new file mode 100644
@@ -0,0 +1,453 @@
+/*
+ * linux/arch/arm/mm/cache-v7m.S
+ *
+ * Based on linux/arch/arm/mm/cache-v7.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is the "shell" of the ARMv7M processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/unwind.h>
+#include <asm/v7m.h>
+
+#include "proc-macros.S"
+
+/* Generic V7M read/write macros for memory mapped cache operations */
+.macro v7m_cache_read, rt, reg
+ movw \rt, #:lower16:BASEADDR_V7M_SCB + \reg
+ movt \rt, #:upper16:BASEADDR_V7M_SCB + \reg
+ ldr \rt, [\rt]
+.endm
+
+.macro v7m_cacheop, rt, tmp, op, c = al
+ movw\c \tmp, #:lower16:BASEADDR_V7M_SCB + \op
+ movt\c \tmp, #:upper16:BASEADDR_V7M_SCB + \op
+ str\c \rt, [\tmp]
+.endm
+
+
+.macro read_ccsidr, rt
+ v7m_cache_read \rt, V7M_SCB_CCSIDR
+.endm
+
+.macro read_clidr, rt
+ v7m_cache_read \rt, V7M_SCB_CLIDR
+.endm
+
+.macro write_csselr, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_CSSELR
+.endm
+
+/*
+ * dcisw: Invalidate data cache by set/way
+ */
+.macro dcisw, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_DCISW
+.endm
+
+/*
+ * dccisw: Clean and invalidate data cache by set/way
+ */
+.macro dccisw, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_DCCISW
+.endm
+
+/*
+ * dccimvac: Clean and invalidate data cache line by MVA to PoC.
+ */
+.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+.macro dccimvac\c, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_DCCIMVAC, \c
+.endm
+.endr
+
+/*
+ * dcimvac: Invalidate data cache line by MVA to PoC
+ */
+.macro dcimvac, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC
+.endm
+
+/*
+ * dccmvau: Clean data cache line by MVA to PoU
+ */
+.macro dccmvau, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAU
+.endm
+
+/*
+ * dccmvac: Clean data cache line by MVA to PoC
+ */
+.macro dccmvac, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAC
+.endm
+
+/*
+ * icimvau: Invalidate instruction caches by MVA to PoU
+ */
+.macro icimvau, rt, tmp
+ v7m_cacheop \rt, \tmp, V7M_SCB_ICIMVAU
+.endm
+
+/*
+ * Invalidate the icache, inner shareable if SMP, invalidate BTB for UP.
+ * rt data ignored by ICIALLU(IS), so can be used for the address
+ */
+.macro invalidate_icache, rt
+ v7m_cacheop \rt, \rt, V7M_SCB_ICIALLU
+ mov \rt, #0
+.endm
+
+/*
+ * Invalidate the BTB, inner shareable if SMP.
+ * rt data ignored by BPIALL, so it can be used for the address
+ */
+.macro invalidate_bp, rt
+ v7m_cacheop \rt, \rt, V7M_SCB_BPIALL
+ mov \rt, #0
+.endm
+
+ENTRY(v7m_invalidate_l1)
+ mov r0, #0
+
+ write_csselr r0, r1
+ read_ccsidr r0
+
+ movw r1, #0x7fff
+ and r2, r1, r0, lsr #13
+
+ movw r1, #0x3ff
+
+ and r3, r1, r0, lsr #3 @ NumWays - 1
+ add r2, r2, #1 @ NumSets
+
+ and r0, r0, #0x7
+ add r0, r0, #4 @ SetShift
+
+ clz r1, r3 @ WayShift
+ add r4, r3, #1 @ NumWays
+1: sub r2, r2, #1 @ NumSets--
+ mov r3, r4 @ Temp = NumWays
+2: subs r3, r3, #1 @ Temp--
+ mov r5, r3, lsl r1
+ mov r6, r2, lsl r0
+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ dcisw r5, r6
+ bgt 2b
+ cmp r2, #0
+ bgt 1b
+ dsb st
+ isb
+ ret lr
+ENDPROC(v7m_invalidate_l1)
+
+/*
+ * v7m_flush_icache_all()
+ *
+ * Flush the whole I-cache.
+ *
+ * Registers:
+ * r0 - set to 0
+ */
+ENTRY(v7m_flush_icache_all)
+ invalidate_icache r0
+ ret lr
+ENDPROC(v7m_flush_icache_all)
+
+/*
+ * v7m_flush_dcache_all()
+ *
+ * Flush the whole D-cache.
