Message ID | 1480326409-25419-5-git-send-email-jbrunet@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Am 28.11.2016 um 10:46 schrieb Jerome Brunet: > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > index e6e3491d48a5..5624714d2b16 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > @@ -46,6 +46,7 @@ > > #include "meson-gxbb.dtsi" > #include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/net/mdio.h> > > / { > compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; > @@ -98,3 +99,18 @@ > pinctrl-0 = <&i2c_a_pins>; > pinctrl-names = "default"; > }; > + > +ðmac { > + phy-handle = <ð_phy0>; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + eth_phy0: ethernet-phy@0 { > + reg = <0>; > + eee-broken-modes = <MDIO_EEE_1000T>; > + }; > + }; > +}; I've tested this hand-applied because it applies to neither amlogic v4.10/integ nor linux-next.git and will conflict if applied through the net-next tree. Note that there already is an ðmac node that you should be extending rather than duplicating: ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; }; If you or your colleagues could please fix the sort order of the nodes to be alphabetical again (ethmac after i2c_A here; between uart_A and ir in-tree) this wouldn't happen so easily again. I therefore suggest to not apply this patch 4/4 through net-next but through the amlogic tree instead. Thanks, Andreas
On Mon, 2016-11-28 at 13:31 +0100, Andreas Färber wrote: > Am 28.11.2016 um 10:46 schrieb Jerome Brunet: > > > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > > --- > > arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 16 > > ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > > b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > > index e6e3491d48a5..5624714d2b16 100644 > > --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > > +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts > > @@ -46,6 +46,7 @@ > > > > #include "meson-gxbb.dtsi" > > #include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/net/mdio.h> > > > > / { > > compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; > > @@ -98,3 +99,18 @@ > > pinctrl-0 = <&i2c_a_pins>; > > pinctrl-names = "default"; > > }; > > + > > +ðmac { > > + phy-handle = <ð_phy0>; > > + > > + mdio { > > + compatible = "snps,dwmac-mdio"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + eth_phy0: ethernet-phy@0 { > > + reg = <0>; > > + eee-broken-modes = <MDIO_EEE_1000T>; > > + }; > > + }; > > +}; > 6I've tested this hand-applied because it applies to neither amlogic > v4.10/integ nor linux-next.git and will conflict if applied through > the > net-next tree. I've rebased on net-next this morning. I just checked again and now there is a conflict indeed. Something got applied between in the last 6 ours which conflict with patch 4. > > Note that there already is an ðmac node that you should be > extending > rather than duplicating: > > ðmac { > status = "okay"; > pinctrl-0 = <ð_rgmii_pins>; > pinctrl-names = "default"; > }; > > If you or your colleagues could please fix the sort order of the > nodes > to be alphabetical again (ethmac after i2c_A here; between uart_A and > ir > in-tree) this wouldn't happen so easily again. OK > > I therefore suggest to not apply this patch 4/4 through net-next but > through the amlogic tree instead. Agreed. The change is provided here so people can test. If the other patches get accepted, I'll submit the dts change through the amlogic tree. > > Thanks, > Andreas >
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index e6e3491d48a5..5624714d2b16 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -46,6 +46,7 @@ #include "meson-gxbb.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/mdio.h> / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; @@ -98,3 +99,18 @@ pinctrl-0 = <&i2c_a_pins>; pinctrl-names = "default"; }; + +ðmac { + phy-handle = <ð_phy0>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + eee-broken-modes = <MDIO_EEE_1000T>; + }; + }; +};
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)