| Message ID | 1480626020-20031-3-git-send-email-boris.brezillon@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12/01, Boris Brezillon wrote: > The VEC clock requires needs to be set at exactly 108MHz. Allow rate > change propagation on PLLH_AUX to match this requirement wihtout > impacting other IPs (PLLH is currently only used by the HDMI encoder, > which cannot be enabled when the VEC encoder is enabled). > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > --- Applied to clk-next
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index df96fe6dadab..eaf82f49dede 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -1861,7 +1861,12 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .ctl_reg = CM_VECCTL, .div_reg = CM_VECDIV, .int_bits = 4, - .frac_bits = 0), + .frac_bits = 0, + /* + * Allow rate change propagation only on PLLH_AUX which is + * assigned index 7 in the parent array. + */ + .set_rate_parent = BIT(7)), /* dsi clocks */ [BCM2835_CLOCK_DSI0E] = REGISTER_PER_CLK(
The VEC clock requires needs to be set at exactly 108MHz. Allow rate change propagation on PLLH_AUX to match this requirement wihtout impacting other IPs (PLLH is currently only used by the HDMI encoder, which cannot be enabled when the VEC encoder is enabled). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/clk/bcm/clk-bcm2835.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)