diff mbox

[PATCHv3,RESEND,4/8] ARM: dts: stm32: Add RTC support for STM32F429 MCU

Message ID 1484573388-590-2-git-send-email-amelie.delaunay@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Amelie Delaunay Jan. 16, 2017, 1:29 p.m. UTC 
This patch adds STM32 RTC bindings for STM32F429.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 arch/arm/boot/dts/stm32f429.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Alexandre TORGUE Jan. 16, 2017, 2:39 p.m. UTC | #1 
On 01/16/2017 02:29 PM, Amelie Delaunay wrote:
> This patch adds STM32 RTC bindings for STM32F429.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> ---
>  arch/arm/boot/dts/stm32f429.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
> index 557c1f4..f05a9d9 100644
> --- a/arch/arm/boot/dts/stm32f429.dtsi
> +++ b/arch/arm/boot/dts/stm32f429.dtsi
> @@ -125,6 +125,20 @@
>  			status = "disabled";
>  		};
>
> +		rtc: rtc@40002800 {
> +			compatible = "st,stm32-rtc";
> +			reg = <0x40002800 0x400>;
> +			clocks = <&rcc 1 CLK_RTC>;
> +			clock-names = "ck_rtc";
> +			assigned-clocks = <&rcc 1 CLK_RTC>;
> +			assigned-clock-parents = <&rcc 1 CLK_LSE>;
> +			interrupt-parent = <&exti>;
> +			interrupts = <17 1>;
> +			interrupt-names = "alarm";
> +			st,syscfg = <&pwrcfg>;
> +			status = "disabled";
> +		};
> +
>  		usart2: serial@40004400 {
>  			compatible = "st,stm32-usart", "st,stm32-uart";
>  			reg = <0x40004400 0x400>;
>
Applied on stm32-dt-for-v4.11

Thanks
Alex
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 557c1f4..f05a9d9 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -125,6 +125,20 @@ 
 			status = "disabled";
 		};
 
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			clock-names = "ck_rtc";
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			interrupt-names = "alarm";
+			st,syscfg = <&pwrcfg>;
+			status = "disabled";
+		};
+
 		usart2: serial@40004400 {
 			compatible = "st,stm32-usart", "st,stm32-uart";
 			reg = <0x40004400 0x400>;