| Message ID | 1472045342-7434-9-git-send-email-p.zabel@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2016-08-24 22:29 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>: > Visible only if COMPILE_TEST is enabled, this allows to include the > driver in build tests. > > Cc: Moritz Fischer <moritz.fischer@ettus.com> > Cc: Michal Simek <michal.simek@xilinx.com> > Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > --- > drivers/reset/Kconfig | 6 ++++++ > drivers/reset/Makefile | 2 +- > 2 files changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig > index 17030e2..86b49a2 100644 > --- a/drivers/reset/Kconfig > +++ b/drivers/reset/Kconfig > @@ -67,6 +67,12 @@ config RESET_SUNXI > help > This enables the reset driver for Allwinner SoCs. > > +config RESET_ZYNQ > + bool "ZYNQ Reset Driver" if COMPILE_TEST > + default ARCH_ZYNQ > + help > + This enables the reset driver for Xilinx Zynq FPGAs. > + Please move this below RESET_UNIPHIER as I assume you are sorting Kconfig entries alphabetically. Otherwise, Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-08-25 2:48 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: > 2016-08-24 22:29 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>: >> Visible only if COMPILE_TEST is enabled, this allows to include the >> driver in build tests. >> >> Cc: Moritz Fischer <moritz.fischer@ettus.com> >> Cc: Michal Simek <michal.simek@xilinx.com> >> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> >> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> >> --- >> drivers/reset/Kconfig | 6 ++++++ >> drivers/reset/Makefile | 2 +- >> 2 files changed, 7 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig >> index 17030e2..86b49a2 100644 >> --- a/drivers/reset/Kconfig >> +++ b/drivers/reset/Kconfig >> @@ -67,6 +67,12 @@ config RESET_SUNXI >> help >> This enables the reset driver for Allwinner SoCs. >> >> +config RESET_ZYNQ >> + bool "ZYNQ Reset Driver" if COMPILE_TEST >> + default ARCH_ZYNQ >> + help >> + This enables the reset driver for Xilinx Zynq FPGAs. >> + > > Please move this below RESET_UNIPHIER > as I assume you are sorting Kconfig entries alphabetically. > > > Otherwise, > > Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> > >> + This enables the reset driver for Xilinx Zynq FPGAs. One more thing, I thought this statement is not precise because Zynq is not only an FPGA, but ARM SoC + FPGA. Please consider to reword "This enables the reset driver for Xilinx Zynq SoC"
Am Donnerstag, den 25.08.2016, 10:08 +0900 schrieb Masahiro Yamada: > 2016-08-25 2:48 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: > > 2016-08-24 22:29 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>: > >> Visible only if COMPILE_TEST is enabled, this allows to include the > >> driver in build tests. > >> > >> Cc: Moritz Fischer <moritz.fischer@ettus.com> > >> Cc: Michal Simek <michal.simek@xilinx.com> > >> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> > >> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > >> --- > >> drivers/reset/Kconfig | 6 ++++++ > >> drivers/reset/Makefile | 2 +- > >> 2 files changed, 7 insertions(+), 1 deletion(-) > >> > >> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig > >> index 17030e2..86b49a2 100644 > >> --- a/drivers/reset/Kconfig > >> +++ b/drivers/reset/Kconfig > >> @@ -67,6 +67,12 @@ config RESET_SUNXI > >> help > >> This enables the reset driver for Allwinner SoCs. > >> > >> +config RESET_ZYNQ > >> + bool "ZYNQ Reset Driver" if COMPILE_TEST > >> + default ARCH_ZYNQ > >> + help > >> + This enables the reset driver for Xilinx Zynq FPGAs. > >> + > > > > Please move this below RESET_UNIPHIER > > as I assume you are sorting Kconfig entries alphabetically. Yes, that was my intention. > > Otherwise, > > > > Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> > > > > > > > >> + This enables the reset driver for Xilinx Zynq FPGAs. > > > One more thing, I thought this statement is not precise > because Zynq is not only an FPGA, > but ARM SoC + FPGA. > > Please consider to reword > > "This enables the reset driver for Xilinx Zynq SoC" I'll change it to SoCs, thanks. regards Philipp
2016-08-25 16:23 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>: > Am Donnerstag, den 25.08.2016, 10:08 +0900 schrieb Masahiro Yamada: >> 2016-08-25 2:48 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: >> > 2016-08-24 22:29 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>: >> >> Visible only if COMPILE_TEST is enabled, this allows to include the >> >> driver in build tests. >> >> >> >> Cc: Moritz Fischer <moritz.fischer@ettus.com> >> >> Cc: Michal Simek <michal.simek@xilinx.com> >> >> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> >> >> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> >> >> --- >> >> drivers/reset/Kconfig | 6 ++++++ >> >> drivers/reset/Makefile | 2 +- >> >> 2 files changed, 7 insertions(+), 1 deletion(-) >> >> >> >> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig >> >> index 17030e2..86b49a2 100644 >> >> --- a/drivers/reset/Kconfig >> >> +++ b/drivers/reset/Kconfig >> >> @@ -67,6 +67,12 @@ config RESET_SUNXI >> >> help >> >> This enables the reset driver for Allwinner SoCs. >> >> >> >> +config RESET_ZYNQ >> >> + bool "ZYNQ Reset Driver" if COMPILE_TEST >> >> + default ARCH_ZYNQ >> >> + help >> >> + This enables the reset driver for Xilinx Zynq FPGAs. >> >> + >> > >> > Please move this below RESET_UNIPHIER >> > as I assume you are sorting Kconfig entries alphabetically. > > Yes, that was my intention. > >> > Otherwise, >> > >> > Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> >> > >> >> >> >> >> >> + This enables the reset driver for Xilinx Zynq FPGAs. >> >> >> One more thing, I thought this statement is not precise >> because Zynq is not only an FPGA, >> but ARM SoC + FPGA. >> >> Please consider to reword >> >> "This enables the reset driver for Xilinx Zynq SoC" > > I'll change it to SoCs, thanks. Maybe singular? As far as I know, Zynq-7000 is the only SoC of the Zynq family. I am not sure if Xilinx has plan to add more lineups to 32bit SoCs.
