diff mbox

[v2] arm: omap1_defconfig: convert to use libata PATA drivers

Message ID 1467985859-23500-2-git-send-email-b.zolnierkie@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Bartlomiej Zolnierkiewicz July 8, 2016, 1:50 p.m. UTC 
IDE subsystem has been deprecated since 2009 and the majority
(if not all) of Linux distributions have switched to use
libata for ATA support exclusively.  However there are still
some users (mostly old or/and embedded non-x86 systems) that
have not converted from using IDE subsystem to libata PATA
drivers.  This doesn't seem to be good thing in the long-term
for Linux as while there is less and less PATA systems left
in use:

* testing efforts are divided between two subsystems

* having duplicate drivers for same hardware confuses users

This patch converts omap1_defconfig to use libata PATA
drivers.

Cc: linux-omap@vger.kernel.org
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
v2:
- added Acked-by tag from Tony

 arch/arm/configs/omap1_defconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Aaro Koskinen July 8, 2016, 10:06 p.m. UTC | #1 
Hi,

On Fri, Jul 08, 2016 at 03:50:59PM +0200, Bartlomiej Zolnierkiewicz wrote:
> IDE subsystem has been deprecated since 2009 and the majority
> (if not all) of Linux distributions have switched to use
> libata for ATA support exclusively.  However there are still
> some users (mostly old or/and embedded non-x86 systems) that
> have not converted from using IDE subsystem to libata PATA
> drivers.  This doesn't seem to be good thing in the long-term
> for Linux as while there is less and less PATA systems left
> in use:
> 
> * testing efforts are divided between two subsystems
> 
> * having duplicate drivers for same hardware confuses users
> 
> This patch converts omap1_defconfig to use libata PATA
> drivers.
> 
> Cc: linux-omap@vger.kernel.org
> Acked-by: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

I have been using ATA/PATA_PCMCIA on OMAP1 already for a while, so:

Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>

A.

> ---
> v2:
> - added Acked-by tag from Tony
> 
>  arch/arm/configs/omap1_defconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
> index 0c8a787..6ffc984 100644
> --- a/arch/arm/configs/omap1_defconfig
> +++ b/arch/arm/configs/omap1_defconfig
> @@ -96,14 +96,14 @@ CONFIG_BLK_DEV_LOOP=y
>  CONFIG_BLK_DEV_RAM=y
>  CONFIG_BLK_DEV_RAM_COUNT=2
>  CONFIG_BLK_DEV_RAM_SIZE=8192
> -CONFIG_IDE=m
> -CONFIG_BLK_DEV_IDECS=m
>  CONFIG_SCSI=y
>  # CONFIG_SCSI_PROC_FS is not set
>  CONFIG_BLK_DEV_SD=y
>  CONFIG_CHR_DEV_ST=y
>  CONFIG_BLK_DEV_SR=y
>  CONFIG_CHR_DEV_SG=y
> +CONFIG_ATA=m
> +CONFIG_PATA_PCMCIA=m
>  CONFIG_NETDEVICES=y
>  CONFIG_TUN=y
>  CONFIG_PHYLIB=y
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 0c8a787..6ffc984 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -96,14 +96,14 @@  CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=m
+CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_PHYLIB=y