diff mbox

[2/2] arm64: dts: updated sata node on ls1046a dts

Message ID 1479369560-9188-2-git-send-email-yuantian.tang@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

tang yuantian Nov. 17, 2016, 7:59 a.m. UTC 
From: Tang Yuantian <Yuantian.Tang@nxp.com>

On ls1046a soc, sata ecc should be disabled. So added sata ecc
register address so that driver can get this information.

Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Shawn Guo Dec. 30, 2016, 2:36 a.m. UTC | #1 
On Thu, Nov 17, 2016 at 03:59:20PM +0800, yuantian.tang@nxp.com wrote:
> From: Tang Yuantian <Yuantian.Tang@nxp.com>
> 
> On ls1046a soc, sata ecc should be disabled. So added sata ecc

disabled or enabled?

Shawn

> register address so that driver can get this information.
> 
> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index 38806ca..88aaaf1 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -507,7 +507,9 @@
>  
>  		sata: sata@3200000 {
>  			compatible = "fsl,ls1046a-ahci";
> -			reg = <0x0 0x3200000 0x0 0x10000>;
> +			reg = <0x0 0x3200000 0x0 0x10000>,
> +			    <0x0 0x20140520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
>  			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen 4 1>;
>  		};
> -- 
> 2.1.0.27.g96db324
>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 38806ca..88aaaf1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -507,7 +507,9 @@ 
 
 		sata: sata@3200000 {
 			compatible = "fsl,ls1046a-ahci";
-			reg = <0x0 0x3200000 0x0 0x10000>;
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			    <0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
 			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
 		};