@@ -19,6 +19,7 @@
#include <linux/of_mdio.h>
#include <linux/phy.h>
#include <linux/iopoll.h>
+#include <linux/acpi.h>
#include "emac.h"
#include "emac-mac.h"
#include "emac-phy.h"
@@ -167,7 +168,6 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
{
struct device_node *np = pdev->dev.of_node;
- struct device_node *phy_np;
struct mii_bus *mii_bus;
int ret;
@@ -183,14 +183,37 @@ int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
mii_bus->parent = &pdev->dev;
mii_bus->priv = adpt;
- ret = of_mdiobus_register(mii_bus, np);
- if (ret) {
- dev_err(&pdev->dev, "could not register mdio bus\n");
- return ret;
+ if (has_acpi_companion(&pdev->dev)) {
+ u32 phy_addr;
+
+ ret = mdiobus_register(mii_bus);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register mdio bus\n");
+ return ret;
+ }
+ ret = device_property_read_u32(&pdev->dev, "phy-channel",
+ &phy_addr);
+ if (ret)
+ /* If we can't read a valid phy address, then assume
+ * that there is only one phy on this mdio bus.
+ */
+ adpt->phydev = phy_find_first(mii_bus);
+ else
+ adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr);
+
+ } else {
+ struct device_node *phy_np;
+
+ ret = of_mdiobus_register(mii_bus, np);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register mdio bus\n");
+ return ret;
+ }
+
+ phy_np = of_parse_phandle(np, "phy-handle", 0);
+ adpt->phydev = of_phy_find_device(phy_np);
}
- phy_np = of_parse_phandle(np, "phy-handle", 0);
- adpt->phydev = of_phy_find_device(phy_np);
if (!adpt->phydev) {
dev_err(&pdev->dev, "could not find external phy\n");
mdiobus_unregister(mii_bus);
@@ -14,6 +14,7 @@
*/
#include <linux/iopoll.h>
+#include <linux/acpi.h>
#include <linux/of_device.h>
#include "emac.h"
#include "emac-mac.h"
@@ -662,6 +663,24 @@ void emac_sgmii_reset(struct emac_adapter *adpt)
clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000);
}
+static int emac_sgmii_acpi_match(struct device *dev, void *data)
+{
+ static const struct acpi_device_id match_table[] = {
+ {
+ .id = "QCOM8071",
+ .driver_data = (kernel_ulong_t)emac_sgmii_init_v2,
+ },
+ {}
+ };
+ const struct acpi_device_id *id = acpi_match_device(match_table, dev);
+ emac_sgmii_initialize *initialize = data;
+
+ if (id)
+ *initialize = (emac_sgmii_initialize)id->driver_data;
+
+ return !!id;
+}
+
static const struct of_device_id emac_sgmii_dt_match[] = {
{
.compatible = "qcom,fsm9900-emac-sgmii",
@@ -679,30 +698,45 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
struct platform_device *sgmii_pdev = NULL;
struct emac_phy *phy = &adpt->phy;
struct resource *res;
- const struct of_device_id *match;
- struct device_node *np;
int ret;
- np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0);
- if (!np) {
- dev_err(&pdev->dev, "missing internal-phy property\n");
- return -ENODEV;
- }
+ if (has_acpi_companion(&pdev->dev)) {
+ struct device *dev;
- sgmii_pdev = of_find_device_by_node(np);
- if (!sgmii_pdev) {
- dev_err(&pdev->dev, "invalid internal-phy property\n");
- return -ENODEV;
- }
+ dev = device_find_child(&pdev->dev, &phy->initialize,
+ emac_sgmii_acpi_match);
- match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev);
- if (!match) {
- dev_err(&pdev->dev, "unrecognized internal phy node\n");
- ret = -ENODEV;
- goto error_put_device;
- }
+ if (!dev) {
+ dev_err(&pdev->dev, "cannot find internal phy node\n");
+ return -ENODEV;
+ }
- phy->initialize = (emac_sgmii_initialize)match->data;
+ sgmii_pdev = to_platform_device(dev);
+ } else {
+ const struct of_device_id *match;
+ struct device_node *np;
+
+ np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0);
+ if (!np) {
+ dev_err(&pdev->dev, "missing internal-phy property\n");
+ return -ENODEV;
+ }
+
+ sgmii_pdev = of_find_device_by_node(np);
+ if (!sgmii_pdev) {
+ dev_err(&pdev->dev, "invalid internal-phy property\n");
+ return -ENODEV;
+ }
+
+ match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "unrecognized internal phy node\n");
+ ret = -ENODEV;
+ goto error_put_device;
+ }
+
+ phy->initialize = (emac_sgmii_initialize)match->data;
+ }
/* Base address is the first address */
res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0);
@@ -22,6 +22,7 @@
#include <linux/of_device.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/acpi.h>
#include "emac.h"
#include "emac-mac.h"
#include "emac-phy.h"
@@ -575,6 +576,16 @@ static const struct of_device_id emac_dt_match[] = {
{}
};
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id emac_acpi_match[] = {
+ {
+ .id = "QCOM8070",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, emac_acpi_match);
+#endif
+
static int emac_probe(struct platform_device *pdev)
{
struct net_device *netdev;
@@ -734,6 +745,7 @@ static struct platform_driver emac_platform_driver = {
.driver = {
.name = "qcom-emac",
.of_match_table = emac_dt_match,
+ .acpi_match_table = ACPI_PTR(emac_acpi_match),
},
};
Add support for reading addresses, interrupts, and _DSD properties from ACPI tables, just like with device tree. The HID for the EMAC device itself is QCOM8070. The internal PHY is represented by a child node with a HID of QCOM8071. The EMAC also has some complex clock initialization requirements that are not represented by this patch. This will be addressed in a future patch. Signed-off-by: Timur Tabi <timur@codeaurora.org> --- drivers/net/ethernet/qualcomm/emac/emac-phy.c | 37 ++++++++++--- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 72 ++++++++++++++++++------- drivers/net/ethernet/qualcomm/emac/emac.c | 12 +++++ 3 files changed, 95 insertions(+), 26 deletions(-)