@@ -295,7 +295,7 @@
&vpif {
pinctrl-names = "default";
- pinctrl-0 = <&vpif_capture_pins>;
+ pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
status = "okay";
/* VPIF capture port */
@@ -218,8 +218,21 @@
0x3c 0x11111111 0xffffffff
/* VP_DIN[8..9] */
0x40 0x00000011 0x000000ff
- /* VP_CLKIN3, VP_CLKIN2 */
- 0x4c 0x00010100 0x000f0f00
+ >;
+ };
+ vpif_display_pins: vpif_display_pins {
+ pinctrl-single,bits = <
+ /* VP_DOUT[2..7] */
+ 0x40 0x11111100 0xffffff00
+ /* VP_DOUT[10..15,0..1] */
+ 0x44 0x11111111 0xffffffff
+ /* VP_DOUT[8..9] */
+ 0x48 0x00000011 0x000000ff
+ /*
+ * VP_CLKOUT3, VP_CLKIN3,
+ * VP_CLKOUT2, VP_CLKIN2
+ */
+ 0x4c 0x00111100 0x00ffff00
>;
};
};
Add a new pinctrl sub-node for vpif display pins. Move VP_CLKIN3 and VP_CLKIN2 to the display node where they actually belong (vide section 35.2.2 of the da850 datasheet). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/boot/dts/da850-evm.dts | 2 +- arch/arm/boot/dts/da850.dtsi | 17 +++++++++++++++-- 2 files changed, 16 insertions(+), 3 deletions(-)