| Message ID | 1469482208-5071-1-git-send-email-iwamatsu@nigauri.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 07/25/2016 04:30 PM, Nobuhiro Iwamatsu wrote: > Add support for board based on the Altera Cyclone V SoC. > This board has the following functions: > - 1 GiB of DRAM > - 1 Gigabit ethernet > - 1 SD card slot > - 1 USB gadget port > - QSPI NOR Flash > - I2C EEPROMs and I2C RTC > - DVI output > - Audio port > > This commit supports without QSPI, DVI and Audio. > > Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/socfpga_cyclone5_sodia.dts | 115 +++++++++++++++++++++++++++ > 2 files changed, 116 insertions(+) > create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts > Applied! Thanks, Dinh
On August 12, 2016 12:53:53 PM MST, Dinh Nguyen <dinguyen@opensource.altera.com> wrote: >On 07/25/2016 04:30 PM, Nobuhiro Iwamatsu wrote: >> Add support for board based on the Altera Cyclone V SoC. >> This board has the following functions: >> - 1 GiB of DRAM >> - 1 Gigabit ethernet >> - 1 SD card slot >> - 1 USB gadget port >> - QSPI NOR Flash >> - I2C EEPROMs and I2C RTC >> - DVI output >> - Audio port >> >> This commit supports without QSPI, DVI and Audio. >> >> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/socfpga_cyclone5_sodia.dts | 115 >+++++++++++++++++++++++++++ >> 2 files changed, 116 insertions(+) >> create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts >> > >Applied! This DTS still has Ethernet PHY properties (skew et al.) that are at the Ethernet MAC node level while they should be at the Ethetnet PHY node level, it is not like you tripped over that before..
On 08/12/2016 03:26 PM, Florian Fainelli wrote: > On August 12, 2016 12:53:53 PM MST, Dinh Nguyen <dinguyen@opensource.altera.com> wrote: >> On 07/25/2016 04:30 PM, Nobuhiro Iwamatsu wrote: >>> Add support for board based on the Altera Cyclone V SoC. >>> This board has the following functions: >>> - 1 GiB of DRAM >>> - 1 Gigabit ethernet >>> - 1 SD card slot >>> - 1 USB gadget port >>> - QSPI NOR Flash >>> - I2C EEPROMs and I2C RTC >>> - DVI output >>> - Audio port >>> >>> This commit supports without QSPI, DVI and Audio. >>> >>> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> >>> --- >>> arch/arm/boot/dts/Makefile | 1 + >>> arch/arm/boot/dts/socfpga_cyclone5_sodia.dts | 115 >> +++++++++++++++++++++++++++ >>> 2 files changed, 116 insertions(+) >>> create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts >>> >> >> Applied! > > This DTS still has Ethernet PHY properties (skew et al.) that are at the Ethernet MAC node level while they should be at the Ethetnet PHY node level, it is not like you tripped over that before.. > Thanks for catching this. Nobuhiro, can you please fixup the ethernet node? Thanks, Dinh
Hi, 2016-08-19 0:01 GMT+09:00 Dinh Nguyen <dinguyen@opensource.altera.com>: > On 08/12/2016 03:26 PM, Florian Fainelli wrote: >> On August 12, 2016 12:53:53 PM MST, Dinh Nguyen <dinguyen@opensource.altera.com> wrote: >>> On 07/25/2016 04:30 PM, Nobuhiro Iwamatsu wrote: >>>> Add support for board based on the Altera Cyclone V SoC. >>>> This board has the following functions: >>>> - 1 GiB of DRAM >>>> - 1 Gigabit ethernet >>>> - 1 SD card slot >>>> - 1 USB gadget port >>>> - QSPI NOR Flash >>>> - I2C EEPROMs and I2C RTC >>>> - DVI output >>>> - Audio port >>>> >>>> This commit supports without QSPI, DVI and Audio. >>>> >>>> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> >>>> --- >>>> arch/arm/boot/dts/Makefile | 1 + >>>> arch/arm/boot/dts/socfpga_cyclone5_sodia.dts | 115 >>> +++++++++++++++++++++++++++ >>>> 2 files changed, 116 insertions(+) >>>> create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts >>>> >>> >>> Applied! >> >> This DTS still has Ethernet PHY properties (skew et al.) that are at the Ethernet MAC node level while they should be at the Ethetnet PHY node level, it is not like you tripped over that before.. >> > > Thanks for catching this. > > Nobuhiro, can you please fixup the ethernet node? > Okay, I will resend updated patch. Thanks for your reivew. > Thanks, > Dinh Best regards, Nobuhiro
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 06b6c2d..b85f872 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -650,6 +650,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ + socfpga_cyclone5_sodia.dtb \ socfpga_cyclone5_vining_fpga.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += \ diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts new file mode 100644 index 0000000..15354e5 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + aliases { + ethernet0 = &gmac1; + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + hps_led0 { + label = "hps:green:led0"; + gpios = <&portb 12 GPIO_ACTIVE_LOW>; + }; + + hps_led1 { + label = "hps:green:led1"; + gpios = <&portb 13 GPIO_ACTIVE_LOW>; + }; + + hps_led2 { + label = "hps:green:led2"; + gpios = <&portb 14 GPIO_ACTIVE_LOW>; + }; + + hps_led3 { + label = "hps:green:led3"; + gpios = <&portb 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&mmc0 { + cd-gpios = <&portb 18 0>; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +};
Add support for board based on the Altera Cyclone V SoC. This board has the following functions: - 1 GiB of DRAM - 1 Gigabit ethernet - 1 SD card slot - 1 USB gadget port - QSPI NOR Flash - I2C EEPROMs and I2C RTC - DVI output - Audio port This commit supports without QSPI, DVI and Audio. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/socfpga_cyclone5_sodia.dts | 115 +++++++++++++++++++++++++++ 2 files changed, 116 insertions(+) create mode 100644 arch/arm/boot/dts/socfpga_cyclone5_sodia.dts