[V6,1/6] dt: bindings: add thermal device driver for bcm2835

Commit Message

Martin Sperl Sept. 19, 2016, 8:59 a.m. UTC

From: Martin Sperl <[e-mail]>

Add dt-binding documentation for bcm2835 SOC thermal sensor.

Signed-off-by: Martin Sperl <[e-mail]>
Acked-by: Eric Anholt <[e-mail]>
Acked-by: Rob Herring <[e-mail]>

Changelog:
 V1 -> V2: renamed file to follow naming conventions
 V2 -> V3: removed 0x in node name
---
 .../bindings/thermal/brcm,bcm2835-thermal.txt           | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt

Patch

diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
new file mode 100644
index 0000000..474531d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
@@ -0,0 +1,17 @@ 
+Binding for Thermal Sensor driver for BCM2835 SoCs.
+
+Required parameters:
+-------------------
+
+compatible: 	should be one of: "brcm,bcm2835-thermal",
+		"brcm,bcm2836-thermal" or "brcm,bcm2837-thermal"
+reg:		Address range of the thermal registers.
+clocks: 	Phandle of the clock used by the thermal sensor.
+
+Example:
+
+thermal: thermal@7e212000 {
+	compatible = "brcm,bcm2835-thermal";
+	reg = <0x7e212000 0x8>;
+	clocks = <&clocks BCM2835_CLOCK_TSENS>;
+};