diff mbox

[2/4] ARM: dts: STiH407-pinctrl: Update gpio-cells to 2

Message ID 1470834781-23232-3-git-send-email-patrice.chotard@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Patrice CHOTARD Aug. 10, 2016, 1:12 p.m. UTC 
From: Patrice Chotard <patrice.chotard@st.com>

This patch allows to use second parameter to the gpio
specifier, which is used to specify whether the gpio is
active high or low.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 52 +++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 26 deletions(-)

Comments

Linus Walleij Aug. 11, 2016, 2:08 p.m. UTC | #1 
On Wed, Aug 10, 2016 at 3:12 PM,  <patrice.chotard@st.com> wrote:

> From: Patrice Chotard <patrice.chotard@st.com>
>
> This patch allows to use second parameter to the gpio
> specifier, which is used to specify whether the gpio is
> active high or low.
>
> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a538ae5..5653840 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -58,7 +58,7 @@ 
 
 			pio0: gpio@09610000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -66,7 +66,7 @@ 
 			};
 			pio1: gpio@09611000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -74,7 +74,7 @@ 
 			};
 			pio2: gpio@09612000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -82,7 +82,7 @@ 
 			};
 			pio3: gpio@09613000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -90,7 +90,7 @@ 
 			};
 			pio4: gpio@09614000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -99,7 +99,7 @@ 
 
 			pio5: gpio@09615000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -373,7 +373,7 @@ 
 
 			pio10: pio@09200000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -381,7 +381,7 @@ 
 			};
 			pio11: pio@09201000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -389,7 +389,7 @@ 
 			};
 			pio12: pio@09202000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -397,7 +397,7 @@ 
 			};
 			pio13: pio@09203000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -405,7 +405,7 @@ 
 			};
 			pio14: pio@09204000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -413,7 +413,7 @@ 
 			};
 			pio15: pio@09205000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -421,7 +421,7 @@ 
 			};
 			pio16: pio@09206000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x6000 0x100>;
@@ -429,7 +429,7 @@ 
 			};
 			pio17: pio@09207000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x7000 0x100>;
@@ -437,7 +437,7 @@ 
 			};
 			pio18: pio@09208000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x8000 0x100>;
@@ -445,7 +445,7 @@ 
 			};
 			pio19: pio@09209000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x9000 0x100>;
@@ -930,7 +930,7 @@ 
 
 			pio20: pio@09210000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -951,7 +951,7 @@ 
 
 			pio30: gpio@09220000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -959,7 +959,7 @@ 
 			};
 			pio31: gpio@09221000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -967,7 +967,7 @@ 
 			};
 			pio32: gpio@09222000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -975,7 +975,7 @@ 
 			};
 			pio33: gpio@09223000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -983,7 +983,7 @@ 
 			};
 			pio34: gpio@09224000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -991,7 +991,7 @@ 
 			};
 			pio35: gpio@09225000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -1090,7 +1090,7 @@ 
 
 			pio40: gpio@09230000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0 0x100>;
@@ -1098,7 +1098,7 @@ 
 			};
 			pio41: gpio@09231000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -1106,7 +1106,7 @@ 
 			};
 			pio42: gpio@09232000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;