diff mbox series

[46/53] arm64: dts: renesas: hihope-common: Add LEDs support

Message ID 1485b6353a9940c5ac5d3f90880207ac95b4e350.1561107232.git.horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show
Series [GIT,PULL] Renesas ARM64 Based SoC DT Updates for v5.3 | expand

Commit Message

Simon Horman June 21, 2019, 9:16 a.m. UTC 
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

This patch adds LEDs support to the HiHope RZ/G2[MN] Main Board
common device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/hihope-common.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 6a45c49c24dc..625c3aaead14 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -17,6 +17,30 @@ 
 		stdout-path = "serial0:115200n8";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+		};
+
+		led1 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+
+		led2 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+
+		led3 {
+			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
 	reg_1p8v: regulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";