| Message ID | 1472383269-3126-5-git-send-email-ayaka@soulik.info (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/28/2016 01:21 PM, Randy Li wrote: > Enable the WM8960 analog audio codec on TOPEET iTop 4412 Elite board. > > Signed-off-by: Randy Li <ayaka@soulik.info> > --- > arch/arm/boot/dts/exynos4412-itop-elite.dts | 77 +++++++++++++++++++++++++++++ > 1 file changed, 77 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts > index 2d11b9a..e1cda54 100644 > --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts > +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts > @@ -15,6 +15,7 @@ > > /dts-v1/; > #include "exynos4412-itop-scp-core.dtsi" > +#include <dt-bindings/sound/samsung-i2s.h> Reverse the includes and squash the patch with #2. Best regards, Krzysztof > > / { > model = "TOPEET iTop 4412 Elite board based on Exynos4412"; > @@ -75,6 +76,54 @@ > gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; > }; > }; > + > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,name = "wm-sound"; > + > + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, > + <&clock_audss EXYNOS_MOUT_I2S>, > + <&clock_audss EXYNOS_DOUT_SRP>, > + <&clock_audss EXYNOS_DOUT_AUD_BUS>; > + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, > + <&clock_audss EXYNOS_MOUT_AUDSS>; > + assigned-clock-rates = <0>, > + <0>, > + <112896000>, > + <11289600>; > + > + simple-audio-card,format = "i2s"; > + simple-audio-card,bitclock-master = <&link0_codec>; > + simple-audio-card,frame-master = <&link0_codec>; > + > + simple-audio-card,widgets = > + "Microphone", "Mic Jack", > + "Line", "Line In", > + "Line", "Line Out", > + "Speaker", "Speaker", > + "Headphone", "Headphone Jack"; > + simple-audio-card,routing = > + "Headphone Jack", "HP_L", > + "Headphone Jack", "HP_R", > + "Speaker", "SPK_LP", > + "Speaker", "SPK_LN", > + "Speaker", "SPK_RP", > + "Speaker", "SPK_RN", > + "LINPUT1", "Mic Jack", > + "LINPUT3", "Mic Jack", > + "RINPUT1", "Mic Jack", > + "RINPUT2", "Mic Jack"; > + > + simple-audio-card,cpu { > + sound-dai = <&i2s0 0>; > + }; > + > + link0_codec: simple-audio-card,codec { > + sound-dai = <&codec>; > + clocks = <&i2s0 CLK_I2S_CDCLK>; > + system-clock-frequency = <11289600>; > + }; > + }; > > beep { > compatible = "pwm-beeper"; > @@ -143,6 +192,34 @@ > status = "okay"; > }; > > +&i2c_4 { > + samsung,i2c-sda-delay = <100>; > + samsung,i2c-slave-addr = <0x10>; > + samsung,i2c-max-bus-freq = <100000>; > + pinctrl-0 = <&i2c4_bus>; > + pinctrl-names = "default"; > + status = "okay"; > + > + codec: wm8960@1a { > + compatible = "wlf,wm8960"; > + reg = <0x1a>; > + clocks = <&pmu_system_controller 0>; > + clock-names = "MCLK1"; > + wlf,shared-lrclk; > + #sound-dai-cells = <0>; > + }; > +}; > + > +&i2s0 { > + pinctrl-0 = <&i2s0_bus>; > + pinctrl-names = "default"; > + status = "okay"; > + clocks = <&clock_audss EXYNOS_I2S_BUS>, > + <&clock_audss EXYNOS_DOUT_AUD_BUS>, > + <&clock_audss EXYNOS_SCLK_I2S>; > + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; > +}; > + > &pwm { > pinctrl-0 = <&pwm1_out>; > pinctrl-names = "default"; >
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index 2d11b9a..e1cda54 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -15,6 +15,7 @@ /dts-v1/; #include "exynos4412-itop-scp-core.dtsi" +#include <dt-bindings/sound/samsung-i2s.h> / { model = "TOPEET iTop 4412 Elite board based on Exynos4412"; @@ -75,6 +76,54 @@ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm-sound"; + + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <112896000>, + <11289600>; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "Speaker", "SPK_RP", + "Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + system-clock-frequency = <11289600>; + }; + }; beep { compatible = "pwm-beeper"; @@ -143,6 +192,34 @@ status = "okay"; }; +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + codec: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + wlf,shared-lrclk; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; +}; + &pwm { pinctrl-0 = <&pwm1_out>; pinctrl-names = "default";
Enable the WM8960 analog audio codec on TOPEET iTop 4412 Elite board. Signed-off-by: Randy Li <ayaka@soulik.info> --- arch/arm/boot/dts/exynos4412-itop-elite.dts | 77 +++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)