@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
-dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb
dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
always := $(dtb-y)
new file mode 100644
@@ -0,0 +1,191 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+ model = "Broadcom NS2 XMC";
+ compatible = "brcm,ns2-xmc", "brcm,ns2";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x66130000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x000000000 0x80000000 0x00000001 0x00000000>;
+ };
+};
+
+&enet {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&mdio_mux_iproc {
+ mdio@10 {
+ gphy0: eth-phy@10 {
+ reg = <0x10>;
+ };
+ };
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <16>;
+ brcm,nand-oob-sector-size = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00280000>; /* 2.5MB */
+ read-only;
+ };
+
+ partition@280000 {
+ label = "nenv";
+ reg = <0x00280000 0x00040000>; /* 0.25MB */
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "ndtb";
+ reg = <0x002c0000 0x00040000>; /* 0.25MB */
+ read-only;
+ };
+
+ partition@300000 {
+ label = "nsystem";
+ reg = <0x00300000 0x03d00000>; /* 61MB */
+ read-only;
+ };
+
+ partition@4000000 {
+ label = "nrootfs";
+ reg = <0x04000000 0x06400000>; /* 100MB */
+ };
+
+ partition@0a400000{
+ label = "ncustfs";
+ reg = <0x0a400000 0x35c00000>; /* 860MB */
+ };
+ };
+};
+
+&pci_phy0 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&pcie8 {
+ status = "ok";
+};
+
+&sata_phy0 {
+ status = "ok";
+};
+
+&sata_phy1 {
+ status = "ok";
+};
+
+&sata {
+ status = "ok";
+};
+
+&qspi {
+ flash: m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p80";
+ spi-max-frequency = <62500000>;
+ m25p,default-addr-width = <3>;
+ reg = <0x0 0x0>;
+
+ partition@0 {
+ label = "bl0";
+ reg = <0x00000000 0x00080000>; /* 512KB */
+ };
+
+ partition@80000 {
+ label = "fip";
+ reg = <0x00080000 0x00150000>; /* 1344KB */
+ };
+
+ partition@1e0000 {
+ label = "env";
+ reg = <0x001e0000 0x00010000>;/* 64KB */
+ };
+
+ partition@1f0000 {
+ label = "dtb";
+ reg = <0x001f0000 0x00010000>; /* 64KB */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x00200000 0x00e00000>; /* 14MB */
+ };
+
+ partition@1000000 {
+ label = "rootfs";
+ reg = <0x01000000 0x01000000>; /* 16MB */
+ };
+ };
+};
+
+&uart3 {
+ status = "ok";
+};
The BCM958712DxXMC board is a smaller form factor typically used as controller boards for switches. This smaller board has less devices pinned out, so only a few need be populated in the device tree. Signed-off-by: Jon Mason <jon.mason@broadcom.com> --- arch/arm64/boot/dts/broadcom/Makefile | 2 +- arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 191 +++++++++++++++++++++++++++++++ 2 files changed, 192 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/broadcom/ns2-xmc.dts