| Message ID | 1472978067-868-1-git-send-email-andy.yan@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Sonntag, 4. September 2016, 16:34:27 CEST schrieb Andy Yan: > The i2c address of the three-axis digital gyroscope L3G4200D should be > 0x69 according to hardware design. > Also add power supply reference for L3G3200D and the 3-axis Electronic > Compass AK8963. > > Signed-off-by: Andy Yan <andy.yan@rock-chips.com> I've split this into two patches: ARM: dts: rockchip: fix L3G4200D i2c address on PopMetal-RK3288 board ARM: dts: rockchip: Add sensor-supplies on PopMetal-RK3288 board and applied them to my dts32 branch for 4.9 Please don't mix multiple changes into one patch in the future :-) Thanks Heiko
Hi Heiko: On 2016年09月05日 17:12, Heiko Stuebner wrote: > Am Sonntag, 4. September 2016, 16:34:27 CEST schrieb Andy Yan: >> The i2c address of the three-axis digital gyroscope L3G4200D should be >> 0x69 according to hardware design. >> Also add power supply reference for L3G3200D and the 3-axis Electronic >> Compass AK8963. >> >> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> > I've split this into two patches: > ARM: dts: rockchip: fix L3G4200D i2c address on PopMetal-RK3288 board > ARM: dts: rockchip: Add sensor-supplies on PopMetal-RK3288 board > and applied them to my dts32 branch for 4.9 > > Please don't mix multiple changes into one patch in the future :-) > Thanks, I'll keep this in mind. > Thanks > Heiko > > >
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 802216f..706c67c 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -391,12 +391,16 @@ interrupts = <1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; + vdd-supply = <&vcc_io>; + vid-supply = <&vcc_io>; }; - l3g4200d: l3g4200d@68 { + l3g4200d: l3g4200d@69 { compatible = "st,l3g4200d-gyro"; st,drdy-int-pin = <2>; - reg = <0x6b>; + reg = <0x69>; + vdd-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; }; mma8452: mma8452@1d {
The i2c address of the three-axis digital gyroscope L3G4200D should be 0x69 according to hardware design. Also add power supply reference for L3G3200D and the 3-axis Electronic Compass AK8963. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> --- arch/arm/boot/dts/rk3288-popmetal.dts | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)