diff mbox

[3/3] arm64: dts: marvell: enable MSI for PCIe on Armada 7K/8K

Message ID 1472561830-20932-4-git-send-email-thomas.petazzoni@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Thomas Petazzoni Aug. 30, 2016, 12:57 p.m. UTC 
This commit adds a reference to the appropriate MSI controller in the
description of the PCIe controllers on Marvel Armada 7K and 8K
platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Please only apply once the DT binding and the driver change have been
accepted.

 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 +++
 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 3 +++
 2 files changed, 6 insertions(+)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index ceb83b0..ff469e1 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -177,6 +177,7 @@ 
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -202,6 +203,7 @@ 
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -228,6 +230,7 @@ 
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2d863f2..43cecf0 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -177,6 +177,7 @@ 
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -202,6 +203,7 @@ 
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -228,6 +230,7 @@ 
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =