@@ -29,6 +29,7 @@
#define PLL_MODE_SLOW 0x0
#define PLL_MODE_NORM 0x1
#define PLL_MODE_DEEP 0x2
+#define PLL_RK3328_MODE_MASK 0x1
struct rockchip_clk_pll {
struct clk_hw hw;
@@ -848,7 +849,8 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
struct clk *pll_clk, *mux_clk;
char pll_name[20];
- if (num_parents != 2) {
+ if ((pll_type != pll_rk3328 && num_parents != 2) ||
+ (pll_type == pll_rk3328 && num_parents != 1)) {
pr_err("%s: needs two parent clocks\n", __func__);
return ERR_PTR(-EINVAL);
}
@@ -865,13 +867,17 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
pll_mux = &pll->pll_mux;
pll_mux->reg = ctx->reg_base + mode_offset;
pll_mux->shift = mode_shift;
- pll_mux->mask = PLL_MODE_MASK;
+ if (pll_type == pll_rk3328)
+ pll_mux->mask = PLL_RK3328_MODE_MASK;
+ else
+ pll_mux->mask = PLL_MODE_MASK;
pll_mux->flags = 0;
pll_mux->lock = &ctx->lock;
pll_mux->hw.init = &init;
if (pll_type == pll_rk3036 ||
pll_type == pll_rk3066 ||
+ pll_type == pll_rk3328 ||
pll_type == pll_rk3399)
pll_mux->flags |= CLK_MUX_HIWORD_MASK;
@@ -884,7 +890,10 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
init.flags = CLK_SET_RATE_PARENT;
init.ops = pll->pll_mux_ops;
init.parent_names = pll_parents;
- init.num_parents = ARRAY_SIZE(pll_parents);
+ if (pll_type == pll_rk3328)
+ init.num_parents = 2;
+ else
+ init.num_parents = ARRAY_SIZE(pll_parents);
mux_clk = clk_register(NULL, &pll_mux->hw);
if (IS_ERR(mux_clk))
@@ -918,6 +927,7 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
switch (pll_type) {
case pll_rk3036:
+ case pll_rk3328:
if (!pll->rate_table || IS_ERR(ctx->grf))
init.ops = &rockchip_rk3036_pll_clk_norate_ops;
else
@@ -130,6 +130,7 @@
enum rockchip_pll_type {
pll_rk3036,
pll_rk3066,
+ pll_rk3328,
pll_rk3399,
};
The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Changes in v4: adjust the pacth 3 and 4 order. move pll_rk3328 to patch 3. Changes in v3: fix up the pll type pll_rk3328 description and use Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> --- drivers/clk/rockchip/clk-pll.c | 16 +++++++++++++--- drivers/clk/rockchip/clk.h | 1 + 2 files changed, 14 insertions(+), 3 deletions(-)