diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 9a7b090..03a73f9 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -444,6 +444,7 @@ config ROCKCHIP_SARADC
 config STM32_ADC_CORE
 	tristate "STMicroelectronics STM32 adc core"
 	depends on ARCH_STM32 || COMPILE_TEST
+	depends on HAS_DMA
 	depends on OF
 	depends on REGULATOR
 	select IIO_BUFFER
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 4214b0c..22b7c93 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -201,6 +201,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	priv->common.base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(priv->common.base))
 		return PTR_ERR(priv->common.base);
+	priv->common.phys_base = res->start;
 
 	priv->vref = devm_regulator_get(&pdev->dev, "vref");
 	if (IS_ERR(priv->vref)) {
diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
index 081fa5f..2ec7abb 100644
--- a/drivers/iio/adc/stm32-adc-core.h
+++ b/drivers/iio/adc/stm32-adc-core.h
@@ -42,10 +42,12 @@
 /**
  * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
  * @base:		control registers base cpu addr
+ * @phys_base:		control registers base physical addr
  * @vref_mv:		vref voltage (mv)
  */
 struct stm32_adc_common {
 	void __iomem			*base;
+	phys_addr_t			phys_base;
 	int				vref_mv;
 };
 
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 9a38f9a..8a30039 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -21,6 +21,8 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/timer/stm32-timer-trigger.h>
@@ -68,12 +70,16 @@
 #define STM32F4_EXTSEL_SHIFT		24
 #define STM32F4_EXTSEL_MASK		GENMASK(27, 24)
 #define STM32F4_EOCS			BIT(10)
+#define STM32F4_DDS			BIT(9)
+#define STM32F4_DMA			BIT(8)
 #define STM32F4_ADON			BIT(0)
 
 #define STM32_ADC_MAX_SQ		16	/* SQ1..SQ16 */
 #define STM32_ADC_TIMEOUT_US		100000
 #define STM32_ADC_TIMEOUT	(msecs_to_jiffies(STM32_ADC_TIMEOUT_US / 1000))
 
+#define STM32_DMA_BUFFER_SIZE		PAGE_SIZE
+
 /* External trigger enable */
 enum stm32_adc_exten {
 	STM32_EXTEN_SWTRIG,
@@ -136,6 +142,10 @@ struct stm32_adc_regs {
  * @bufi:		data buffer index
  * @num_conv:		expected number of scan conversions
  * @trigger_polarity:	external trigger polarity (e.g. exten)
+ * @dma_chan:		dma channel
+ * @rx_buf:		dma rx buffer cpu address
+ * @rx_dma_buf:		dma rx buffer bus address
+ * @rx_buf_sz:		dma rx buffer size
  */
 struct stm32_adc {
 	struct stm32_adc_common	*common;
@@ -148,6 +158,10 @@ struct stm32_adc {
 	unsigned int		bufi;
 	unsigned int		num_conv;
 	u32			trigger_polarity;
+	struct dma_chan		*dma_chan;
+	u8			*rx_buf;
+	dma_addr_t		rx_dma_buf;
+	unsigned int		rx_buf_sz;
 };
 
 /**
@@ -291,10 +305,21 @@ static void stm32_adc_conv_irq_disable(struct stm32_adc *adc)
 /**
  * stm32_adc_start_conv() - Start conversions for regular channels.
  * @adc: stm32 adc instance
+ * @dma: use dma to transfer conversion result
+ *
+ * Start conversions for regular channels.
+ * Also take care of normal or DMA mode. Circular DMA may be used for regular
+ * conversions, in IIO buffer modes. Otherwise, use ADC interrupt with direct
+ * DR read instead (e.g. read_raw, or triggered buffer mode without DMA).
  */
-static void stm32_adc_start_conv(struct stm32_adc *adc)
+static void stm32_adc_start_conv(struct stm32_adc *adc, bool dma)
 {
 	stm32_adc_set_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
+
+	if (dma)
+		stm32_adc_set_bits(adc, STM32F4_ADC_CR2,
+				   STM32F4_DMA | STM32F4_DDS);
+
 	stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_EOCS | STM32F4_ADON);
 
 	/* Wait for Power-up time (tSTAB from datasheet) */
@@ -311,7 +336,8 @@ static void stm32_adc_stop_conv(struct stm32_adc *adc)
 	stm32_adc_clr_bits(adc, STM32F4_ADC_SR, STM32F4_STRT);
 
 	stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
-	stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_ADON);
+	stm32_adc_clr_bits(adc, STM32F4_ADC_CR2,
+			   STM32F4_ADON | STM32F4_DMA | STM32F4_DDS);
 }
 
 /**
@@ -494,7 +520,7 @@ static int stm32_adc_single_conv(struct iio_dev *indio_dev,
 
 	stm32_adc_conv_irq_enable(adc);
 
