| Message ID | 1472774002-25986-1-git-send-email-dianders@chromium.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Donnerstag, 1. September 2016, 16:53:22 schrieb Douglas Anderson: > On some rk3399 boards GPIO0_A0 is hooked up to a 32 kHz clock. This can > be used as the source for various clocks in the system. > > Add a pinmux so boards can get this pin properly configured. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> applied to my dts64 branch for 4.9 Thanks Heiko
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 62d450935a57..13e2a440fe43 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1171,6 +1171,12 @@ drive-strength = <13>; }; + clock { + clk_32k: clk-32k { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins =
On some rk3399 boards GPIO0_A0 is hooked up to a 32 kHz clock. This can be used as the source for various clocks in the system. Add a pinmux so boards can get this pin properly configured. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)