@@ -29,6 +29,16 @@ Optional properties:
specified by this binding. More details about power domain specifier are
available in the next section.
+- domain-idle-states : A phandle of an idle-state that shall be soaked into a
+ generic domain power state. The idle state definitions must be
+ compatible with "domain-idle-state" as well as
+ "arm,idle-state" as defined in [1].
+ The domain-idle-state property reflects the idle state of this PM domain and
+ not the idle states of the devices or sub-domains in the PM domain. Devices
+ and sub-domains have their own idle-states independent of the parent
+ domain's idle states. In the absence of this property, the domain would be
+ considered as capable of being powered-on or powered-off.
+
Example:
power: power-controller@12340000 {
@@ -59,6 +69,38 @@ The nodes above define two power controllers: 'parent' and 'child'.
Domains created by the 'child' power controller are subdomains of '0' power
domain provided by the 'parent' power controller.
+Example 3:
+ parent: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <0>;
+ domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
+ };
+
+ child: power-controller@12341000 {
+ compatible = "foo,power-controller";
+ reg = <0x12341000 0x1000>;
+ power-domains = <&parent 0>;
+ #power-domain-cells = <0>;
+ domain-idle-states = <&DOMAIN_PWR_DN>;
+ };
+
+ DOMAIN_RET: state@0 {
+ compatible = "domain-idle-state", "arm,idle-state";
+ reg = <0x0>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <10000>;
+ };
+
+ DOMAIN_PWR_DN: state@1 {
+ compatible = "domain-idle-state", "arm,idle-state";
+ reg = <0x1>;
+ entry-latency-us = <5000>;
+ exit-latency-us = <8000>;
+ min-residency-us = <7000>;
+ };
+
==PM domain consumers==
Required properties:
@@ -76,3 +118,5 @@ Example:
The node above defines a typical PM domain consumer device, which is located
inside a PM domain with index 0 of a power controller represented by a node
with the label "power".
+
+[1]. Documentation/devicetree/bindings/arm/idle-states.txt