ret);
-			goto err0;
+			goto err_deref_master;
 		}
 		sdd->port_id = ret;
 	} else {
@@ -1109,13 +1109,13 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 	sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res);
 	if (IS_ERR(sdd->regs)) {
 		ret = PTR_ERR(sdd->regs);
-		goto err0;
+		goto err_deref_master;
 	}
 
 	if (sci->cfg_gpio && sci->cfg_gpio()) {
 		dev_err(&pdev->dev, "Unable to config gpio\n");
 		ret = -EBUSY;
-		goto err0;
+		goto err_deref_master;
 	}
 
 	/* Setup clocks */
@@ -1123,13 +1123,13 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 	if (IS_ERR(sdd->clk)) {
 		dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n");
 		ret = PTR_ERR(sdd->clk);
-		goto err0;
+		goto err_deref_master;
 	}
 
 	if (clk_prepare_enable(sdd->clk)) {
 		dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
 		ret = -EBUSY;
-		goto err0;
+		goto err_deref_master;
 	}
 
 	sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
@@ -1138,13 +1138,13 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"Unable to acquire clock '%s'\n", clk_name);
 		ret = PTR_ERR(sdd->src_clk);
-		goto err2;
+		goto err_disable_clk;
 	}
 
 	if (clk_prepare_enable(sdd->src_clk)) {
 		dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
 		ret = -EBUSY;
-		goto err2;
+		goto err_disable_clk;
 	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
@@ -1164,7 +1164,7 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n",
 			irq, ret);
-		goto err3;
+		goto err_power_off;
 	}
 
 	writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN |
@@ -1174,7 +1174,7 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "cannot register SPI master: %d\n", ret);
-		goto err3;
+		goto err_power_off;
 	}
 
 	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n",
@@ -1188,15 +1188,15 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 
 	return 0;
 
-err3:
+err_power_off:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 
 	clk_disable_unprepare(sdd->src_clk);
-err2:
+err_disable_clk:
 	clk_disable_unprepare(sdd->clk);
-err0:
+err_deref_master:
 	spi_master_put(master);
 
 	return ret;