-	stm32_adc_start_conv(adc);
+	stm32_adc_start_conv(adc, false);
 
 	timeout = wait_for_completion_interruptible_timeout(
 					&adc->completion, STM32_ADC_TIMEOUT);
@@ -581,6 +607,23 @@ static int stm32_adc_validate_trigger(struct iio_dev *indio_dev,
 	return stm32_adc_get_trig_extsel(trig) < 0 ? -EINVAL : 0;
 }
 
+static int stm32_adc_set_watermark(struct iio_dev *indio_dev, unsigned val)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+	unsigned int watermark = STM32_DMA_BUFFER_SIZE / 2;
+
+	/*
+	 * dma cyclic transfers are used, buffer is split into two periods.
+	 * There should be :
+	 * - always one buffer (period) dma is working on
+	 * - one buffer (period) driver can push with iio_trigger_poll().
+	 */
+	watermark = min(watermark, val * sizeof(u16));
+	adc->rx_buf_sz = watermark * 2;
+
+	return 0;
+}
+
 static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
 				      const unsigned long *scan_mask)
 {
@@ -635,12 +678,83 @@ static int stm32_adc_debugfs_reg_access(struct iio_dev *indio_dev,
 static const struct iio_info stm32_adc_iio_info = {
 	.read_raw = stm32_adc_read_raw,
 	.validate_trigger = stm32_adc_validate_trigger,
+	.hwfifo_set_watermark = stm32_adc_set_watermark,
 	.update_scan_mode = stm32_adc_update_scan_mode,
 	.debugfs_reg_access = stm32_adc_debugfs_reg_access,
 	.of_xlate = stm32_adc_of_xlate,
 	.driver_module = THIS_MODULE,
 };
 
+static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
+{
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(adc->dma_chan,
+				     adc->dma_chan->cookie,
+				     &state);
+	if (status == DMA_IN_PROGRESS) {
+		/* Residue is size in bytes from end of buffer */
+		unsigned int i = adc->rx_buf_sz - state.residue;
+		unsigned int size;
+
+		/* Return available bytes */
+		if (i >= adc->bufi)
+			size = i - adc->bufi;
+		else
+			size = adc->rx_buf_sz + i - adc->bufi;
+
+		return size;
+	}
+
+	return 0;
+}
+
+static void stm32_adc_dma_buffer_done(void *data)
+{
+	struct iio_dev *indio_dev = data;
+
+	iio_trigger_poll_chained(indio_dev->trig);
+}
+
+static int stm32_adc_dma_start(struct iio_dev *indio_dev)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+	struct dma_async_tx_descriptor *desc;
+	dma_cookie_t cookie;
+	int ret;
+
+	if (!adc->dma_chan)
+		return 0;
+
+	dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__,
+		adc->rx_buf_sz, adc->rx_buf_sz / 2);
+
+	/* Prepare a DMA cyclic transaction */
+	desc = dmaengine_prep_dma_cyclic(adc->dma_chan,
+					 adc->rx_dma_buf,
+					 adc->rx_buf_sz, adc->rx_buf_sz / 2,
+					 DMA_DEV_TO_MEM,
+					 DMA_PREP_INTERRUPT);
+	if (!desc)
+		return -EBUSY;
+
+	desc->callback = stm32_adc_dma_buffer_done;
+	desc->callback_param = indio_dev;
+
+	cookie = dmaengine_submit(desc);
+	ret = dma_submit_error(cookie);
+	if (ret) {
+		dmaengine_terminate_all(adc->dma_chan);
+		return ret;
+	}
+
+	/* Issue pending DMA requests */
+	dma_async_issue_pending(adc->dma_chan);
+
+	return 0;
+}
+
 static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct stm32_adc *adc = iio_priv(indio_dev);
@@ -652,18 +766,29 @@ static int stm32_adc_buffer_postenable(struct iio_dev *indio_dev)
 		return ret;
 	}
 
+	ret = stm32_adc_dma_start(indio_dev);
+	if (ret) {
+		dev_err(&indio_dev->dev, "Can't start dma\n");
+		goto err_clr_trig;
+	}
+
 	ret = iio_triggered_buffer_postenable(indio_dev);
 	if (ret < 0)
-		goto err_clr_trig;
+		goto err_stop_dma;
 
 	/* Reset adc buffer index */
 	adc->bufi = 0;
 
-	stm32_adc_conv_irq_enable(adc);
-	stm32_adc_start_conv(adc);
+	if (!adc->dma_chan)
+		stm32_adc_conv_irq_enable(adc);
+
+	stm32_adc_start_conv(adc, !!adc->dma_chan);
 
 	return 0;
 
+err_stop_dma:
+	if (adc->dma_chan)
+		dmaengine_terminate_all(adc->dma_chan);
 err_clr_trig:
 	stm32_adc_set_trig(indio_dev, NULL);
 