+ *
+ * Corrupted registers: r0-r7, r9-r11
+ */
+ENTRY(v7m_flush_dcache_all)
+ dmb @ ensure ordering with previous memory accesses
+ read_clidr r0
+ mov r3, r0, lsr #23 @ move LoC into position
+ ands r3, r3, #7 << 1 @ extract LoC*2 from clidr
+ beq finished @ if loc is 0, then no need to clean
+start_flush_levels:
+ mov r10, #0 @ start clean at cache level 0
+flush_levels:
+ add r2, r10, r10, lsr #1 @ work out 3x current cache level
+ mov r1, r0, lsr r2 @ extract cache type bits from clidr
+ and r1, r1, #7 @ mask of the bits for current cache only
+ cmp r1, #2 @ see what cache we have at this level
+ blt skip @ skip if no cache, or just i-cache
+#ifdef CONFIG_PREEMPT
+ save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic
+#endif
+ write_csselr r10, r1 @ set current cache level
+ isb @ isb to sych the new cssr&csidr
+ read_ccsidr r1 @ read the new csidr
+#ifdef CONFIG_PREEMPT
+ restore_irqs_notrace r9
+#endif
+ and r2, r1, #7 @ extract the length of the cache lines
+ add r2, r2, #4 @ add 4 (line length offset)
+ movw r4, #0x3ff
+ ands r4, r4, r1, lsr #3 @ find maximum number on the way size
+ clz r5, r4 @ find bit position of way size increment
+ movw r7, #0x7fff
+ ands r7, r7, r1, lsr #13 @ extract max number of the index size
+loop1:
+ mov r9, r7 @ create working copy of max index
+loop2:
+ lsl r6, r4, r5
+ orr r11, r10, r6 @ factor way and cache number into r11
+ lsl r6, r9, r2
+ orr r11, r11, r6 @ factor index number into r11
+ dccisw r11, r6 @ clean/invalidate by set/way
+ subs r9, r9, #1 @ decrement the index
+ bge loop2
+ subs r4, r4, #1 @ decrement the way
+ bge loop1
+skip:
+ add r10, r10, #2 @ increment cache number
+ cmp r3, r10
+ bgt flush_levels
+finished:
+ mov r10, #0 @ swith back to cache level 0
+ write_csselr r10, r3 @ select current cache level in cssr
+ dsb st
+ isb
+ ret lr
+ENDPROC(v7m_flush_dcache_all)
+
+/*
+ * v7m_flush_cache_all()
+ *
+ * Flush the entire cache system.
+ * The data cache flush is now achieved using atomic clean / invalidates
+ * working outwards from L1 cache. This is done using Set/Way based cache
+ * maintenance instructions.
+ * The instruction cache can still be invalidated back to the point of
+ * unification in a single instruction.
+ *
+ */
+ENTRY(v7m_flush_kern_cache_all)
+ stmfd sp!, {r4-r7, r9-r11, lr}
+ bl v7m_flush_dcache_all
+ invalidate_icache r0
+ ldmfd sp!, {r4-r7, r9-r11, lr}
+ ret lr
+ENDPROC(v7m_flush_kern_cache_all)
+
+/*
+ * v7m_flush_cache_all()
+ *
+ * Flush all TLB entries in a particular address space
+ *
+ * - mm - mm_struct describing address space
+ */
+ENTRY(v7m_flush_user_cache_all)
+ /*FALLTHROUGH*/
+
+/*
+ * v7m_flush_cache_range(start, end, flags)
+ *
+ * Flush a range of TLB entries in the specified address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - flags - vm_area_struct flags describing address space
+ *
+ * It is assumed that:
+ * - we have a VIPT cache.
+ */
+ENTRY(v7m_flush_user_cache_range)
+ ret lr
+ENDPROC(v7m_flush_user_cache_all)
+ENDPROC(v7m_flush_user_cache_range)
+
+/*
+ * v7m_coherent_kern_range(start,end)
+ *
+ * Ensure that the I and D caches are coherent within specified
+ * region. This is typically used when code has been written to
+ * a memory region, and will be executed.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ *
+ * It is assumed that:
+ * - the Icache does not read data from the write buffer
+ */
+ENTRY(v7m_coherent_kern_range)
+ /* FALLTHROUGH */
+
+/*
+ * v7m_coherent_user_range(start,end)
+ *
+ * Ensure that the I and D caches are coherent within specified
+ * region. This is typically used when code has been written to
+ * a memory region, and will be executed.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ *
+ * It is assumed that:
+ * - the Icache does not read data from the write buffer
+ */
+ENTRY(v7m_coherent_user_range)
+ UNWIND(.fnstart )
+ dcache_line_size r2, r3
+ sub r3, r2, #1
+ bic r12, r0, r3
+1:
+/*
+ * We use open coded version of dccmvau otherwise USER() would
+ * point at movw instruction.