Am Donnerstag, den 25.08.2016, 16:31 +0900 schrieb Masahiro Yamada: > 2016-08-25 16:23 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>: > > Am Donnerstag, den 25.08.2016, 10:08 +0900 schrieb Masahiro Yamada: > >> 2016-08-25 2:48 GMT+09:00 Masahiro Yamada <yamada.masahiro@socionext.com>: > >> > 2016-08-24 22:29 GMT+09:00 Philipp Zabel <p.zabel@pengutronix.de>: > >> >> Visible only if COMPILE_TEST is enabled, this allows to include the > >> >> driver in build tests. > >> >> > >> >> Cc: Moritz Fischer <moritz.fischer@ettus.com> > >> >> Cc: Michal Simek <michal.simek@xilinx.com> > >> >> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> > >> >> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> > >> >> --- > >> >> drivers/reset/Kconfig | 6 ++++++ > >> >> drivers/reset/Makefile | 2 +- > >> >> 2 files changed, 7 insertions(+), 1 deletion(-) > >> >> > >> >> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig > >> >> index 17030e2..86b49a2 100644 > >> >> --- a/drivers/reset/Kconfig > >> >> +++ b/drivers/reset/Kconfig > >> >> @@ -67,6 +67,12 @@ config RESET_SUNXI > >> >> help > >> >> This enables the reset driver for Allwinner SoCs. > >> >> > >> >> +config RESET_ZYNQ > >> >> + bool "ZYNQ Reset Driver" if COMPILE_TEST > >> >> + default ARCH_ZYNQ > >> >> + help > >> >> + This enables the reset driver for Xilinx Zynq FPGAs. > >> >> + > >> > > >> > Please move this below RESET_UNIPHIER > >> > as I assume you are sorting Kconfig entries alphabetically. > > > > Yes, that was my intention. > > > >> > Otherwise, > >> > > >> > Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> > >> > > >> > >> > >> > >> > >> >> + This enables the reset driver for Xilinx Zynq FPGAs. > >> > >> > >> One more thing, I thought this statement is not precise > >> because Zynq is not only an FPGA, > >> but ARM SoC + FPGA. > >> > >> Please consider to reword > >> > >> "This enables the reset driver for Xilinx Zynq SoC" > > > > I'll change it to SoCs, thanks. > > Maybe singular? As far as I know, Zynq-7000 is the only SoC > of the Zynq family. > I am not sure if Xilinx has plan to add more lineups to 32bit SoCs. Zynq-7000 is a family, so plural should be okay. regards Philipp
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 17030e2..86b49a2 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -67,6 +67,12 @@ config RESET_SUNXI help This enables the reset driver for Allwinner SoCs. +config RESET_ZYNQ + bool "ZYNQ Reset Driver" if COMPILE_TEST + default ARCH_ZYNQ + help + This enables the reset driver for Xilinx Zynq FPGAs. + config TI_SYSCON_RESET tristate "TI SYSCON Reset Driver" depends on HAS_IOMEM diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 4a163c7..56f90ea 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -1,7 +1,6 @@ obj-y += core.o obj-$(CONFIG_ARCH_STI) += sti/ obj-$(CONFIG_ARCH_HISI) += hisilicon/ -obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o @@ -13,3 +12,4 @@ obj-$(CONFIG_RESET_STM32) += reset-stm32.o obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o +obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Moritz Fischer <moritz.fischer@ettus.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> --- drivers/reset/Kconfig | 6 ++++++ drivers/reset/Makefile | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-)