@@ -50,9 +50,11 @@
#define MVPP2_SNOOP_PKT_SIZE_MASK 0x1ff
#define MVPP2_SNOOP_BUF_HDR_MASK BIT(9)
#define MVPP2_RXQ_POOL_SHORT_OFFS 20
-#define MVPP2_RXQ_POOL_SHORT_MASK 0x700000
+#define MVPP21_RXQ_POOL_SHORT_MASK 0x700000
+#define MVPP22_RXQ_POOL_SHORT_MASK 0xf00000
#define MVPP2_RXQ_POOL_LONG_OFFS 24
-#define MVPP2_RXQ_POOL_LONG_MASK 0x7000000
+#define MVPP21_RXQ_POOL_LONG_MASK 0x7000000
+#define MVPP22_RXQ_POOL_LONG_MASK 0xf000000
#define MVPP2_RXQ_PACKET_OFFSET_OFFS 28
#define MVPP2_RXQ_PACKET_OFFSET_MASK 0x70000000
#define MVPP2_RXQ_DISABLE_MASK BIT(31)
@@ -3762,17 +3764,20 @@ static int mvpp2_bm_init(struct platform_device *pdev, struct mvpp2 *priv)
static void mvpp2_rxq_long_pool_set(struct mvpp2_port *port,
int lrxq, int long_pool)
{
- u32 val;
+ u32 val, mask;
int prxq;
/* Get queue physical ID */
prxq = port->rxqs[lrxq]->id;
- val = mvpp2_read(port->priv, MVPP2_RXQ_CONFIG_REG(prxq));
- val &= ~MVPP2_RXQ_POOL_LONG_MASK;
- val |= ((long_pool << MVPP2_RXQ_POOL_LONG_OFFS) &
- MVPP2_RXQ_POOL_LONG_MASK);
+ if (port->priv->hw_version == MVPP21)
+ mask = MVPP21_RXQ_POOL_LONG_MASK;
+ else
+ mask = MVPP22_RXQ_POOL_LONG_MASK;
+ val = mvpp2_read(port->priv, MVPP2_RXQ_CONFIG_REG(prxq));
+ val &= ~mask;
+ val |= (long_pool << MVPP2_RXQ_POOL_LONG_OFFS) & mask;
mvpp2_write(port->priv, MVPP2_RXQ_CONFIG_REG(prxq), val);
}
@@ -3780,17 +3785,20 @@ static void mvpp2_rxq_long_pool_set(struct mvpp2_port *port,
static void mvpp2_rxq_short_pool_set(struct mvpp2_port *port,
int lrxq, int short_pool)
{
- u32 val;
+ u32 val, mask;
int prxq;
/* Get queue physical ID */
prxq = port->rxqs[lrxq]->id;
- val = mvpp2_read(port->priv, MVPP2_RXQ_CONFIG_REG(prxq));
- val &= ~MVPP2_RXQ_POOL_SHORT_MASK;
- val |= ((short_pool << MVPP2_RXQ_POOL_SHORT_OFFS) &
- MVPP2_RXQ_POOL_SHORT_MASK);
+ if (port->priv->hw_version == MVPP21)
+ mask = MVPP21_RXQ_POOL_SHORT_MASK;
+ else
+ mask = MVPP22_RXQ_POOL_SHORT_MASK;
+ val = mvpp2_read(port->priv, MVPP2_RXQ_CONFIG_REG(prxq));
+ val &= ~mask;
+ val |= (short_pool << MVPP2_RXQ_POOL_SHORT_OFFS) & mask;
mvpp2_write(port->priv, MVPP2_RXQ_CONFIG_REG(prxq), val);
}
The MVPP2_RXQ_CONFIG_REG register has a slightly different layout between PPv2.1 and PPv2.2, so this commit adapts the functions modifying this register to accommodate for both the PPv2.1 and PPv2.2 cases. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- drivers/net/ethernet/marvell/mvpp2.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-)