@@ -586,6 +586,10 @@ static __init void da830_evm_init(void)
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
+ ret = da8xx_register_cfgchip();
+ if (ret)
+ pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
ret = da830_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -1345,6 +1345,10 @@ static __init void da850_evm_init(void)
{
int ret;
+ ret = da8xx_register_cfgchip();
+ if (ret)
+ pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -514,6 +514,10 @@ static void __init mityomapl138_init(void)
{
int ret;
+ ret = da8xx_register_cfgchip();
+ if (ret)
+ pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
@@ -294,6 +294,10 @@ static __init void omapl138_hawk_init(void)
{
int ret;
+ ret = da8xx_register_cfgchip();
+ if (ret)
+ pr_warn("%s: CFGCHIP registration failed: %d\n", __func__, ret);
+
ret = da850_register_gpio();
if (ret)
pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
@@ -11,6 +11,7 @@
* (at your option) any later version.
*/
#include <linux/init.h>
+#include <linux/platform_data/syscon.h>
#include <linux/platform_device.h>
#include <linux/dma-contiguous.h>
#include <linux/serial_8250.h>
@@ -1089,3 +1090,30 @@ int __init da850_register_sata(unsigned long refclkpn)
return platform_device_register(&da850_sata_device);
}
#endif
+
+static struct syscon_platform_data da8xx_cfgchip_platform_data = {
+ .label = "cfgchip",
+};
+
+static struct resource da8xx_cfgchip_resources[] = {
+ {
+ .start = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP0_REG,
+ .end = DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP4_REG + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da8xx_cfgchip_device = {
+ .name = "syscon",
+ .id = -1,
+ .dev = {
+ .platform_data = &da8xx_cfgchip_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(da8xx_cfgchip_resources),
+ .resource = da8xx_cfgchip_resources,
+};
+
+int __init da8xx_register_cfgchip(void)
+{
+ return platform_device_register(&da8xx_cfgchip_device);
+}
@@ -61,6 +61,7 @@ extern unsigned int da850_max_speed;
#define DA8XX_CFGCHIP1_REG 0x180
#define DA8XX_CFGCHIP2_REG 0x184
#define DA8XX_CFGCHIP3_REG 0x188
+#define DA8XX_CFGCHIP4_REG 0x18c
#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
@@ -116,6 +117,7 @@ void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
int da850_register_gpio(void);
int da830_register_gpio(void);
+int da8xx_register_cfgchip(void);
extern struct platform_device da8xx_serial_device[];
extern struct emac_platform_data da8xx_emac_pdata;
The CFGCHIP registers are used by a number of devices, so using a syscon device to share them. The first consumer of this will by the phy-da8xx-usb driver. Signed-off-by: David Lechner <david@lechnology.com> --- syscon device id is changed to -1 since there is only one syscon device. arch/arm/mach-davinci/board-da830-evm.c | 4 ++++ arch/arm/mach-davinci/board-da850-evm.c | 4 ++++ arch/arm/mach-davinci/board-mityomapl138.c | 4 ++++ arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ++++ arch/arm/mach-davinci/devices-da8xx.c | 28 ++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/da8xx.h | 2 ++ 6 files changed, 46 insertions(+)