@@ -676,12 +801,16 @@ static int stm32_adc_buffer_predisable(struct iio_dev *indio_dev)
 	int ret;
 
 	stm32_adc_stop_conv(adc);
-	stm32_adc_conv_irq_disable(adc);
+	if (!adc->dma_chan)
+		stm32_adc_conv_irq_disable(adc);
 
 	ret = iio_triggered_buffer_predisable(indio_dev);
 	if (ret < 0)
 		dev_err(&indio_dev->dev, "predisable failed\n");
 
+	if (adc->dma_chan)
+		dmaengine_terminate_all(adc->dma_chan);
+
 	if (stm32_adc_set_trig(indio_dev, NULL))
 		dev_err(&indio_dev->dev, "Can't clear trigger\n");
 
@@ -701,15 +830,31 @@ static irqreturn_t stm32_adc_trigger_handler(int irq, void *p)
 
 	dev_dbg(&indio_dev->dev, "%s bufi=%d\n", __func__, adc->bufi);
 
-	/* reset buffer index */
-	adc->bufi = 0;
-	iio_push_to_buffers_with_timestamp(indio_dev, adc->buffer,
-					   pf->timestamp);
+	if (!adc->dma_chan) {
+		/* reset buffer index */
+		adc->bufi = 0;
+		iio_push_to_buffers_with_timestamp(indio_dev, adc->buffer,
+						   pf->timestamp);
+	} else {
+		int residue = stm32_adc_dma_residue(adc);
+
+		while (residue >= indio_dev->scan_bytes) {
+			u16 *buffer = (u16 *)&adc->rx_buf[adc->bufi];
+
+			iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+							   pf->timestamp);
+			residue -= indio_dev->scan_bytes;
+			adc->bufi += indio_dev->scan_bytes;
+			if (adc->bufi >= adc->rx_buf_sz)
+				adc->bufi = 0;
+		}
+	}
 
 	iio_trigger_notify_done(indio_dev->trig);
 
 	/* re-enable eoc irq */
-	stm32_adc_conv_irq_enable(adc);
+	if (!adc->dma_chan)
+		stm32_adc_conv_irq_enable(adc);
 
 	return IRQ_HANDLED;
 }
@@ -781,6 +926,45 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
 	return 0;
 }
 
+static int stm32_adc_dma_request(struct iio_dev *indio_dev)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+	struct dma_slave_config config;
+	int ret;
+
+	adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
+	if (!adc->dma_chan)
+		return 0;
+
+	adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
+					 STM32_DMA_BUFFER_SIZE,
+					 &adc->rx_dma_buf, GFP_KERNEL);
+	if (!adc->rx_buf) {
+		goto err_release;
+		ret = -ENOMEM;
+	}
+
+	/* Configure DMA channel to read data register */
+	memset(&config, 0, sizeof(config));
+	config.src_addr = (dma_addr_t)adc->common->phys_base;
+	config.src_addr += adc->offset + STM32F4_ADC_DR;
+	config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+	ret = dmaengine_slave_config(adc->dma_chan, &config);
+	if (ret)
+		goto err_free;
+
+	return 0;
+
+err_free:
+	dma_free_coherent(adc->dma_chan->device->dev, STM32_DMA_BUFFER_SIZE,
+			  adc->rx_buf, adc->rx_dma_buf);
+err_release:
+	dma_release_channel(adc->dma_chan);
+
+	return ret;
+}
+
 static int stm32_adc_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
@@ -842,13 +1026,17 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_clk_disable;
 
+	ret = stm32_adc_dma_request(indio_dev);
+	if (ret < 0)
+		goto err_clk_disable;
+
 	ret = iio_triggered_buffer_setup(indio_dev,
 					 &iio_pollfunc_store_time,
 					 &stm32_adc_trigger_handler,
 					 &stm32_adc_buffer_setup_ops);
 	if (ret) {
 		dev_err(&pdev->dev, "buffer setup failed\n");
-		goto err_clk_disable;
+		goto err_dma_disable;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -862,6 +1050,13 @@ static int stm32_adc_probe(struct platform_device *pdev)
 err_buffer_cleanup:
 	iio_triggered_buffer_cleanup(indio_dev);
 
+err_dma_disable:
+	if (adc->dma_chan) {
+		dma_free_coherent(adc->dma_chan->device->dev,
+				  STM32_DMA_BUFFER_SIZE,
+				  adc->rx_buf, adc->rx_dma_buf);
+		dma_release_channel(adc->dma_chan);
+	}
 err_clk_disable:
 	clk_disable_unprepare(adc->clk);
 
@@ -875,6 +1070,12 @@ static int stm32_adc_remove(struct platform_device *pdev)
 
 	iio_device_unregister(indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
+	if (adc->dma_chan) {
+		dma_free_coherent(adc->dma_chan->device->dev,
+				  STM32_DMA_BUFFER_SIZE,
+				  adc->rx_buf, adc->rx_dma_buf);
+		dma_release_channel(adc->dma_chan);
+	}
 	clk_disable_unprepare(adc->clk);
 
 	return 0;