+ */
+ dccmvau r12, r3
+ add r12, r12, r2
+ cmp r12, r1
+ blo 1b
+ dsb ishst
+ icache_line_size r2, r3
+ sub r3, r2, #1
+ bic r12, r0, r3
+2:
+ icimvau r12, r3
+ add r12, r12, r2
+ cmp r12, r1
+ blo 2b
+ invalidate_bp r0
+ dsb ishst
+ isb
+ ret lr
+ UNWIND(.fnend )
+ENDPROC(v7m_coherent_kern_range)
+ENDPROC(v7m_coherent_user_range)
+
+/*
+ * v7m_flush_kern_dcache_area(void *addr, size_t size)
+ *
+ * Ensure that the data held in the page kaddr is written back
+ * to the page in question.
+ *
+ * - addr - kernel address
+ * - size - region size
+ */
+ENTRY(v7m_flush_kern_dcache_area)
+ dcache_line_size r2, r3
+ add r1, r0, r1
+ sub r3, r2, #1
+ bic r0, r0, r3
+1:
+ dccimvac r0, r3 @ clean & invalidate D line / unified line
+ add r0, r0, r2
+ cmp r0, r1
+ blo 1b
+ dsb st
+ ret lr
+ENDPROC(v7m_flush_kern_dcache_area)
+
+/*
+ * v7m_dma_inv_range(start,end)
+ *
+ * Invalidate the data cache within the specified region; we will
+ * be performing a DMA operation in this region and we want to
+ * purge old data in the cache.
+ *
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+v7m_dma_inv_range:
+ dcache_line_size r2, r3
+ sub r3, r2, #1
+ tst r0, r3
+ bic r0, r0, r3
+ dccimvacne r0, r3
+ subne r3, r2, #1 @ restore r3, corrupted by v7m's dccimvac
+ tst r1, r3
+ bic r1, r1, r3
+ dccimvacne r1, r3
+1:
+ dcimvac r0, r3
+ add r0, r0, r2
+ cmp r0, r1
+ blo 1b
+ dsb st
+ ret lr
+ENDPROC(v7m_dma_inv_range)
+
+/*
+ * v7m_dma_clean_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+v7m_dma_clean_range:
+ dcache_line_size r2, r3
+ sub r3, r2, #1
+ bic r0, r0, r3
+1:
+ dccmvac r0, r3 @ clean D / U line
+ add r0, r0, r2
+ cmp r0, r1
+ blo 1b
+ dsb st
+ ret lr
+ENDPROC(v7m_dma_clean_range)
+
+/*
+ * v7m_dma_flush_range(start,end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(v7m_dma_flush_range)
+ dcache_line_size r2, r3
+ sub r3, r2, #1
+ bic r0, r0, r3
+1:
+ dccimvac r0, r3 @ clean & invalidate D / U line
+ add r0, r0, r2
+ cmp r0, r1
+ blo 1b
+ dsb st
+ ret lr
+ENDPROC(v7m_dma_flush_range)
+
+/*
+ * dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7m_dma_map_area)
+ add r1, r1, r0
+ teq r2, #DMA_FROM_DEVICE
+ beq v7m_dma_inv_range
+ b v7m_dma_clean_range
+ENDPROC(v7m_dma_map_area)
+
+/*
+ * dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(v7m_dma_unmap_area)
+ add r1, r1, r0
+ teq r2, #DMA_TO_DEVICE
+ bne v7m_dma_inv_range
+ ret lr
+ENDPROC(v7m_dma_unmap_area)
+
+ .globl v7m_flush_kern_cache_louis
+ .equ v7m_flush_kern_cache_louis, v7m_flush_kern_cache_all
+
+ __INITDATA
+
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions v7m
@@ -7,6 +7,10 @@
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_CPU_V7M
+#include <asm/v7m.h>
+#endif
+
/*
* vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
*/
@@ -70,7 +74,13 @@
* on ARMv7.
*/
.macro dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+ movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ ldr \tmp, [\tmp]
+#else
mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+#endif
lsr \tmp, \tmp, #16
and \tmp, \tmp, #0xf @ cache line size encoding
mov \reg, #4 @ bytes per word
@@ -82,7 +92,13 @@
* on ARMv7.
*/
.macro icache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+ movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+ ldr \tmp, [\tmp]
+#else
mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+#endif
and \tmp, \tmp, #0xf @ cache line size encoding
mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
This commit implements the cache operation for V7M. It is based on V7 counterpart and differs as follows: - cache operations are memory mapped - only Thumb instruction set is supported - we don't handle user access faults Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> --- arch/arm/mm/cache-v7m.S | 453 +++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mm/proc-macros.S | 16 ++ 2 files changed, 469 insertions(+) create mode 100644 arch/arm/mm/cache-v7m.S