| Message ID | 1484721173-30474-2-git-send-email-pankaj.dubey@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
HI, On Wed, Jan 18, 2017 at 3:32 PM, Pankaj Dubey <pankaj.dubey@samsung.com> wrote: > From: Vivek Gautam <gautamvivek1987@gmail.com> > > Add USB 3.0 DRD controller device node, with its clock > and phy information to enable the same on Exynos7. > > Signed-off-by: Vivek Gautam <gautamvivek1987@gmail.com> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- Looks good. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> > arch/arm64/boot/dts/exynos/exynos7.dtsi | 34 +++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi > index 80aa60e..9a3fbed 100644 > --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi > +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi > @@ -603,6 +603,40 @@ > #include "exynos7-trip-points.dtsi" > }; > }; > + > + usbdrd_phy: phy@15500000 { > + compatible = "samsung,exynos7-usbdrd-phy"; > + reg = <0x15500000 0x100>; > + clocks = <&clock_fsys0 ACLK_USBDRD300>, > + <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, > + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, > + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, > + <&clock_fsys0 SCLK_USBDRD300_REFCLK>; > + clock-names = "phy", "ref", "phy_pipe", > + "phy_utmi", "itp"; > + samsung,pmu-syscon = <&pmu_system_controller>; > + #phy-cells = <1>; > + }; > + > + usbdrd3 { > + compatible = "samsung,exynos7-dwusb3"; > + clocks = <&clock_fsys0 ACLK_USBDRD300>, > + <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, > + <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; > + clock-names = "usbdrd30", "usbdrd30_susp_clk", > + "usbdrd30_axius_clk"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + dwc3@15400000 { > + compatible = "snps,dwc3"; > + reg = <0x15400000 0x10000>; > + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; > + phy-names = "usb2-phy", "usb3-phy"; > + }; > + }; > }; > }; > > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Wed, Jan 18, 2017 at 12:02:52PM +0530, Pankaj Dubey wrote: > From: Vivek Gautam <gautamvivek1987@gmail.com> > > Add USB 3.0 DRD controller device node, with its clock > and phy information to enable the same on Exynos7. > > Signed-off-by: Vivek Gautam <gautamvivek1987@gmail.com> > Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> > Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > arch/arm64/boot/dts/exynos/exynos7.dtsi | 34 +++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 80aa60e..9a3fbed 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -603,6 +603,40 @@ #include "exynos7-trip-points.dtsi" }; }; + + usbdrd_phy: phy@15500000 { + compatible = "samsung,exynos7-usbdrd-phy"; + reg = <0x15500000 0x100>; + clocks = <&clock_fsys0 ACLK_USBDRD300>, + <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, + <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, + <&clock_fsys0 SCLK_USBDRD300_REFCLK>; + clock-names = "phy", "ref", "phy_pipe", + "phy_utmi", "itp"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbdrd3 { + compatible = "samsung,exynos7-dwusb3"; + clocks = <&clock_fsys0 ACLK_USBDRD300>, + <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, + <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; + clock-names = "usbdrd30", "usbdrd30_susp_clk", + "usbdrd30_axius_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3@15400000 { + compatible = "snps,dwc3"; + reg = <0x15400000 0x10000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; }; };